diff --git a/.github/ISSUE_TEMPLATE/report-ahoy.md b/.github/ISSUE_TEMPLATE/report-ahoy.md
new file mode 100644
index 00000000..f1f052a2
--- /dev/null
+++ b/.github/ISSUE_TEMPLATE/report-ahoy.md
@@ -0,0 +1,64 @@
+---
+name: Report Ahoy
+about: question about Ahoy
+title: ''
+labels: ''
+assignees: ''
+
+---
+
+Hardware
+Modelname: _
+[ ] ESP8266
+[ ] ESP32
+[ ] Raspberry Pi
+
+nRF24L01+ Module
+[ ] nRF24L01+ you verified this is a Plus model capable of the required 256kBit/s mode
+[ ] square dot indicates original Nordic Semicon chip 
+[ ] round dot indicates copy-cat / counterfeit SI labs chip
+
+Antenna:
+[ ] circuit Board
+[ ] external Antenna
+
+Power Stabilization:
+[ ]  100uF Electrolytic Capacitor 
+connected between +3.3V and GND (Pin 1 & 2) of the NRF Module
+[ ] Voltage stabilizing motherboard
+
+Connection diagram:
+[ ] Image of the your wiring attached
+Connection diagram you used:
+| nRF24L01+ Pin | ESP8266/32 GPIO |
+| -----------------  | ---------------------- |
+| Pin 1 GND []     |  GND                          |
+| Pin 2 +3.3V       |  +3.3V                        |
+| Pin 3 CE              | GPIO_2/_4 CE        |
+| Pin 4 CSN          | GPIO15/_5 CS         |
+| Pin 5 SCK           | GPIO14/18 SCLK    |
+| Pin 6 MOSI        | GPIO13/23 MOSI   |
+| Pin 7 MISO        | GPIO12/19 MISO   |
+| Pin 8 IRQ            | GPIO_0/0 IRQ     |
+Note: [] GND Pin 1 has a square mark on the nRF24L01+ module
+
+Software
+[ ] AhoyDTU
+[ ] OpenDTU
+Version: 
+Github Hash: 
+
+Build & Flash Method:
+[ ] Platform IO
+[ ] Arduino
+[ ] ESP Tools
+Version: 
+
+Desktop OS:
+[ ] Linux
+[ ] Windows
+[ ] Mac OS
+
+Debugging:
+[ ] USB Serial Log (attached)
+[ ] Setup settings (use our templates ... to be added)