topaLE
/
ahoy
mirror of https://github.com/lumapu/ahoy.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
Browse Source

MI command review 

Payload now will be build according to xlsx, but note: this seems not to work at least for the MI-600 used for testing...
- non-persistent relative  will treated as short percentage messages (may need review, if multiplying by 10 is needed!)
- non-persistent absolute will treated same as "as is" in DTUSimMI, so always "10%" will be filled as percentage (this may not work for all type of MI)
- persistent will be handled as DRED command, allowing only a few presets. So use absolute values, these will be translated as follows:
-- 0x55AA	 Boot without DRM restrictions (value higher than double of inverter max power (IMP))
-- 0xA5A5	 DRM0 shutdown (not supported yet)
-- 0x5A5A	 DRM5 power limit 0% (values lower than 25% of IMP)
-- 0xAA55	 DRM6 power limit 50% (values between 25% and 75% of IMP)
-- 0x5A55	 DRM8 unlimited power operation (values between 75% and 100% of IMP)
pull/1190/head
rejoe2 2 years ago
committed by GitHub
parent
963e618c5c
commit
03b295b6b8
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
3 changed files with 136 additions and 58 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 4
      src/hm/hmInverter.h
  2. 66
      src/hm/hmRadio.h
  3. 124
      src/hm/miPayload.h

4
src/hm/hmInverter.h
View File

@ -142,7 +142,7 @@ class Inverter {
uint8_t channels; // number of PV channels (1-4) uint8_t channels; // number of PV channels (1-4)
record_t<REC_TYP> recordMeas; // structure for measured values record_t<REC_TYP> recordMeas; // structure for measured values
record_t<REC_TYP> recordInfo; // structure for info values record_t<REC_TYP> recordInfo; // structure for info values
record_t<REC_TYP> recordHwInfo; // structure for simple (hardware) info values record_t<REC_TYP> recordHwInfo; // structure for simple (hardware) info values
record_t<REC_TYP> recordConfig; // structure for system config values record_t<REC_TYP> recordConfig; // structure for system config values
record_t<REC_TYP> recordAlarm; // structure for alarm values record_t<REC_TYP> recordAlarm; // structure for alarm values
bool initialized; // needed to check if the inverter was correctly added (ESP32 specific - union types are never null) bool initialized; // needed to check if the inverter was correctly added (ESP32 specific - union types are never null)
@ -152,7 +152,7 @@ class Inverter {
uint8_t alarmNxtWrPos; // indicates the position in array (rolling buffer) uint8_t alarmNxtWrPos; // indicates the position in array (rolling buffer)
uint16_t alarmCnt; // counts the total number of occurred alarms uint16_t alarmCnt; // counts the total number of occurred alarms
uint16_t alarmLastId; // lastId which was received uint16_t alarmLastId; // lastId which was received
int8_t rssi; // HMS and HMT inverters only int8_t rssi; // accurate for HMS and HMT inverters only
static uint32_t *timestamp; // system timestamp static uint32_t *timestamp; // system timestamp

66
src/hm/hmRadio.h
View File

@ -169,7 +169,7 @@ class HmRadio {
mSerialDebug = true; mSerialDebug = true;
} }
void sendControlPacket(uint64_t invId, uint8_t cmd, uint16_t *data, bool isRetransmit, bool isNoMI = true, bool is4chMI = false) { void sendControlPacket(uint64_t invId, uint8_t cmd, uint16_t *data, bool isRetransmit, bool isNoMI = true, uint16_t powerMax = 0) {
DPRINT(DBG_INFO, F("sendControlPacket cmd: 0x")); DPRINT(DBG_INFO, F("sendControlPacket cmd: 0x"));
DBGHEXLN(cmd); DBGHEXLN(cmd);
initPacket(invId, TX_REQ_DEVCONTROL, SINGLE_FRAME); initPacket(invId, TX_REQ_DEVCONTROL, SINGLE_FRAME);
@ -185,6 +185,7 @@ class HmRadio {
} }
} else { //MI 2nd gen. specific } else { //MI 2nd gen. specific
switch (cmd) { switch (cmd) {
case Restart:
case TurnOn: case TurnOn:
//mTxBuf[0] = 0x50; //mTxBuf[0] = 0x50;
mTxBuf[9] = 0x55; mTxBuf[9] = 0x55;
@ -195,21 +196,54 @@ class HmRadio {
mTxBuf[10] = 0x55; mTxBuf[10] = 0x55;
break; break;
case ActivePowerContr: case ActivePowerContr:
mTxBuf[9] = 0x5a; if (data[1]<256) { // non persistent
mTxBuf[10] = 0x5a; mTxBuf[9] = 0x5a;
//Testing only! Original NRF24_DTUMIesp.ino code #L612-L613: mTxBuf[10] = 0x5a;
//UsrData[0]=0x5A;UsrData[1]=0x5A;UsrData[2]=100;//0x0a;// 10% limit //Testing only! Original NRF24_DTUMIesp.ino code #L612-L613:
//UsrData[3]=((Limit*10) >> 8) & 0xFF; UsrData[4]= (Limit*10) & 0xFF; //WR needs 1 dec= zB 100.1 W //UsrData[0]=0x5A;UsrData[1]=0x5A;UsrData[2]=100;//0x0a;// 10% limit
if (is4chMI) { //UsrData[3]=((Limit*10) >> 8) & 0xFF; UsrData[4]= (Limit*10) & 0xFF; //WR needs 1 dec= zB 100.1 W
mTxBuf[cnt++] = 100; //10% limit, seems to be necessary to send sth. at all, but for MI-1500 this has no effect if (!data[1]) { // AbsolutNonPersistent
//works (if ever!) only for absulute power limits! mTxBuf[++cnt] = 100; //10% limit, seems to be necessary to send sth. at all, but for MI-1500 this has no effect
mTxBuf[cnt++] = ((data[0] * 10) >> 8) & 0xff; // power limit //works (if ever!) only for absulute power limits!
mTxBuf[cnt++] = ((data[0] * 10) ) & 0xff; // power limit mTxBuf[++cnt] = ((data[0] * 10) >> 8) & 0xff; // power limit in W
} else { mTxBuf[++cnt] = ((data[0] * 10) ) & 0xff; // power limit in W
mTxBuf[cnt++] = data[0]*10; // power limit } else if (powerMax) { //relative, but 4ch-MI (if ever) only accepts absolute values
mTxBuf[++cnt] = data[0]; // simple power limit in %, might be necessary to multiply by 10?
mTxBuf[++cnt] = ((data[0] * 10 * powerMax) >> 8) & 0xff; // power limit
mTxBuf[++cnt] = ((data[0] * 10 * powerMax) ) & 0xff; // power limit
} else { // might work for 1/2ch MI (if ever)
mTxBuf[++cnt] = data[0]; // simple power limit in %, might be necessary to multiply by 10?
}
} else { // persistent power limit needs to be translated in DRED command (?)
/* DRED instruction
Order Function
0x55AA Boot without DRM restrictions
0xA5A5 DRM0 shutdown
0x5A5A DRM5 power limit 0%
0xAA55 DRM6 power limit 50%
0x5A55 DRM8 unlimited power operation
*/
mTxBuf[0] = 0x50;
if (data[1] == 256UL) { // AbsolutPersistent
if (data[0] == 0 && !powerMax) {
mTxBuf[9] = 0xa5;
mTxBuf[10] = 0xa5;
} else if (data[0] == 0 || !powerMax || data[0] < powerMax/4 ) {
mTxBuf[9] = 0x5a;
mTxBuf[10] = 0x5a;
} else if (data[0] <= powerMax/4*3) {
mTxBuf[9] = 0xaa;
mTxBuf[10] = 0x55;
} else if (data[0] <= powerMax) {
mTxBuf[9] = 0x5a;
mTxBuf[10] = 0x55;
} else if (data[0] > powerMax*2) {
mTxBuf[9] = 0x55;
mTxBuf[10] = 0xaa;
}
}
} }
break; break;
default: default:
return; return;
@ -254,7 +288,7 @@ class HmRadio {
bool mSerialDebug; bool mSerialDebug;
private: private:
bool getReceived(void) { bool getReceived(void) {
bool tx_ok, tx_fail, rx_ready; bool tx_ok, tx_fail, rx_ready;
mNrf24.whatHappened(tx_ok, tx_fail, rx_ready); // resets the IRQ pin to HIGH mNrf24.whatHappened(tx_ok, tx_fail, rx_ready); // resets the IRQ pin to HIGH

124
src/hm/miPayload.h
View File

@ -26,6 +26,7 @@ typedef struct {
uint8_t invId; uint8_t invId;
uint8_t retransmits; uint8_t retransmits;
bool gotFragment; bool gotFragment;
bool gotGPF;
uint8_t rtrRes; // for limiting resets uint8_t rtrRes; // for limiting resets
uint8_t multi_parts; // for quality uint8_t multi_parts; // for quality
bool rxTmo; bool rxTmo;
@ -49,7 +50,8 @@ class MiPayload {
mTimestamp = timestamp; mTimestamp = timestamp;
for(uint8_t i = 0; i < MAX_NUM_INVERTERS; i++) { for(uint8_t i = 0; i < MAX_NUM_INVERTERS; i++) {
reset(i, false, true); reset(i, false, true);
mPayload[i].limitrequested = true; mPayload[i].limitrequested = false;
mPayload[i].gotGPF = false;
} }
mSerialDebug = false; mSerialDebug = false;
mHighPrioIv = NULL; mHighPrioIv = NULL;
@ -124,10 +126,12 @@ class MiPayload {
DBGPRINT(F("Devcontrol request 0x")); DBGPRINT(F("Devcontrol request 0x"));
DHEX(iv->devControlCmd); DHEX(iv->devControlCmd);
DBGPRINT(F(" power limit ")); DBGPRINT(F(" power limit "));
DBGPRINTLN(String(iv->powerLimit[0])); DBGPRINT(String(iv->powerLimit[0]));
DBGPRINT(F(" with PowerLimitControl "));
DBGPRINTLN(String(iv->powerLimit[1]));
} }
iv->powerLimitAck = false; iv->powerLimitAck = false;
mRadio->sendControlPacket(iv->radioId.u64, iv->devControlCmd, iv->powerLimit, false, false, iv->type == INV_TYPE_4CH); mRadio->sendControlPacket(iv->radioId.u64, iv->devControlCmd, iv->powerLimit, false, false, iv->powerLimit[1] == RelativNonPersistent ? 0 : iv->getMaxPower()); // might be dependent on IV-Type as well, iv->type == INV_TYPE_4CH?
mPayload[iv->id].txCmd = iv->devControlCmd; mPayload[iv->id].txCmd = iv->devControlCmd;
mPayload[iv->id].limitrequested = true; mPayload[iv->id].limitrequested = true;
@ -136,17 +140,18 @@ class MiPayload {
uint8_t cmd = iv->getQueuedCmd(); uint8_t cmd = iv->getQueuedCmd();
uint8_t cmd2 = cmd; uint8_t cmd2 = cmd;
if ( cmd == SystemConfigPara ) { //0x05 for HM-types if ( cmd == SystemConfigPara ) { //0x05 for HM-types
if (!mPayload[iv->id].limitrequested) { // only do once at startup if (mPayload[iv->id].gotGPF) {
iv->setQueuedCmdFinished(); iv->setQueuedCmdFinished();
cmd = iv->getQueuedCmd(); cmd = iv->getQueuedCmd();
} else {
mPayload[iv->id].limitrequested = false;
} }
} }
if (cmd == 0x01 || cmd == SystemConfigPara ) { //0x1 and 0x05 for HM-types if (cmd == 0x01) { //0x1 for HM-types
cmd2 = cmd == SystemConfigPara ? 0x01 : 0x00; //perhaps we can only try to get second frame? cmd2 = 0x00;
cmd = 0x0f; // for MI, these seem to make part of polling the device software and hardware version number command cmd = 0x0f; // for MI, these seem to make part of polling the device software and hardware version number command
} else if (cmd == SystemConfigPara ) { // 0x05 for HM-types
cmd2 = 0x00;
cmd = 0x10; // legacy GPF request
} }
if (mSerialDebug) { if (mSerialDebug) {
DPRINT_IVID(DBG_INFO, iv->id); DPRINT_IVID(DBG_INFO, iv->id);
@ -177,21 +182,24 @@ class MiPayload {
else if (p->packet[0] == (0x11 + SINGLE_FRAME)) { // 0x92; MI status response to 0x11 else if (p->packet[0] == (0x11 + SINGLE_FRAME)) { // 0x92; MI status response to 0x11
miStsDecode(iv, p, CH2); miStsDecode(iv, p, CH2);
}
else if ( p->packet[0] == 0x09 + ALL_FRAMES || } else if ( p->packet[0] == 0x09 + ALL_FRAMES ||
p->packet[0] == 0x11 + ALL_FRAMES || p->packet[0] == 0x11 + ALL_FRAMES ||
( p->packet[0] >= (0x36 + ALL_FRAMES) && p->packet[0] < (0x39 + SINGLE_FRAME) ( p->packet[0] >= (0x36 + ALL_FRAMES) && p->packet[0] < (0x39 + SINGLE_FRAME)
&& mPayload[iv->id].txCmd != 0x0f) ) { // small MI or MI 1500 data responses to 0x09, 0x11, 0x36, 0x37, 0x38 and 0x39 && mPayload[iv->id].txCmd != 0x0f) ) { // small MI or MI 1500 data responses to 0x09, 0x11, 0x36, 0x37, 0x38 and 0x39
mPayload[iv->id].txId = p->packet[0]; mPayload[iv->id].txId = p->packet[0];
miDataDecode(iv,p); miDataDecode(iv,p);
}
else if (p->packet[0] == ( 0x0f + ALL_FRAMES)) { } else if (p->packet[0] == ( 0x0f + ALL_FRAMES)) {
// MI response from get hardware information request // MI response from get hardware information request
miHwDecode(iv, p); miHwDecode(iv, p);
mPayload[iv->id].txId = p->packet[0]; mPayload[iv->id].txId = p->packet[0];
} else if (p->packet[0] == ( 0x10 + ALL_FRAMES)) {
// MI response from get Grid Profile information request
miGPFDecode(iv, p);
mPayload[iv->id].txId = p->packet[0];
} else if ( p->packet[0] == (TX_REQ_INFO + ALL_FRAMES) // response from get information command } else if ( p->packet[0] == (TX_REQ_INFO + ALL_FRAMES) // response from get information command
|| (p->packet[0] == 0xB6 && mPayload[iv->id].txCmd != 0x36)) { // strange short response from MI-1500 3rd gen; might be misleading! || (p->packet[0] == 0xB6 && mPayload[iv->id].txCmd != 0x36)) { // strange short response from MI-1500 3rd gen; might be misleading!
// atm, we just do nothing else than print out what we got... // atm, we just do nothing else than print out what we got...
@ -211,11 +219,13 @@ class MiPayload {
} }
} else if (p->packet[0] == (TX_REQ_DEVCONTROL + ALL_FRAMES ) // response from dev control command } else if (p->packet[0] == (TX_REQ_DEVCONTROL + ALL_FRAMES ) // response from dev control command
|| p->packet[0] == (TX_REQ_DEVCONTROL + ALL_FRAMES -1)) { // response from DRED instruction || p->packet[0] == (TX_REQ_DEVCONTROL + ALL_FRAMES -1)) { // response from DRED instruction
DPRINT_IVID(DBG_DEBUG, iv->id); if (mSerialDebug) {
DBGPRINTLN(F("Response from devcontrol request received")); DPRINT_IVID(DBG_DEBUG, iv->id);
DBGPRINTLN(F("Response from devcontrol request received"));
}
mPayload[iv->id].txId = p->packet[0]; mPayload[iv->id].txId = p->packet[0];
iv->clearDevControlRequest(); iv->clearDevControlRequest();
mStat->rxSuccess++;
if ((p->packet[9] == 0x5a) && (p->packet[10] == 0x5a)) { if ((p->packet[9] == 0x5a) && (p->packet[10] == 0x5a)) {
mApp->setMqttPowerLimitAck(iv); mApp->setMqttPowerLimitAck(iv);
@ -228,7 +238,8 @@ class MiPayload {
DBGPRINTLN(String(iv->powerLimit[1])); DBGPRINTLN(String(iv->powerLimit[1]));
} }
iv->clearCmdQueue(); iv->clearCmdQueue();
iv->enqueCommand<InfoCommand>(SystemConfigPara); // read back power limit //does not work for MI
//iv->enqueCommand<InfoCommand>(SystemConfigPara); // read back power limit
} }
iv->devControlCmd = Init; iv->devControlCmd = Init;
} else { // some other response; copied from hmPayload:process; might not be correct to do that here!!! } else { // some other response; copied from hmPayload:process; might not be correct to do that here!!!
@ -309,7 +320,8 @@ class MiPayload {
(mPayload[iv->id].txId != (0x88)) && (mPayload[iv->id].txId != (0x88)) &&
(mPayload[iv->id].txId != (0x92)) && (mPayload[iv->id].txId != (0x92)) &&
(mPayload[iv->id].txId != 0 && (mPayload[iv->id].txId != 0 &&
mPayload[iv->id].txCmd != 0x0f)) { mPayload[iv->id].txCmd != 0x0f
&& !iv->getDevControlRequest())) {
// no processing needed if txId is not one of 0x95, 0x88, 0x89, 0x91, 0x92 or response to 0x36ff // no processing needed if txId is not one of 0x95, 0x88, 0x89, 0x91, 0x92 or response to 0x36ff
mPayload[iv->id].complete = true; mPayload[iv->id].complete = true;
mPayload[iv->id].rxTmo = true; mPayload[iv->id].rxTmo = true;
@ -330,7 +342,7 @@ class MiPayload {
} else if(iv->devControlCmd == ActivePowerContr) { } else if(iv->devControlCmd == ActivePowerContr) {
DPRINT_IVID(DBG_INFO, iv->id); DPRINT_IVID(DBG_INFO, iv->id);
DBGPRINTLN(F("retransmit power limit")); DBGPRINTLN(F("retransmit power limit"));
mRadio->sendControlPacket(iv->radioId.u64, iv->devControlCmd, iv->powerLimit, true, false); mRadio->sendControlPacket(iv->radioId.u64, iv->devControlCmd, iv->powerLimit, true, false, iv->getMaxPower());
} else { } else {
uint8_t cmd = mPayload[iv->id].txCmd; uint8_t cmd = mPayload[iv->id].txCmd;
if (mPayload[iv->id].retransmits < mMaxRetrans) { if (mPayload[iv->id].retransmits < mMaxRetrans) {
@ -339,6 +351,7 @@ class MiPayload {
DPRINT_IVID(DBG_INFO, iv->id); DPRINT_IVID(DBG_INFO, iv->id);
DBGPRINTLN(F("nothing received")); DBGPRINTLN(F("nothing received"));
mPayload[iv->id].retransmits = mMaxRetrans; mPayload[iv->id].retransmits = mMaxRetrans;
mPayload[iv->id].requested = false; //close failed request
} else if( !mPayload[iv->id].gotFragment && !mPayload[iv->id].rxTmo ) { } else if( !mPayload[iv->id].gotFragment && !mPayload[iv->id].rxTmo ) {
DPRINT_IVID(DBG_INFO, iv->id); DPRINT_IVID(DBG_INFO, iv->id);
DBGPRINTLN(F("retransmit on failed first request")); DBGPRINTLN(F("retransmit on failed first request"));
@ -475,17 +488,29 @@ class MiPayload {
} }
uint16_t prntsts = statusMi == 3 ? 1 : statusMi; uint16_t prntsts = statusMi == 3 ? 1 : statusMi;
bool stsok = true;
if ( statusMi != mPayload[iv->id].sts[stschan] ) { //sth.'s changed? if ( statusMi != mPayload[iv->id].sts[stschan] ) { //sth.'s changed?
iv->alarmCnt = 1; // minimum... iv->alarmCnt = 1; // minimum...
if ((iv->type != INV_TYPE_1CH) && ((statusMi != 3) //sth is or was wrong! //sth is or was wrong?
|| ((mPayload[iv->id].sts[stschan] && statusMi == 3) && (mPayload[iv->id].sts[stschan] != 3))) if ( (iv->type != INV_TYPE_1CH) && ( (statusMi != 3)
|| ((mPayload[iv->id].sts[stschan]) && (statusMi == 3) && (mPayload[iv->id].sts[stschan] != 3)))
) { ) {
iv->lastAlarm[stschan] = alarm_t(prntsts, mPayload[iv->id].ts,mPayload[iv->id].ts); iv->lastAlarm[stschan] = alarm_t(prntsts, mPayload[iv->id].ts,0);
iv->alarmCnt = iv->type == INV_TYPE_2CH ? 3 : 5; iv->alarmCnt = iv->type == INV_TYPE_2CH ? 3 : 5;
iv->alarmLastId = iv->alarmMesIndex;
} }
iv->alarmLastId = prntsts; //iv->alarmMesIndex;
mPayload[iv->id].sts[stschan] = statusMi; mPayload[iv->id].sts[stschan] = statusMi;
stsok = false;
if (iv->alarmCnt > 1) { //more than one channel
for (uint8_t ch = 0; ch < (iv->alarmCnt); ++ch) { //start with 1
if (mPayload[iv->id].sts[ch] == 3) {
stsok = true;
break;
}
}
}
if (mSerialDebug) { if (mSerialDebug) {
DPRINT(DBG_WARN, F("New state on CH")); DPRINT(DBG_WARN, F("New state on CH"));
DBGPRINT(String(stschan)); DBGPRINT(F(" (")); DBGPRINT(String(stschan)); DBGPRINT(F(" ("));
@ -494,9 +519,11 @@ class MiPayload {
} }
} }
if ( !mPayload[iv->id].sts[0] || prntsts < mPayload[iv->id].sts[0] ) { //if ( !mPayload[iv->id].sts[0] || prntsts < mPayload[iv->id].sts[0] ) {
mPayload[iv->id].sts[0] = prntsts; //mPayload[iv->id].sts[0] = prntsts;
if (!stsok) {
iv->setValue(iv->getPosByChFld(0, FLD_EVT, rec), rec, prntsts); iv->setValue(iv->getPosByChFld(0, FLD_EVT, rec), rec, prntsts);
iv->lastAlarm[0] = alarm_t(prntsts, mPayload[iv->id].ts, 0);
} }
if (iv->alarmMesIndex < rec->record[iv->getPosByChFld(0, FLD_EVT, rec)]) { if (iv->alarmMesIndex < rec->record[iv->getPosByChFld(0, FLD_EVT, rec)]) {
@ -506,21 +533,7 @@ class MiPayload {
DBGPRINT(F("alarm ID incremented to ")); DBGPRINT(F("alarm ID incremented to "));
DBGPRINTLN(String(iv->alarmMesIndex)); DBGPRINTLN(String(iv->alarmMesIndex));
} }
iv->lastAlarm[0] = alarm_t(prntsts, mPayload[iv->id].ts, mPayload[iv->id].ts);
} }
/*if(AlarmData == mPayload[iv->id].txCmd) {
uint8_t i = 0;
uint16_t code;
uint32_t start, end;
while(1) {
code = iv->parseAlarmLog(i++, payload, payloadLen, &start, &end);
if(0 == code)
break;
if (NULL != mCbAlarm)
(mCbAlarm)(code, start, end);
yield();
}
}*/
} }
void miDataDecode(Inverter<> *iv, packet_t *p) { void miDataDecode(Inverter<> *iv, packet_t *p) {
@ -758,6 +771,37 @@ const byteAssign_t InfoAssignment[] = {
mPayload[iv->id].requested= false; mPayload[iv->id].requested= false;
mStat->rxSuccess++; mStat->rxSuccess++;
} }
if (mHighPrioIv == NULL)
mHighPrioIv = iv;
}
void miGPFDecode(Inverter<> *iv, packet_t *p ) {
mPayload[iv->id].gotFragment = true;
mPayload[iv->id].gotGPF = true;
record_t<> *rec = iv->getRecordStruct(InverterDevInform_Simple); // choose the record structure
rec->ts = mPayload[iv->id].ts;
iv->setValue(2, rec, (uint32_t) (((p->packet[10] << 8) | p->packet[11]))); //FLD_GRID_PROFILE_CODE
iv->setValue(3, rec, (uint32_t) (((p->packet[12] << 8) | p->packet[13]))); //FLD_GRID_PROFILE_VERSION
iv->setQueuedCmdFinished();
mStat->rxSuccess++;
/* according to xlsx (different start byte -1!)
Polling Grid-connected Protection Parameter File Command - Receipt
byte[10] ST1 indicates the status of the grid-connected protection file. ST1=1 indicates the default grid-connected protection file, ST=2 indicates that the grid-connected protection file is configured and normal, ST=3 indicates that the grid-connected protection file cannot be recognized, ST=4 indicates that the grid-connected protection file is damaged
byte[11] byte[12] CountryStd variable indicates the national standard code of the grid-connected protection file
byte[13] byte[14] Version indicates the version of the grid-connected protection file
byte[15] byte[16]
*/
if(mSerialDebug) {
DPRINT(DBG_INFO,F("ST1 "));
DBGPRINTLN(String(p->packet[9]));
DPRINT(DBG_INFO,F("CountryStd "));
DBGPRINTLN(String((p->packet[10] << 8) + p->packet[11]));
DPRINT(DBG_INFO,F("Version "));
DBGPRINTLN(String((p->packet[12] << 8) + p->packet[13]));
}
if (mHighPrioIv == NULL)
mHighPrioIv = iv;
} }
void reset(uint8_t id, bool setTxTmo = true, bool clrSts = false) { void reset(uint8_t id, bool setTxTmo = true, bool clrSts = false) {
@ -777,8 +821,8 @@ const byteAssign_t InfoAssignment[] = {
mPayload[id].txCmd = 0; mPayload[id].txCmd = 0;
mPayload[id].requested = false; mPayload[id].requested = false;
mPayload[id].ts = *mTimestamp; mPayload[id].ts = *mTimestamp;
mPayload[id].sts[0] = 0;
if (clrSts) { // only clear channel states at startup if (clrSts) { // only clear channel states at startup
mPayload[id].sts[0] = 0;
mPayload[id].sts[CH1] = 0; mPayload[id].sts[CH1] = 0;
mPayload[id].sts[CH2] = 0; mPayload[id].sts[CH2] = 0;
mPayload[id].sts[CH3] = 0; mPayload[id].sts[CH3] = 0;

Write Preview
Loading…
Cancel
Save