diff --git a/layouts/flash/flash.html b/layouts/flash/flash.html
index 31a43824..35e42e01 100644
--- a/layouts/flash/flash.html
+++ b/layouts/flash/flash.html
@@ -29,11 +29,12 @@
- a Your ESP opens an WiFi access point (AP) with SSID AHOY-DTU
- b Connect to this WiFi with some client (Laptop, Smartphone)
- - c The default password is esp_8266
- - d Navigate to the Settings page
- - e Open the section WiFi and press Scan
- - f Select your home network and type your password
- - g Scroll down, check Reboot device after successful save and press save
+ - c Browse to the ESPs IP http://192.168.1.1/setup
+ - d The default password is esp_8266
+ - e Navigate to the Settings page
+ - f Open the section WiFi and press Scan
+ - g Select your home network and type your password
+ - h Scroll down, check Reboot device after successful save and press save
@@ -52,6 +53,14 @@
option b
+
+ Ping from your console / terminal the ESPs network name ping ahoy-dtu
+
+
+
+
+ option c
+
Check devices listed in your WiFi router (eg. Fritz!Box). You should be able to find an IP-address like 192.168.x.x
@@ -59,7 +68,17 @@
4 Settings
- Point to Settings again and configure the device on your needs.
+
+
+
+ - a Point to Settings again and configure the device on your needs.
+ - b enter the 12-digit serial number and a name for your inverter
+ - c add the maximum watt peak value and optional a name for each input
+ - d check that the time has been set (on index page)
+ - e finally reboot the ESP device to make sure everything works as intended
+
+
+