From 8217448d3ee09eee6e4c1e715bbac6c74f9235a4 Mon Sep 17 00:00:00 2001
From: lumapu <lp@lufami.de>
Date: Mon, 12 Aug 2024 22:38:43 +0200
Subject: [PATCH 1/8] 0.8.136 * fix save settings for ESP32 devices #1720

---
 src/CHANGES.md          |  3 +++
 src/defines.h           |  2 +-
 src/web/html/setup.html | 35 ++++++++++++++++++-----------------
 3 files changed, 22 insertions(+), 18 deletions(-)

diff --git a/src/CHANGES.md b/src/CHANGES.md
index dccaa36a..e8b984e2 100644
--- a/src/CHANGES.md
+++ b/src/CHANGES.md
@@ -1,5 +1,8 @@
 # Development Changes
 
+## 0.8.136 - 2024-08-12
+* fix save settings for ESP32 devices #1720
+
 ## 0.8.135 - 2024-08-11
 * translated `/system` #1717
 * added default pin seetings for opendtufusion board
diff --git a/src/defines.h b/src/defines.h
index b1d7395d..fd6675cd 100644
--- a/src/defines.h
+++ b/src/defines.h
@@ -13,7 +13,7 @@
 //-------------------------------------
 #define VERSION_MAJOR       0
 #define VERSION_MINOR       8
-#define VERSION_PATCH       135
+#define VERSION_PATCH       136
 //-------------------------------------
 typedef struct {
     uint8_t ch;
diff --git a/src/web/html/setup.html b/src/web/html/setup.html
index 63b700bf..e7862489 100644
--- a/src/web/html/setup.html
+++ b/src/web/html/setup.html
@@ -682,20 +682,21 @@
             }
 
             function parseSys(obj) {
-                for(var i of [["device", "device_name"], ["ssid", "ssid"], ["ap_pwd", "ap_pwd"]])
-                    document.getElementsByName(i[0])[0].value = obj[i[1]];
-                document.getElementsByName("hidd")[0].checked = obj["hidd"];
+                document.getElementsByName("device")[0].value = obj.device_name;
+                for(var i of [["ssid", "ssid"], ["ap_pwd", "ap_pwd"]])
+                    document.getElementsByName(i[0])[0].value = obj.network[i[1]];
+                document.getElementsByName("hidd")[0].checked = obj.network.hidd;
 
-                document.getElementsByName("darkMode")[0].checked = obj["dark_mode"];
-                document.getElementsByName("schedReboot")[0].checked = obj["sched_reboot"];
+                document.getElementsByName("darkMode")[0].checked = obj.dark_mode;
+                document.getElementsByName("schedReboot")[0].checked = obj.sched_reboot;
                 e = document.getElementsByName("adminpwd")[0];
-                if(!obj["pwd_set"])
+                if(!obj.pwd_set)
                     e.value = "";
                 var d = document.getElementById("prot_mask");
                 var a = ["Index", "{#NAV_LIVE}", "{#NAV_WEBSERIAL}", "{#NAV_SETTINGS}", "Update", "System", "{#NAV_HISTORY}"];
                 var el = [];
                 for(var i = 0; i < 7; i++) {
-                    var chk = ((obj["prot_mask"] & (1 << i)) == (1 << i));
+                    var chk = ((obj.prot_mask & (1 << i)) == (1 << i));
                     el.push(mlCb("protMask" + i, a[i], chk))
                 }
                 d.append(...el);
@@ -720,7 +721,7 @@
                     document.getElementsByName("cstLnkTxt")[0].value = obj.cst_lnk_txt
                 }
 
-                ts = obj["ts_now"];
+                ts = obj.ts_now;
                 window.setInterval("tick()", 1000);
             }
 
@@ -1330,23 +1331,23 @@
 
             function parse(root) {
                 if(null != root) {
-                    parseGeneric(root["generic"]);
-                    parseSys(root["system"]);
-                    parseStaticIp(root["static_ip"]);
-                    parseMqtt(root["mqtt"]);
-                    parseNtp(root["ntp"]);
-                    parseSun(root["sun"]);
+                    parseGeneric(root.generic);
+                    parseSys(root.system);
+                    parseStaticIp(root.static_ip);
+                    parseMqtt(root.mqtt);
+                    parseNtp(root.ntp);
+                    parseSun(root.sun);
                     parsePinout(root.pinout);
-                    parseNrfRadio(root["radioNrf"], root["pinout"]);
+                    parseNrfRadio(root.radioNrf, root.pinout);
                     /*IF_ESP32*/
                     parseCmtRadio(root.radioCmt);
                     /*ENDIF_ESP32*/
                     /*IF_ETHERNET*/
                     parseEth(root.eth)
                     /*ENDIF_ETHERNET*/
-                    parseSerial(root["serial"]);
+                    parseSerial(root.serial);
                     /*IF_PLUGIN_DISPLAY*/
-                    parseDisplay(root["display"], root["system"]["esp_type"], root["system"]);
+                    parseDisplay(root.display, root.system.esp_type, root.system);
                     /*ENDIF_PLUGIN_DISPLAY*/
                     getAjax("/api/inverter/list", parseIv);
                 }

From d607bf104125294eb007a0563e02b2e4ded63614 Mon Sep 17 00:00:00 2001
From: lumapu <lp@lufami.de>
Date: Tue, 13 Aug 2024 23:58:23 +0200
Subject: [PATCH 2/8] fix partitions for 16MB variants update yml files for
 github actions

---
 .github/workflows/compile_development.yml |  2 +-
 .github/workflows/compile_release.yml     | 90 ++++++++++++++++++++---
 src/platformio.ini                        |  1 +
 3 files changed, 82 insertions(+), 11 deletions(-)

diff --git a/.github/workflows/compile_development.yml b/.github/workflows/compile_development.yml
index 9b3b68b3..cdd2cdf3 100644
--- a/.github/workflows/compile_development.yml
+++ b/.github/workflows/compile_development.yml
@@ -92,7 +92,7 @@ jobs:
       matrix:
         variant:
           - opendtufusion-de
-          - opendtufusion-16MB-de
+          #- opendtufusion-16MB-de #not needed, only the partions.bin is different and can be used from english build
           - esp8266-de
           - esp8266-all-de
           - esp8266-prometheus-de
diff --git a/.github/workflows/compile_release.yml b/.github/workflows/compile_release.yml
index 59adf28c..e31e1e55 100644
--- a/.github/workflows/compile_release.yml
+++ b/.github/workflows/compile_release.yml
@@ -7,34 +7,100 @@ on:
     - '**.md' # Do no build on *.md changes
 
 jobs:
-  build:
-    name: Build Environments
+  check:
+    name: Check Repository
     runs-on: ubuntu-latest
     if: github.repository == 'lumapu/ahoy' && github.ref_name == 'main'
     continue-on-error: false
+    steps:
+    - uses: actions/checkout@v4
+
+  build-en:
+    name: Build (EN)
+    needs: check
+    runs-on: ubuntu-latest
+    continue-on-error: false
     strategy:
       matrix:
         variant:
+          - opendtufusion
+          - opendtufusion-16MB
           - esp8266
+          - esp8266-all
+          - esp8266-minimal
           - esp8266-prometheus
           - esp8285
           - esp32-wroom32
+          - esp32-wroom32-minimal
           - esp32-wroom32-prometheus
-          - esp32-wroom32-ethernet
           - esp32-s2-mini
           - esp32-c3-mini
-          - opendtufusion
-          - opendtufusion-ethernet
+    steps:
+    - uses: actions/checkout@v4
+    - uses: benjlevesque/short-sha@v3.0
+      id: short-sha
+      with:
+        length: 7
+
+    - name: Cache Pip
+      uses: actions/cache@v4
+      with:
+        path: ~/.cache/pip
+        key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
+        restore-keys: |
+          ${{ runner.os }}-pip-
+
+    - name: Cache PlatformIO
+      uses: actions/cache@v4
+      with:
+        path: ~/.platformio
+        key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
+
+    - name: Setup Python
+      uses: actions/setup-python@v5
+      with:
+        python-version: "3.x"
+
+    - name: Install PlatformIO
+      run: |
+        python -m pip install setuptools --upgrade pip
+        pip install --upgrade platformio
+
+    - name: Run PlatformIO
+      run:  pio run -d src -e ${{ matrix.variant }}
+
+    - name: Compress .elf
+      uses: edgarrc/action-7z@v1
+      with:
+        args: 7z a -t7z -mx=9 src/.pio/build/${{ matrix.variant }}/firmware.elf.7z ./src/.pio/build/${{ matrix.variant }}/firmware.elf
+
+    - name: Rename Firmware
+      run: python scripts/getVersion.py ${{ matrix.variant }} >> $GITHUB_OUTPUT
+
+    - name: Create Artifact
+      uses: actions/upload-artifact@v4
+      with:
+        name: ${{ matrix.variant }}
+        path: firmware/*
+
+  build-de:
+    name: Build (DE)
+    needs: check
+    runs-on: ubuntu-latest
+    continue-on-error: false
+    strategy:
+      matrix:
+        variant:
+          - opendtufusion-de
+          #- opendtufusion-16MB-de #not needed, only the partions.bin is different and can be used from english build
           - esp8266-de
+          - esp8266-all-de
           - esp8266-prometheus-de
           - esp8285-de
           - esp32-wroom32-de
           - esp32-wroom32-prometheus-de
-          - esp32-wroom32-ethernet-de
           - esp32-s2-mini-de
           - esp32-c3-mini-de
-          - opendtufusion-de
-          - opendtufusion-ethernet-de
     steps:
     - uses: actions/checkout@v4
     - uses: benjlevesque/short-sha@v3.0
@@ -69,6 +135,11 @@ jobs:
     - name: Run PlatformIO
       run:  pio run -d src -e ${{ matrix.variant }}
 
+    - name: Compress .elf
+      uses: edgarrc/action-7z@v1
+      with:
+        args: 7z a -t7z -mx=9 src/.pio/build/${{ matrix.variant }}/firmware.elf.7z ./src/.pio/build/${{ matrix.variant }}/firmware.elf
+
     - name: Rename Firmware
       run: python scripts/getVersion.py ${{ matrix.variant }} >> $GITHUB_OUTPUT
 
@@ -78,11 +149,10 @@ jobs:
         name: ${{ matrix.variant }}
         path: firmware/*
 
-
   release:
     name: Create Release
+    needs: [build-en, build-de]
     runs-on: ubuntu-latest
-    needs: [build]
     continue-on-error: false
     permissions:
       contents: write
diff --git a/src/platformio.ini b/src/platformio.ini
index d539f89c..0639d16f 100644
--- a/src/platformio.ini
+++ b/src/platformio.ini
@@ -327,6 +327,7 @@ monitor_filters =
 platform = espressif32@6.7.0
 board = esp32-s3-devkitc-1
 board_upload.flash_size = 16MB
+board_build.partitions = default_16MB.csv
 upload_protocol = esp-builtin
 build_flags = ${env:opendtufusion.build_flags}
 monitor_filters =

From 8f12bfed8ea94c6ec8817adb99a8e3ecb21dee4a Mon Sep 17 00:00:00 2001
From: lumapu <lp@lufami.de>
Date: Wed, 14 Aug 2024 00:08:56 +0200
Subject: [PATCH 3/8] 0.8.137 * fix storage of timezone and region #1723

---
 src/CHANGES.md          |  3 +++
 src/defines.h           |  2 +-
 src/web/html/setup.html | 15 +++++++--------
 3 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/src/CHANGES.md b/src/CHANGES.md
index e8b984e2..140183e6 100644
--- a/src/CHANGES.md
+++ b/src/CHANGES.md
@@ -1,5 +1,8 @@
 # Development Changes
 
+## 0.8.137 - 2024-08-13
+* fix storage of timezone and region #1723
+
 ## 0.8.136 - 2024-08-12
 * fix save settings for ESP32 devices #1720
 
diff --git a/src/defines.h b/src/defines.h
index fd6675cd..33dc9624 100644
--- a/src/defines.h
+++ b/src/defines.h
@@ -13,7 +13,7 @@
 //-------------------------------------
 #define VERSION_MAJOR       0
 #define VERSION_MINOR       8
-#define VERSION_PATCH       136
+#define VERSION_PATCH       137
 //-------------------------------------
 typedef struct {
     uint8_t ch;
diff --git a/src/web/html/setup.html b/src/web/html/setup.html
index e7862489..2b59146c 100644
--- a/src/web/html/setup.html
+++ b/src/web/html/setup.html
@@ -700,14 +700,6 @@
                     el.push(mlCb("protMask" + i, a[i], chk))
                 }
                 d.append(...el);
-
-                var tz = []
-                for(i = 0; i < 24; i += 0.5)
-                    tz.push([i, ((i-12 > 0) ? "+" : "") + String(i-12)]);
-                document.getElementById("timezone").append(sel("timezone", tz, obj.timezone + 12))
-                var region = [[0, "Europe (860 - 870 MHz)"], [1, "USA, Indonesia (905 - 925 MHz)"], [2, "Brazil (915 - 928 MHz)"]]
-                document.getElementById("region").append(sel("region", region, obj.region))
-
             }
 
             function parseGeneric(obj) {
@@ -723,6 +715,13 @@
 
                 ts = obj.ts_now;
                 window.setInterval("tick()", 1000);
+
+                var tz = []
+                for(i = 0; i < 24; i += 0.5)
+                    tz.push([i, ((i-12 > 0) ? "+" : "") + String(i-12)]);
+                document.getElementById("timezone").append(sel("timezone", tz, obj.timezone + 12))
+                var region = [[0, "Europe (860 - 870 MHz)"], [1, "USA, Indonesia (905 - 925 MHz)"], [2, "Brazil (915 - 928 MHz)"]]
+                document.getElementById("region").append(sel("region", region, obj.region))
             }
 
             function parseStaticIp(obj) {

From 01285f0cb711491a287ed8dd1f3338ed2d8e186b Mon Sep 17 00:00:00 2001
From: Lukas Pusch <lp@lufami.de>
Date: Thu, 15 Aug 2024 14:53:52 +0200
Subject: [PATCH 4/8] 0.8.138 * fix ePaper not functional #1722

---
 src/CHANGES.md                |  3 +++
 src/defines.h                 |  2 +-
 src/network/AhoyEthernet.h    |  3 +++
 src/plugins/Display/Display.h | 10 +++++-----
 4 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/src/CHANGES.md b/src/CHANGES.md
index 140183e6..d32fa767 100644
--- a/src/CHANGES.md
+++ b/src/CHANGES.md
@@ -1,5 +1,8 @@
 # Development Changes
 
+## 0.8.138 - 2024-08-15
+* fix ePaper not functional #1722
+
 ## 0.8.137 - 2024-08-13
 * fix storage of timezone and region #1723
 
diff --git a/src/defines.h b/src/defines.h
index 33dc9624..ec5f07b0 100644
--- a/src/defines.h
+++ b/src/defines.h
@@ -13,7 +13,7 @@
 //-------------------------------------
 #define VERSION_MAJOR       0
 #define VERSION_MINOR       8
-#define VERSION_PATCH       137
+#define VERSION_PATCH       138
 //-------------------------------------
 typedef struct {
     uint8_t ch;
diff --git a/src/network/AhoyEthernet.h b/src/network/AhoyEthernet.h
index f6564e1f..9ed2de98 100644
--- a/src/network/AhoyEthernet.h
+++ b/src/network/AhoyEthernet.h
@@ -22,6 +22,9 @@ class AhoyEthernet : public AhoyWifi {
         };
 
     public:
+        AhoyEthernet()
+            : mMode (Mode::WIRELESS) {}
+
         virtual void begin() override {
             mMode = Mode::WIRELESS;
             mAp.enable();
diff --git a/src/plugins/Display/Display.h b/src/plugins/Display/Display.h
index 1694fec6..4654a4f4 100644
--- a/src/plugins/Display/Display.h
+++ b/src/plugins/Display/Display.h
@@ -45,7 +45,7 @@ class Display {
                 case DISP_TYPE_T4_SSD1306_128X32:   mMono = new DisplayMono128X32(); break; // SSD1306_128X32 (0.91")
                 case DISP_TYPE_T5_SSD1306_64X48:    mMono = new DisplayMono64X48();  break; // SSD1306_64X48 (0.66" - Wemos OLED Shield)
                 case DISP_TYPE_T6_SSD1309_128X64:   mMono = new DisplayMono128X64(); break; // SSD1309_128X64 (2.42")
-    #if defined(ESP32) && !defined(ETHERNET)
+    #if defined(ESP32)
                 case DISP_TYPE_T10_EPAPER:
                     mMono = NULL;   // ePaper does not use this
                     mRefreshCycle = 0;
@@ -73,7 +73,7 @@ class Display {
         }
 
         void loop() {
-            #if defined(ESP32) && !defined(ETHERNET)
+            #if defined(ESP32)
             if ((nullptr != mCfg) && (DISP_TYPE_T10_EPAPER == mCfg->type)) {
                 mEpaper.refreshLoop();
             }
@@ -96,7 +96,7 @@ class Display {
                     mLoopCnt = 0;
                 }
             }
-            #if defined(ESP32) && !defined(ETHERNET)
+            #if defined(ESP32)
             else if (DISP_TYPE_T10_EPAPER == mCfg->type) {
                 // maintain ePaper at least every 15 seconds
                 if (mNewPayload || (((++mLoopCnt) % 15) == 0)) {
@@ -193,7 +193,7 @@ class Display {
             if (mMono ) {
                 mMono->disp();
             }
-    #if defined(ESP32) && !defined(ETHERNET)
+    #if defined(ESP32)
             else if (DISP_TYPE_T10_EPAPER == mCfg->type) {
                 mEpaper.loop((totalPower), totalYieldDay, totalYieldTotal, nrprod);
                 mRefreshCycle++;
@@ -254,7 +254,7 @@ class Display {
         RADIO *mHmsRadio = nullptr;
         uint16_t mRefreshCycle = 0;
 
-    #if defined(ESP32) && !defined(ETHERNET)
+    #if defined(ESP32)
         DisplayEPaper mEpaper;
     #endif
         DisplayMono *mMono = nullptr;

From fe5dacd144fd82a98ff3f4fdbe0d0bbee6a0547f Mon Sep 17 00:00:00 2001
From: lumapu <lp@lufami.de>
Date: Thu, 15 Aug 2024 22:08:16 +0200
Subject: [PATCH 5/8] 0.8.139 * fix reload after save for WiFi configurations
 (5s -> 20s)

---
 src/CHANGES.md    |  3 +++
 src/defines.h     |  2 +-
 src/web/RestApi.h | 14 +++++++-------
 src/web/web.h     |  4 ++--
 4 files changed, 13 insertions(+), 10 deletions(-)

diff --git a/src/CHANGES.md b/src/CHANGES.md
index d32fa767..b222fcaf 100644
--- a/src/CHANGES.md
+++ b/src/CHANGES.md
@@ -1,5 +1,8 @@
 # Development Changes
 
+## 0.8.139 - 2024-08-15
+* fix reload after save for WiFi configurations (5s -> 20s)
+
 ## 0.8.138 - 2024-08-15
 * fix ePaper not functional #1722
 
diff --git a/src/defines.h b/src/defines.h
index ec5f07b0..7d6c82fc 100644
--- a/src/defines.h
+++ b/src/defines.h
@@ -13,7 +13,7 @@
 //-------------------------------------
 #define VERSION_MAJOR       0
 #define VERSION_MINOR       8
-#define VERSION_PATCH       138
+#define VERSION_PATCH       139
 //-------------------------------------
 typedef struct {
     uint8_t ch;
diff --git a/src/web/RestApi.h b/src/web/RestApi.h
index 9163839e..eac91cb9 100644
--- a/src/web/RestApi.h
+++ b/src/web/RestApi.h
@@ -457,8 +457,8 @@ class RestApi {
 
         void getHtmlReboot(AsyncWebServerRequest *request, JsonObject obj) {
             getGeneric(request, obj.createNestedObject(F("generic")));
-            #if defined(ETHERNET) && defined(CONFIG_IDF_TARGET_ESP32S3)
-            obj[F("refresh")] = 5;
+            #if defined(ETHERNET)
+            obj[F("refresh")] = (mConfig->sys.eth.enabled) ? 5 : 20;
             #else
             obj[F("refresh")] = 20;
             #endif
@@ -471,8 +471,8 @@ class RestApi {
             obj[F("pending")] = (bool)mApp->getSavePending();
             obj[F("success")] = (bool)mApp->getLastSaveSucceed();
             obj[F("reboot")] = (bool)mApp->getShouldReboot();
-            #if defined(ETHERNET) && defined(CONFIG_IDF_TARGET_ESP32S3)
-            obj[F("reload")] = 5;
+            #if defined(ETHERNET)
+            obj[F("reload")] = (mConfig->sys.eth.enabled) ? 5 : 20;
             #else
             obj[F("reload")] = 20;
             #endif
@@ -489,7 +489,7 @@ class RestApi {
             mApp->setRebootFlag();
             obj[F("html")] = F("Erase settings: success");
             #if defined(ETHERNET) && defined(CONFIG_IDF_TARGET_ESP32S3)
-            obj[F("reload")] = 5;
+            obj[F("reload")] = (mConfig->sys.eth.enabled) ? 5 : 20;
             #else
             obj[F("reload")] = 20;
             #endif
@@ -507,8 +507,8 @@ class RestApi {
             mApp->eraseSettings(true);
             mApp->setRebootFlag();
             obj[F("html")] = F("Factory reset: success");
-            #if defined(ETHERNET) && defined(CONFIG_IDF_TARGET_ESP32S3)
-            obj[F("reload")] = 5;
+            #if defined(ETHERNET)
+            obj[F("reload")] = (mConfig->sys.eth.enabled) ? 5 : 20;
             #else
             obj[F("reload")] = 20;
             #endif
diff --git a/src/web/web.h b/src/web/web.h
index 7ef1474d..b337228a 100644
--- a/src/web/web.h
+++ b/src/web/web.h
@@ -268,8 +268,8 @@ class Web {
             bool reboot = (!Update.hasError());
 
             String html = F("<!doctype html><html><head><title>Update</title><meta http-equiv=\"refresh\" content=\"");
-            #if defined(ETHERNET) && defined(CONFIG_IDF_TARGET_ESP32S3)
-                html += F("5");
+            #if defined(ETHERNET)
+                html += (mConfig->sys.eth.enabled) ? F("5") : F("20");
             #else
                 html += F("20");
             #endif

From 351f2b2c1c467c649a7731b9b8d550941d6f8d4b Mon Sep 17 00:00:00 2001
From: lumapu <lp@lufami.de>
Date: Fri, 16 Aug 2024 16:35:06 +0200
Subject: [PATCH 6/8] 0.8.140 release

---
 .../htmlPreprocessorDefines.cpython-311.pyc   |  Bin 2175 -> 2175 bytes
 src/CHANGES.md                                | 1567 +----------------
 src/defines.h                                 |    2 +-
 3 files changed, 50 insertions(+), 1519 deletions(-)

diff --git a/scripts/__pycache__/htmlPreprocessorDefines.cpython-311.pyc b/scripts/__pycache__/htmlPreprocessorDefines.cpython-311.pyc
index 6dca7de6a79130b4cda26f55fab17c7adff71d33..6681c7af5b728b0d91ca2136bb3f8915a17f59ad 100644
GIT binary patch
delta 20
acmew_@Lzy?IWI340}$8*@88H>!T|t3qy>8b

delta 20
acmew_@Lzy?IWI340}y<w<=Dtw!T|t62L+@6

diff --git a/src/CHANGES.md b/src/CHANGES.md
index b222fcaf..cede20cb 100644
--- a/src/CHANGES.md
+++ b/src/CHANGES.md
@@ -1,1523 +1,54 @@
-# Development Changes
+Changelog v0.8.140
 
-## 0.8.139 - 2024-08-15
-* fix reload after save for WiFi configurations (5s -> 20s)
-
-## 0.8.138 - 2024-08-15
-* fix ePaper not functional #1722
-
-## 0.8.137 - 2024-08-13
-* fix storage of timezone and region #1723
-
-## 0.8.136 - 2024-08-12
-* fix save settings for ESP32 devices #1720
-
-## 0.8.135 - 2024-08-11
-* translated `/system` #1717
-* added default pin seetings for opendtufusion board
-* fixed ethernet static IP
-* fixed ethernet MAC address read back
-
-## 0.8.134 - 2024-08-10
-* combined Ethernet and WiFi variants - Ethernet is now always included, but needs to be enabled if needed
-* improved statistic data in `/system`
-* redesigned `/system`
-
-## 0.8.133 - 2024-08-10
-* Ethernet variants now support WiFi as fall back / configuration
-
-## 0.8.132 - 2024-08-09
-* fix boot loop once no ePaper is connected #1713, #1714
-* improved refresh routine of ePeper
-* added default pin seetings for opendtufusion board
-
-## 0.8.131 - 2024-08-08
-* improved refresh routine of ePaper, full refresh each 12h #1107 #1706
-
-## 0.8.130 - 2024-08-04
-* fix message `ERR_DUPLICATE_INVERTER` #1705, #1700
-* merge PR: Power limit command accelerated #1704
-* merge PR: reduce update cycle of ePaper from 5 to 10 seconds #1706
-* merge PR: small fixes in different files #1711
-* add timestamp to JSON output #1707
-* restart Ahoy using MqTT #1667
-
-## 0.8.129 - 2024-07-11
-* sort alarms ascending #1471
-* fix alarm counter for first alarm
-* prevent add inverter multiple times #1700
-
-## 0.8.128 - 2024-07-10
-* add environments for 16MB flash size ESP32-S3 aka opendtufusion
-* prevent duplicate alarms, update end time once it is received #1471
-
-## 0.8.127 - 2024-06-21
-* add grid file #1677
-* merge PR: Bugfix Inv delete not working with password protection #1678
-
-## 0.8.126 - 2024-06-12
-* merge PR: Update pubMqtt.h - Bugfix #1673 #1674
-
-## 0.8.125 - 2024-06-09
-* fix ESP8266 compilation
-* merge PR: active_PowerLimit #1663
-
-## 0.8.124 - 2024-06-06
-* improved MqTT `OnMessage` (threadsafe)
-* support of HERF inverters, serial number is converted in Javascript #1425
-* revert buffer size in `RestAPI` for ESP8266 #1650
-
-## 0.8.123 - 2024-05-30
-* fix ESP8266, ESP32 static IP #1643 #1608
-* update MqTT library which enhances stability #1646
-* merge PR: MqTT JSON Payload pro Kanal und total, auswählbar #1541
-* add option to publish MqTT as json
-* publish rssi not on ch0 any more, published on `topic/rssi`
-* add total power to index page (if multiple inverters are configured)
-* show device name in html title #1639
-* update AsyncWebserver library to `3.2.2`
-* add environment name to filename of coredump
-
-## 0.8.122 - 2024-05-23
-* add button for donwloading coredump (ESP32 variants only)
-
-## 0.8.121 - 2024-05-20
-* fix ESP32 factory image generation
-* fix plot of history graph #1635
-
-## 0.8.120 - 2024-05-18
-* fix crash if invalid serial number was set -> inverter will be disabled automatically
-* improved and fixed factory image generation
-* fix HMT-1800-4T number of inputs #1628
-
-## 0.8.119 - 2024-05-17
-* fix reset values at midnight if WiFi isn't available #1620
-* fix typo in English versions
-* add yield day to history graph #1614
+* added HMS-400-1T support (serial number 1125...)
+* added further ESP8266 versions (-all, -minimal) because of small ressources on ESP8266
+* added some Gridprofiles
+* added support for characters in serial number of inverter (A-F)
+* added default coordinates on fresh install, needed for history graph on display and WebUI
+* added option to reset values on communication start (sunrise)
+* added max inverter temperature to WebUI
+* added yield day to history graph
 * added script and [instructions](../manual/factory_firmware.md) how to generate factory firmware which includes predefined settings
-* merge PR: Fix MI overnight behaviour #1626
-
-## 0.8.118 - 2024-05-10
-* possible fix reset max values #1609
-* slightly improved WiFi reconnect
-* update AsyncWebserver to `3.2.0`
-
-## 0.8.117 - 2024-05-09
-* fix reboot issue #1607 #1606
-* fix max temperature tooltip if only one inverter is configured #1605
-
-## 0.8.116 - 2024-05-05
-* calculation of max AC power
-* fix counter overflow communication queue
-* added max inverter temperature
-
-## 0.8.115 - 2024-05-03
-* fix inverter communication with manual time sync #1603
+* added button for downloading coredump (ESP32 variants only) to `/system`. Once a crash happens the reason can be checked afterwards (even after a reboot)
+* added support of HERF inverters, serial number is converted in Javascript
+* added device name to HTML title
+* added feature to restart Ahoy using MqTT
+* added feature to publish MqTT messages as JSON as well (new setting)
+* add timestamp to JSON output
+* improved communication to inverter
+* improved translation to German
+* improved HTML pages, reduced in size by only including relevant contents depending by chip type
+* improved history graph in WebUI
+* improved network routines
+* improved Wizard
+* improved WebUI by disabling upload and import buttons when no file is selected
 * improved queue, only add new object once they not exist in queue
-* added option to reset values on communication start (sunrise)
-* fixed calculation of max AC power (API, MqTT)
-
-## 0.8.114 - 2024-04-29
-* fix ESP8266 compile
-* fix history graph
-* fix close button color of modal windows in dark mode #1598
-* fix only one total field in `/live` #1579
-
-## 0.8.113 - 2024-04-25
-* code cleanup
-* fix ESP32-C3 compile
-
-## 0.8.112 - 2024-04-24
-* improved wizard
-* converted ePaper and Ethernet to hal-SPI
-* improved network connection
-
-## 0.8.111 - 2024-04-17
-* fix MqTT discovery field `ALARM_MES_ID` #1591
-* fix Wifi reconnect for ESP32 #1589 #1575
-* open link from `index.html` in new tab #1588 #1587
-* merge PR: Disable upload and import buttons when no file is selected #1586 #1519
-
-## 0.8.110 - 2024-04-11
-* revert CMT2300A changes #1553
-* merged PR: fix closing tag #1584
-* add disable retain flag #1582
-* fix German translation #1569
-* improved `Wizard`
-
-## 0.8.109 - 2024-04-09
-* fix hal patch
-
-## 0.8.108 - 2024-04-09
-* point to git SHA for `NRF24` library
-
-## 0.8.107 - 2024-04-08
-* fix boot loop on `reboot on midnight` feature #1542, #1599, #1566, #1571
-* fix German translation #1569
-* improved `Wizard`
-
-## 0.8.106 - 2024-04-05
-* fix bootloop with CMT and NRF on ESP32 #1566 #1562
-* possible fix of #1553
+* improved MqTT `OnMessage` (threadsafe)
+* improved read of alarms, prevent duplicates, update alarm time if there is an update
+* improved alarms are now sorted in ascending direction
+* improved by prevent add inverter multiple times
+* improved sending active power controll commands
+* improved refresh routine of ePaper, full refresh each 12h
+* redesigned WebUI on `/system`
+* changed MqTT retained flags
 * change MqTT return value of power limit acknowledge from `boolean` to `float`. The value returned is the same as it was set to confirm reception (not the read back value)
+* converted ePaper and Ethernet to hal-SPI
+* combined Ethernet and WiFi variants - Ethernet is now always included, but needs to be enabled if needed
+* changed: Ethernet variants (W5500) now support WiFi as fall back / configuration
+* switch AsyncWebserver library
+* fixed autodiscovery for homeassistant
+* fix reset values functionality
+* fix read back of active power control value, now it has one decimal place
+* fix NTP issues
+* fixed MqTT discovery field `ALARM_MES_ID`
+* fix close button color of modal windows in dark mode
+* fixed calculation of max AC power
+* fixed reset values at midnight if WiFi isn't available
+* fixed HMT-1800-4T number of inputs
+* fix crash if invalid serial number was set -> inverter will be disabled automatically
+* fixed ESP8266, ESP32 static IP
+* fixed ethernet MAC address read back
+* update several libraries to more recent versions
+* removed `yield efficiency` because the inverter already calculates correct
 
-## 0.8.105 - 2024-04-05
-* cleanup of `defines.h`
-* fix compile of esp32-minimal
-
-## 0.8.104 - 2024-04-04
-* fix reboot on inverter save (ESP32) #1559
-* fix NRF and Ethernet #1506
-
-## 0.8.103 - 2024-04-02
-* merge PR: fix: get refresh property from object #1552
-* merge PR: fix typos and spelling in Github Issue template #1550
-* merge PR: shorten last cmt waiting time #1549
-* fix cppcheck warnings
-* changed MqTT retained flags of some topics
-
-## 0.8.102 - 2024-04-01
-* fix NTP for `opendtufusion` #1542
-* fix scan WiFi in AP mode
-* fix MDNS #1538
-* improved Wizard
-* improved MqTT on devcontrol e.g. set power limit
-
-## 0.8.101 - 2024-03-28
-* updated converter scripts to include all enabled features again (redundant scan of build flags) #1534
-
-## 0.8.100 - 2024-03-27
-* fix captions in `/history #1532
-* fix get NTP time #1529 #1530
-* fix translation #1516
-
-## 0.8.99 - 2024-03-27
-* fix compilation of all environments
-
-## 0.8.98 - 2024-03-24
-* new network routines
-
-## 0.8.97 - 2024-03-22
-* add support for newest generation of inverters with A-F in their serial number
-* fix NTP and sunrise / sunset
-* set default coordinates to the mid of Germany #1516
-
-## 0.8.96 - 2024-03-21
-* fix precision of power limit in `/live` #1517
-* fix translation of `Werte ausgeben` in `settings` #1507
-* add grid profile #1518
-
-## 0.8.95 - 2024-03-17
-* fix NTP issues #1440 #1497 #1499
-
-## 0.8.94 - 2024-03-16
-* switched AsyncWebServer library
-* Ethernet version now uses same AsyncWebServer library as Wifi version
-* fix translation of `/history`
-* fix RSSI on `/history` #1463
-
-## 0.8.93 - 2024-03-14
-* improved history graph in WebUI #1491
-* merge PR: 1491
-
-## 0.8.92 - 2024-03-10
-* fix read back of limit value, now with one decimal place
-* added grid profile for Mexico #1493
-* added language to display on compile time #1484, #1255, #1479
-* added new environment `esp8266-all` which replace the original `esp8266`. The original now only have `MqTT` support but `Display` and `History` plugins are not included any more #1451
-
-## 0.8.91 - 2024-03-05
-* fix javascript issues #1480
-
-## 0.8.90 - 2024-03-05
-* added preprocessor defines to HTML (from platform.ini) to reduce the HTML in size if modules aren't enabled
-* auto build minimal English versions of ESP8266 and ESP32
-
-## 0.8.89 - 2024-03-02
-* merge PR: Collection of small fixes #1465
-* fix: show esp type on `/history` #1463
-* improved HMS-400-1T support (serial number 1125...) #1460
-
-## 0.8.88 - 2024-02-28
-* fix MqTT statistic data overflow #1458
-* add HMS-400-1T support (serial number 1125...) #1460
-* removed `yield efficiency` because the inverter already calculates correct #1243
-* merge PR: Remove hint to INV_RESET_MIDNIGHT resp. INV_PAUSE_DURING_NIGHT #1431
-
-## 0.8.87 - 2024-02-25
-* fix translations #1455 #1442
-
-## 0.8.86 - 2024-02-23
-* RestAPI check for parent element to be JsonObject #1449
-* fix translation #1448 #1442
-* fix reset values when inverter status is 'not available' #1035 #1437
-
-## 0.8.85 - 2024-02-22
-* possible fix of MqTT fix "total values are sent to often" #1421
-* fix translation #1442
-* availability check only related to live data #1035 #1437
-
-## 0.8.84 - 2024-02-19
-* fix homeassistant autodiscovery #1432
-* merge PR: more gracefull handling of complete retransmits #1433
-
-# RELEASE 0.8.83 - 2024-02-16
-
-## 0.8.82 - 2024-02-15
-* fixed crash once firmware version was read and sent via MqTT #1428
-* possible fix: reset yield offset on midnight #1429
-
-## 0.8.81 - 2024-02-13
-* fixed authentication with empty token #1415
-* added new setting for future function to send log via MqTT
-* combined firmware and hardware version to JSON topics (MqTT) #1212
-
-## 0.8.80 - 2024-02-12
-* optimize API authentication, Error-Codes #1415
-* breaking change: authentication API command changed #1415
-* breaking change: limit has to be send als `float`, `0.0 .. 100.0` #1415
-* updated documentation #1415
-* fix don't send control command twice #1426
-
-## 0.8.79 - 2024-02-11
-* fix `opendtufusion` build (started only once USB-console was connected)
-* code quality improvments
-
-## 0.8.78 - 2024-02-10
-* finalized API token access #1415
-* possible fix of MqTT fix "total values are sent to often" #1421
-* removed `switchCycle` from `hmsRadio.h` #1412
-* merge PR: Add hint to INV_RESET_MIDNIGHT resp. INV_PAUSE_DURING_NIGHT #1418
-* merge PR: simplify rxOffset logic #1417
-* code quality improvments
-
-## 0.8.77 - 2024-02-08
-* merge PR: BugFix: ACK #1414
-* fix suspicious if condition #1416
-* prepared API token for access, not functional #1415
-
-## 0.8.76 - 2024-02-07
-* revert changes from yesterday regarding snprintf and its size #1410, #1411
-* reduced cppcheck linter warnings significantly
-* try to improve ePaper (ghosting) #1107
-
-## 0.8.75 - 2024-02-06
-* fix active power control value #1406, #1409
-* update Mqtt lib to version `1.6.0`
-* take care of null terminator of chars #1410, #1411
-
-## 0.8.74 - 2024-02-05
-* reduced cppcheck linter warnings significantly
-
-## 0.8.73 - 2024-02-03
-* fix nullpointer during communication #1401
-* added `max_power` to MqTT total values #1375
-
-## 0.8.72 - 2024-02-03
-* fixed translation #1403
-* fixed sending commands to inverters which are soft turned off #1397
-* reduce switchChannel command for HMS (only each 5th cycle it will be send now)
-
-## 0.8.71 - 2024-02-03
-* fix heuristics reset
-* fix CMT missing frames problem
-* removed inverter gap setting
-* removed add to total (MqTT) inverter setting
-* fixed sending commands to inverters which are soft turned off
-* save settings before they are exported #1395
-* fix autologin bug if no password is set
-* translated `/serial`
-* removed "yield day" history
-
-## 0.8.70 - 2024-02-01
-* prevent sending commands to inverter which isn't active #1387
-* protect commands from popup in `/live` if password is set #1199
-
-## 0.8.69 - 2024-01-31
-* merge PR: Dynamic retries, pendular first rx chan #1394
-
-## 0.8.68 - 2024-01-29
-* fix HMS / HMT startup
-* added `flush_rx` to NRF on TX
-* start with heuristics set to `0`
-* added warning for WiFi channel 12-14 (ESP8266 only) #1381
-
-## 0.8.67 - 2024-01-29
-* fix HMS frequency
-* fix display of inverter id in serial log (was displayed twice)
-
-## 0.8.66 - 2024-01-28
-* added support for other regions - untested #1271
-* fix generation of DTU-ID; was computed twice without reset if two radios are enabled
-
-## 0.8.65 - 2024-01-24
-* removed patch for NRF `PLOS`
-* fix lang issues #1388
-* fix build on Windows of `opendtufusion` environments (git: trailing whitespaces)
-
-## 0.8.64 - 2024-01-22
-* add `ARC` to log (NRF24 Debug)
-* merge PR: ETH NTP update bugfix #1385
-
-## 0.8.63 - 2024-01-22
-* made code review
-* fixed endless loop #1387
-
-## 0.8.62 - 2024-01-21
-* updated version in footer #1381
-* repaired radio statistics #1382
-
-## 0.8.61 - 2024-01-21
-* add favicon to header
-* improved NRF communication
-* merge PR: provide localized times to display mono classes #1376
-* merge PR: Bypass OOM-Crash on minimal version & history access #1378
-* merge PR: Add some REST Api Endpoints to avail_endpoints #1380
-
-## 0.8.60 - 2024-01-20
-* merge PR: non blocking nRF loop #1371
-* merge PR: fixed millis in serial log #1373
-* merge PR: fix powergraph scale #1374
-* changed inverter gap to `1` as default (old settings will be overridden)
-
-## 0.8.59 - 2024-01-18
-* merge PR: solve display settings dependencies #1369
-* fix language typos #1346
-* full update of ePaper after booting #1107
-* fix MqTT yield day reset even if `pause inverter during nighttime` isn't active #1368
-
-## 0.8.58 - 2024-01-17
-* fix missing refresh URL #1366
-* fix view of grid profile #1365
-* fix webUI translation #1346
-* fix protection mask #1352
-* merge PR: Add Watchdog for ESP32 #1367
-* merge PR: ETH support for CMT2300A - HMS/HMT #1356
-* full refresh of ePaper after booting #1107
-* add optional custom link #1199
-* pinout has an own subgroup in `/settings`
-* grid profile will be displayed as hex in every case #1199
-
-## 0.8.57 - 2024-01-15
-* merge PR: fix immediate clearing of display after sunset #1364
-* merge PR: MI-MQTT and last retransmit #1363
-* fixed DTU-ID, now built from the unique part of the MAC
-* fix lang in `/system` #1346
-* added protection to prevent update to wrong firmware (environment check)
-
-## 0.8.56 - 2024-01-15
-* potential fix of update problems and random reboots #1359 #1354
-
-## 0.8.55 - 2024-01-14
-* merge PR: fix reboot problem with deactivated power graph #1360
-* changed scope of variables and member functions inside display classes
-* removed automatically "minimal" builds
-* fix include of "settings.h" (was already done in #1360)
-* merge PR: Enhancement: Add info about compiled modules to version string #1357
-* add info about installed binary to `/update` #1353
-* fix lang in `/system` #1346
-
-## 0.8.54 - 2024-01-13
-* added minimal version (without: MqTT, Display, History), WebUI is not changed!
-* added simulator (must be activated before compile, standard: off)
-* changed communication attempts back to 5
-
-## 0.8.53 - 2024-01-12
-* fix history graph
-* fix MqTT yield day #1331
-
-## 0.8.52 - 2024-01-11
-* possible fix of 'division by zero' #1345
-* fix lang #1348 #1346
-* fix timestamp `max AC power` #1324
-* fix stylesheet overlay `max AC power` #1324
-* fix download link #1340
-* fix history graph
-* try to fix #1331
-
-## 0.8.51 - 2024-01-10
-* fix translation #1346
-* further improve sending active power control command faster #1332
-* added history protection mask
-* merge PR: display graph improvements #1347
-
-## 0.8.50 - 2024-01-09
-* merge PR: added history charts to web #1336
-* merge PR: small display changes #1339
-* merge PR: MI - add "get loss logic" #1341
-* translated `/history`
-* fix translations in title of documents
-* added translations for error messages #1343
-
-## 0.8.49 - 2024-01-08
-* fix send total values if inverter state is different from `OFF` #1331
-* fix german language issues #1335
-
-## 0.8.48 - 2024-01-07
-* merge PR: pin selection for ESP-32 S2 #1334
-* merge PR: enhancement: power graph display option #1330
-
-## 0.8.47 - 2024-01-06
-* reduce GxEPD2 lib to compile faster
-* upgraded GxEPD2 lib to `1.5.3`
-* updated espressif32 platform to `6.5.0`
-* updated U8g2 to `2.35.9`
-* started to convert deprecated functions of new ArduinoJson `7.0.0`
-* started to have german translations of all variants (environments) #925 #1199
-* merge PR: add defines for retry attempts #1329
-
-## 0.8.46 - 2024-01-06
-* improved communication
-
-## 0.8.45 - 2024-01-05
-* fix MqTT total values #1326
-* start implementing a wizard for initial (WiFi) configuration #1199
-
-## 0.8.44 - 2024-01-05
-* fix MqTT transmission of data #1326
-* live data is read much earlier / faster and more often #1272
-
-## 0.8.43 - 2024-01-04
-* fix display of sunrise in `/system` #1308
-* fix overflow of `getLossRate` calculation #1318
-* improved MqTT by marking sent data and improved `last_success` resends #1319
-* added timestamp for `max ac power` as tooltip #1324 #1123 #1199
-* repaired Power-limit acknowledge #1322
-* fix `max_power` in `/visualization` was set to `0` after sunset
-
-## 0.8.42 - 2024-01-02
-* add LED to display whether it's night time or not. Can be reused as output to control battery system #1308
-* merge PR: beautifiying typography, added spaces between value and unit for `/visualization` #1314
-* merge PR: Prometheus add `getLossRate` and bugfixing #1315
-* add loss rate to `/visualization` in the statistics window
-* corrected `getLossRate` infos for MqTT and prometheus
-* added information about working IRQ for NRF24 and CMT2300A to `/system`
-
-## 0.8.41 - 2024-01-02
-* fix display timeout (OLED) to 60s
-* change offs to signed value
-
-## 0.8.40 - 2024-01-02
-* fix display of sunrise and sunset in `/system` #1308
-* fix MqTT set power limit #1313
-
-## 0.8.39 - 2024-01-01
-* fix MqTT dis_night_comm in the morning #1309 #1286
-* separated offset for sunrise and sunset #1308
-* powerlimit (active power control) now has one decimal place (MqTT / API) #1199
-* merge Prometheus metrics fix #1310
-* merge MI grid profile request #1306
-* merge update documentation / readme #1305
-* add `getLossRate` to radio statistics and to MqTT #1199
-
-## 0.8.38 - 2023-12-31
-* fix Grid-Profile JSON #1304
-
-## 0.8.37 - 2023-12-30
-* added grid profiles
-* format version of grid profile
-
-# RELEASE 0.8.36 - 2023-12-30
-
-## 0.8.35 - 2023-12-30
-* added dim option for LEDS
-* changed reload time for opendtufusion after update to 5s
-* fix default interval and gap for communication
-* fix serial number in exported json (was decimal, now correct as hexdecimal number)
-* beautified factory reset
-* added second stage for erase settings
-* increased maximal number of inverters to 32 for opendtufusion board (ESP32-S3)
-* fixed crash if CMT inverter is enabled, but CMT isn't configured
-
-# RELEASE 0.8.34 - 2023-12-29
-
-## 0.8.33 - 2023-12-29
-* improved communication thx @rejoe2
-
-## 0.8.32 - 2023-12-29
-* fix `start` / `stop` / `restart` commands #1287
-* added message, if profile was not read until now #1300
-* added developer option to use 'syslog-server' instead of 'web-serail' #1299
-
-## 0.8.31 - 2023-12-29
-* added class to handle timeouts PR #1298
-
-## 0.8.30 - 2023-12-28
-* added info if grid profile was not found
-* merge PR #1293
-* merge PR #1295 fix ESP8266 pin settings
-* merge PR #1297 fix layout for OLED displays
-
-## 0.8.29 - 2023-12-27
-* fix MqTT generic topic `comm_disabled` #1265 #1286
-* potential fix of #1285 (reset yield day)
-* fix fraction of yield correction #1280
-* fix crash if `getLossRate` was read from inverter #1288 #1290
-* reduce reload time for opendtufusion ethernet variant to 5 seconds
-* added basic grid parser
-* added ESP32-C3 mini environment #1289
-
-## 0.8.28 - 2023-12-23
-* fix bug heuristic
-* add version information to clipboard once 'copy' was clicked
-* add get loss rate @rejoe2
-* improve communication @rejoe2
-
-## 0.8.27 - 2023-12-18
-* fix set power limit #1276
-
-## 0.8.26 - 2023-12-17
-* read grid profile as HEX (`live` -> click inverter name -> `show grid profile`)
-
-## 0.8.25 - 2023-12-17
-* RX channel ID starts with fixed value #1277
-* fix static IP for Ethernet
-
-## 0.8.24 - 2023-12-16
-* fix NRF communication for opendtufusion ethernet variant
-
-## 0.8.23 - 2023-12-14
-* heuristics fix #1269 #1270
-* moved `sendInterval` in settings, **important:** *will be reseted to 15s after update to this version*
-* try to prevent access to radio classes if they are not activated
-* fixed millis in serial log
-* changed 'print whole trace' = `false` as default
-* added communication loop duration in [ms] to serial console
-* don't print Hex-Payload if 'print whole trace' == `false`
-
-## 0.8.22 - 2023-12-13
-* fix communication state-machine regarding zero export #1267
-
-## 0.8.21 - 2023-12-12
-* fix ethernet save inverter parameters #886
-* fix ethernet OTA update #886
-* improved radio statistics, fixed heuristic output for HMS and HMT inverters
-
-## 0.8.20 - 2023-12-12
-* improved HM communication #1259 #1249
-* fix `loadDefaults` for ethernet builds #1263
-* don't loop through radios which aren't in use #1264
-
-## 0.8.19 - 2023-12-11
-* added ms to serial log
-* added (debug) option to configure gap between inverter requests
-
-## 0.8.18 - 2023-12-10
-* copied even more from the original heuristic code #1259
-* added mDNS support #1262
-
-## 0.8.17 - 2023-12-10
-* possible fix of NRF with opendtufusion (without ETH)
-* small fix in heuristics (if conditions made assignment not comparisson)
-
-## 0.8.16 - 2023-12-09
-* fix crash if NRF is not enabled
-* updated heuristic #1080 #1259
-* fix compile opendtufusion fusion ethernet
-
-## 0.8.15 - 2023-12-09
-* added support for opendtufusion fusion ethernet shield #886
-* fixed range of HMS / HMT frequencies to 863 to 870 MHz #1238
-* changed `yield effiency` per default to `1.0` #1243
-* small heuristics improvements #1258
-* added class to combine inverter heuristics fields #1258
-
-## 0.8.14 - 2023-12-07
-* fixed decimal points for temperature (WebUI) PR #1254 #1251
-* fixed inverter statemachine available state PR #1252 #1253
-* fixed NTP update and sunrise calculation #1240 #886
-* display improvments #1248 #1247
-* fixed overflow in `hmRadio.h` #1244
-
-## 0.8.13 - 2023-11-28
-* merge PR #1239 symbolic layout for OLED 128x64 + motion senser functionality
-* fix MqTT IP addr for ETH connections PR #1240
-* added ethernet build for fusion board, not tested so far
-
-## 0.8.12 - 2023-11-20
-* added button `copy to clipboard` to `/serial`
-
-## 0.8.11 - 2023-11-20
-* improved communication, thx @rejoe2
-* improved heuristics, thx @rejoe2, @Oberfritze
-* added option to strip payload of frames to significant area
-
-## 0.8.10 - 2023-11-19
-* fix Mi and HM inverter communication #1235
-* added privacy mode option #1211
-* changed serial debug option to work without reboot
-
-## 0.8.9 - 2023-11-19
-* merged PR #1234
-* added new alarm codes
-* removed serial interval, was not in use anymore
-
-## 0.8.8 - 2023-11-16
-* fix ESP8266 save inverter #1232
-
-## 0.8.7 - 2023-11-13
-* fix ESP8266 inverter settings #1226
-* send radio statistics via MqTT #1227
-* made night communication inverter depended
-* added option to prevent adding values of inverter to total values (MqTT only) #1199
-
-## 0.8.6 - 2023-11-12
-* merged PR #1225
-* improved heuristics (prevent update of statitistic during testing)
-
-## 0.8.5 - 2023-11-12
-* fixed endless loop while switching CMT frequency
-* removed obsolete "retries" field from settings #1224
-* fixed crash while defining new invertes #1224
-* fixed default frequency settings
-* added default input power to `400` while adding new inverters
-* fixed color of wifi RSSI icon #1224
-
-## 0.8.4 - 2023-11-10
-* changed MqTT alarm topic, removed retained flag #1212
-* reduce last_success MQTT messages (#1124)
-* introduced tabs in WebGUI (inverter settings)
-* added inverter-wise power level and frequency
-
-## 0.8.3 - 2023-11-09
-* fix yield day reset during day #848
-* add total AC Max Power to WebUI
-* fix opendtufusion build (GxEPD patch)
-* fix null ptr PR #1222
-
-## 0.8.2 - 2023-11-08
-* beautified inverter settings in `setup` (preperation for future, settings become more inverter dependent)
-
-## 0.8.1 - 2023-11-05
-* added tx channel heuristics (per inverter)
-* fix statistics counter
-
-## 0.8.0 - 2023-10-??
-* switched to new communication scheme
-
-## 0.7.66 - 2023-10-04
-* prepared PA-Level for CMT
-* removed settings for number of retransmits, its fixed to `5` now
-* added parentheses to have a excactly defined behaviour
-
-## 0.7.65 - 2023-10-02
-* MI control command review #1197
-
-## 0.7.64 - 2023-10-02
-* moved active power control to modal in `live` view (per inverter) by click on current APC state
-
-## 0.7.63 - 2023-10-01
-* fix NRF24 communication #1200
-
-## 0.7.62 - 2023-10-01
-* fix communication to inverters #1198
-* add timeout before payload is tried to process (necessary for HMS/HMT)
-
-## 0.7.61 - 2023-10-01
-* merged `hmPayload` and `hmsPayload` into single class
-* merged generic radio functions into new parent class `radio.h`
-* moved radio statistics into the inverter - each inverter has now separate statistics which can be accessed by click on the footer in `/live`
-* fix compiler warnings #1191
-* fix ePaper logo during night time #1151
-
-## 0.7.60 - 2023-09-27
-* fixed typos in changelog #1172
-* fixed MqTT manual clientId storage #1174
-* fixed inverter name length in setup #1181
-* added inverter name to the header of alarm list #1181
-* improved code to avoid warning during compilation #1182
-* fix scheduler #1188, #1179
-
-## 0.7.59 - 2023-09-20
-* re-add another HM-400 hardware serial number accidentally removed with `0.7.45` (#1169)
-* merge PR #1170
-* reduce last_success MQTT messages (#1124)
-* add re-request if inverter is known to be online and first try fails
-* add alarm reporting to MI (might need review!)
-* rebuild MI limiting code closer to DTUSimMI example
-* round APC in `W` to an integer #1171
-
-## 0.7.58
-* fix ESP8266 save settings issue #1166
-
-## 0.7.57 - 2023-09-18
-* fix Alarms are always in queue (since 0.7.56)
-* fix display active power control to long for small devices #1165
-
-## 0.7.56 - 2023-09-17
-* only request alarms which were not received before #1113
-* added flag if alarm was requested but not received and re-request it #1105
-* merge PR #1163
-
-## 0.7.55 - 2023-09-17
-* fix prometheus builds
-* fix ESP32 default pinout #1159
-* added `opendtufusion-dev` because of annoying `-DARDUINO_USB_CDC_ON_BOOT=1` flag
-* fix display of current power on `index`
-* fix OTA, was damaged by version `0.7.51`, need to use webinstaller (from `0.7.51` to `0.7.54`)
-
-## 0.7.54 - 2023-09-16
-* added active power control in `W` to live view #201, #673
-* updated docu, active power control related #706
-* added current AC-Power to `index` page and removed version #763
-* improved statistic data, moved to entire struct
-* removed `/api/statistics` endpoint from REST-API
-
-## 0.7.53 - 2023-09-16
-* fix ePaper / display night behaviour #1151
-* fix ESP8266 compile error
-
-## 0.7.52 - 2023-09-16
-* fix CMT configurable pins #1150, #1159
-* update MqTT lib to version `1.4.5`
-
-## 0.7.51 - 2023-09-16
-* fix CMT configurable pins #1150
-* fix default CMT pins for opendtufusion
-* beautified `system`
-* changed main loops, fix resets #1125, #1135
-
-## 0.7.50 - 2023-09-12
-* moved MqTT info to `system`
-* added CMT info for ESP32 devices
-* improved CMT settings, now `SCLK` and `SDIO` are configurable #1046, #1150
-* changed `Power-Limit` in live-view to `Active Power Control`
-* increase length of update file selector #1132
-
-## 0.7.49 - 2023-09-11
-* merge PR: symbolic icons for mono displays, PR #1136
-* merge MI code restructuring PR #1145
-* merge Prometheus PR #1148
-* add option to strip webUI for ESP8266 (reduce code size, add ESP32 special features; `IF_ESP32` directives)
-* started to get CMT info into `system` - not finished
-
-## 0.7.48 - 2023-09-10
-* fix SSD1309 2.42" display pinout
-* improved setup page: save and delete of inverters
-
-## 0.7.47 - 2023-09-07
-* fix boot loop #1140
-* fix regex in `setup` page
-* fix MI serial number display `max-module-power` in `setup` #1142
-* renamed `opendtufusionv1` to `opendtufusion`
-
-## 0.7.46 - 2023-09-04
-* removed `delay` from ePaper
-* started improvements of `/system`
-* fix LEDs to check all configured inverters
-* send loop skip disabled inverters fix
-* print generated DTU SN to console
-* HW Versions for MI series PR #1133
-* 2.42" display (SSD1309) integration PR #1139
-* update user manual PR #1121
-* add / rename alarm codes PR #1118
-* revert default pin ESP32 for NRF23-CE #1132
-* luminance of display can be changed during runtime #1106
-
-## 0.7.45 - 2023-08-29
-* change ePaper text to symbols PR #1131
-* added some invertes to dev info list #1111
-
-## 0.7.44 - 2023-08-28
-* fix `last_success` transmitted to often #1124
-
-## 0.7.43 - 2023-08-28
-* improved RSSI for NRF24, now it's read per package (and inverter) #1129
-* arranged `heap` related info together in `/system`
-* fix display navi during save
-* clean up binary output, separated to folders
-
-## 0.7.42 - 2023-08-27
-* fix ePaper for opendtufusion_v2.x boards (Software SPI)
-* add signal strength for NRF24 - PR #1119
-* refactor wifi class to support ESP32 S2 PR #1127
-* update platform for ESP32 to 6.3.2
-* fix opendtufusion LED (were mixed)
-* fix `last_success` transmitted to often #1124
-* added ESP32-S3-mini to github actions
-* added old Changelog Entries, to have full log of changes
-
-## 0.7.41 - 2023-08-26
-* merge PR #1117 code spelling fixes #1112
-* alarms were not read after the first day
-
-## 0.7.40 - 2023-08-21
-* added default pins for opendtu-fusion-v1 board
-* fixed hw version display in `live`
-* removed development builds, renamed environments in `platform.ini`
-
-## 0.7.39 - 2023-08-21
-* fix background color of invalid inputs
-* add hardware info (click in `live` on inverter name)
-
-## 0.7.38 - 2023-08-21
-* reset alarms at midnight (if inverter is not available) #1105, #1096
-* add option to reset 'max' values on midnight #1102
-* added default pins for CMT2300A (matching OpenDTU)
-
-## 0.7.37 - 2023-08-18
-* fix alarm time on WebGui #1099
-* added RSSI info for HMS and HMT inverters (MqTT + REST API)
-
-# RELEASE 0.7.36 - 2023-08-18
-
-## 0.7.35 - 2023-08-17
-* fixed timestamp for alarms send over MqTT
-* auto-patch of `AsyncWebServer` #834, #1036
-* Update documentation in Git regarding `ESP8266` default NRF24 pin assignments
-
-## 0.7.34 - 2023-08-16
-* fixed timezone offset of alarms
-* added `AC` and `DC` to `/live` #1098
-* changed `ESP8266` default NRF24 pin assignments (`D3` = `CE` and `D4` = `IRQ`)
-* fixed background of modal window for bright color
-* fix MI crashes
-* fix some lost debug messages
-* merged PR #1095, MI fixes for 0.7.x versions
-* fix scheduled reboot #1097
-* added vector graphic logo `/doc/logo.svg`
-* merge PR #1093, improved Nokia5110 display layout
-
-## 0.7.33 - 2023-08-15
-* add alarms overview to WebGui #608
-* fix webGui total values #1084
-
-## 0.7.32 - 2023-08-14
-* fix colors of live view #1091
-
-## 0.7.31 - 2023-08-13
-* fixed docu #1085
-* changed active power limit MqTT messages to QOS2 #1072
-* improved alarm messages, added alarm-id to log #1089
-* trigger power limit read on next day (if inverter was offline meanwhile)
-* disabled improv implementation to check if it is related to 'Schwuppdizitaet'
-* changed live view to gray once inverter isn't available
-* added inverter status to API
-* changed sum of totals on WebGui depending on inverter status #1084
-* merge maximum power (AC and DC) from PR #1080
-
-## 0.7.30 - 2023-08-10
-* attempt to improve speed / response times (Schwuppdizitaet) #1075
-
-## 0.7.29 - 2023-08-09
-* MqTT alarm data was never sent, fixed
-* REST API: added alarm data
-* REST API: made get record obsolete
-* REST API: added power limit acknowledge `/api/inverter/id/[0-x]` #1072
-
-## 0.7.28 - 2023-08-08
-* fix MI inverter support #1078
-
-## 0.7.27 - 2023-08-08
-* added compile option for ethernet #886
-* fix ePaper configuration, missing `Busy`-Pin #1075
-
-# RELEASE 0.7.26 - 2023-08-06
-
-* fix MqTT `last_success`
-
-# RELEASE 0.7.25 - 2023-08-06
-
-## 0.7.24 - 2023-08-05
-* merge PR #1069 make MqTT client ID configurable
-* fix #1016, general MqTT status depending on inverter state machine
-* changed icon for fully available inverter to a filled check mark #1070
-* fixed `last_success` update with MqTT #1068
-* removed `improv` esp-web-installer script, because it is not fully functional at this time
-
-## 0.7.23 - 2023-08-04
-* merge PR #1056, visualization html
-* update MqTT library to 1.4.4
-* update RF24 library to 1.4.7
-* update ArduinoJson library to 6.21.3
-* set minimum invervall for `/live` to 5 seconds
-
-## 0.7.22 - 2023-08-04
-* attempt to fix homeassistant auto discovery #1066
-
-## 0.7.21 - 2023-07-30
-* fix MqTT YieldDay Total goes to 0 several times #1016
-
-## 0.7.20 - 2023-07-28
-* merge PR #1048 version and hash in API, fixes #1045
-* fix: no yield day update if yield day reads `0` after inverter reboot (mostly on evening) #848
-* try to fix Wifi override #1047
-* added information after NTP sync to WebUI #1040
-
-## 0.7.19 - 2023-07-27
-* next attempt to fix yield day for multiple inverters #1016
-* reduced threshold for inverter state machine from 60min to 15min to go from state `WAS_ON` to `OFF`
-
-## 0.7.18 - 2023-07-26
-* next attempt to fix yield day for multiple inverters #1016
-
-## 0.7.17 - 2023-07-25
-* next attempt to fix yield day for multiple inverters #1016
-* added two more states for the inverter status (also docu)
-
-## 0.7.16 - 2023-07-24
-* next attempt to fix yield day for multiple inverters #1016
-* fix export settings date #1040
-* fix time on WebUI (timezone was not observed) #913 #1016
-
-## 0.7.15 - 2023-07-23
-* add NTP sync interval #1019
-* adjusted range of contrast / luminance setting #1041
-* use only ISO time format in Web-UI #913
-
-## 0.7.14 - 2023-07-23
-* fix Contrast for Nokia Display #1041
-* attempt to fix #1016 by improving inverter status
-* added option to adjust efficiency for yield (day/total) #1028
-
-## 0.7.13 - 2023-07-19
-* merged display PR #1027
-* add date, time and version to export json #1024
-
-## 0.7.12 - 2023-07-09
-* added inverter status - state-machine #1016
-
-## 0.7.11 - 2023-07-09
-* fix MqTT endless loop #1013
-
-## 0.7.10 - 2023-07-08
-* fix MqTT endless loop #1013
-
-## 0.7.9 - 2023-07-08
-* added 'improve' functions to set wifi password directly with ESP web tools #1014
-* fixed MqTT publish while applying power limit #1013
-* slightly improved HMT live view (Voltage & Current)
-
-## 0.7.8 - 2023-07-05
-* fix `YieldDay`, `YieldTotal` and `P_AC` in `TotalValues` #929
-* fix some serial debug prints
-* merge PR #1005 which fixes issue #889
-* merge homeassistant PR #963
-* merge PR #890 which gives option for scheduled reboot at midnight (default off)
-
-## 0.7.7 - 2023-07-03
-* attempt to fix MqTT `YieldDay` in `TotalValues` #927
-* attempt to fix MqTT `YieldDay` and `YieldTotal` even if inverters are not completely available #929
-* fix wrong message 'NRF not connected' if it is disabled #1007
-
-## 0.7.6 - 2023-06-17
-* fix display of hidden SSID checkbox
-* changed yield correction data type to `double`, now decimal places are supported
-* corrected name of 0.91" display in settings
-* attempt to fix MqTT zero values only if setting is there #980, #957
-* made AP password configurable #951
-* added option to start without time-sync, eg. for AP-only-mode #951
-
-## 0.7.5 - 2023-06-16
-* fix yield day reset on midnight #957
-* improved tickers in `app.cpp`
-
-## 0.7.4 - 2023-06-15
-* fix MqTT `P_AC` send if inverters are available #987
-* fix assignments for HMS 1CH and 2CH devices
-* fixed uptime overflow #990
-
-## 0.7.3 - 2023-06-09
-* fix hidden SSID scan #983
-* improved NRF24 missing message on home screen #981
-* fix MqTT publishing only updated values #982
-
-## 0.7.2 - 2023-06-08
-* fix HMS-800 and HMS-1000 assignments #981
-* make nrf enabled all the time for ESP8266
-* fix menu item `active` highlight for 'API' and 'Doku'
-* fix MqTT totals issue #927, #980
-* reduce maximum number of inverters to 4 for ESP8266, increase to 16 for ESP32
-
-## 0.7.1 - 2023-06-05
-* enabled power limit control for HMS / HMT devices
-* changed NRF24 lib version back to 1.4.5 because of compile problems for EPS8266
-
-## 0.7.0 - 2023-06-04
-* HMS / HMT support for ESP32 devices
-
-## 0.6.15 - 2023-05-25
-* improved Prometheus Endpoint PR #958
-* fix turn off ePaper only if setting was set #956
-* improved reset values and update MqTT #957
-
-## 0.6.14 - 2023-05-21
-* merge PR #902 Mono-Display
-
-## 0.6.13 - 2023-05-16
-* merge PR #934 (fix JSON API) and #944 (update manual)
-
-## 0.6.12 - 2023-04-28
-* improved MqTT
-* fix menu active item
-
-## 0.6.11 - 2023-04-27
-* added MqTT class for publishing all values in Arduino `loop`
-
-## 0.6.10 - HMS
-* Version available in `HMS` branch
-
-# RELEASE 0.6.9 - 2023-04-19
-
-## 0.6.8 - 2023-04-19
-* fix #892 `zeroYieldDay` loop was not applied to all channels
-
-## 0.6.7 - 2023-04-13
-* merge PR #883, improved store of settings and javascript, thx @tastendruecker123
-* support `.` and `,` as floating point separator in setup #881
-
-## 0.6.6 - 2023-04-12
-* increased distance for `import` button in mobile view #879
-* changed `led_high_active` to `bool` #879
-
-## 0.6.5 - 2023-04-11
-* fix #845 MqTT subscription for `ctrl/power/[IV-ID]` was missing
-* merge PR #876, check JSON settings during read for existence
-* **NOTE:** incompatible change: renamed `led_high_active` to `act_high`, maybe setting must be changed after update
-* merge PR #861 do not send channel metric if channel is disabled
-
-## 0.6.4 - 2023-04-06
-* merge PR #846, improved NRF24 communication and MI, thx @beegee3 & @rejoe2
-* merge PR #859, fix burger menu height, thx @ThomasPohl
-
-## 0.6.3 - 2023-04-04
-* fix login, password length was not checked #852
-* merge PR #854 optimize browser caching, thx @tastendruecker123 #828
-* fix WiFi reconnect not working #851
-* updated issue templates #822
-
-## 0.6.2 - 2023-04-04
-* fix login from multiple clients #819
-* fix login screen on small displays
-
-## 0.6.1 - 2023-04-01
-* merge LED fix - LED1 shows MqTT state, LED configurable active high/low #839
-* only publish new inverter data #826
-* potential fix of WiFi hostname during boot up #752
-
-# RELEASE 0.6.0 - 2023-03-27
-
-## 0.5.110
-* MQTT fix reconnection by new lib version #780
-* add `about` page
-* improved documentation regarding SPI pins #814
-* improved documentation (getting started) #815 #816
-* improved MI 4-ch inverter #820
-
-## 0.5.109
-* reduced heap fragmentation by optimizing MqTT #768
-* ePaper: centered text thx @knickohr
-
-## 0.5.108
-* merge: PR SPI pins configurable (ESP32) #807, #806 (requires manual set of MISO=19, MOSI=23, SCLK=18 in GUI for existing installs)
-* merge: PR MI serial outputs #809
-* fix: no MQTT `total` sensor for autodiscover if only one inverter was found #805
-* fix: MQTT `total` renamed to `device_name` + `_TOTOL` for better visibility #805
-
-## 0.5.107
-* fix: show save message
-* fix: removed serial newline for `enqueueCmd`
-* Merged improved Prometheus #808
-
-## 0.5.106
-* merged MI and debug message changes #804
-* fixed MQTT autodiscover #794, #632
-
-## 0.5.105
-* merged MI, thx @rejoe2 #788
-* fixed reboot message #793
-
-## 0.5.104
-* further improved save settings
-* removed `#` character from ePaper
-* fixed saving pinout for `Nokia-Display`
-* removed `Reset` Pin for monochrome displays
-* improved wifi connection #652
-
-## 0.5.103
-* merged MI improvements, thx @rejoe2 #778
-* changed display inverter online message
-* merged heap improvements #772
-
-## 0.5.102
-* Warning: old exports are not compatible any more!
-* fix JSON import #775
-* fix save settings, at least already stored settings are not lost #771
-* further save settings improvements (only store inverters which are existing)
-* improved display of settings save return value
-* made save settings asynchronous (more heap memory is free)
-
-## 0.5.101
-* fix SSD1306
-* update documentation
-* Update miPayload.h
-* Update README.md
-* MI - remarks to user manual
-* MI - fix AC calc
-* MI - fix status msg. analysis
-
-## 0.5.100
-* fix add inverter `setup.html` #766
-* fix MQTT retained flag for total values #726
-* renamed buttons for import and export `setup.html`
-* added serial message `settings saved`
-
-## 0.5.99
-* fix limit in [User_Manual.md](../User_Manual.md)
-* changed `contrast` to `luminance` in `setup.html`
-* try to fix SSD1306 display #759
-* only show necessary display pins depending on setting
-
-## 0.5.98
-* fix SH1106 rotation and turn off during night #756
-* removed MQTT subscription `sync_ntp`, `set_time` with a value of `0` does the same #696
-* simplified MQTT subscription for `limit`. Check [User_Manual.md](../User_Manual.md) for new syntax #696, #713
-* repaired inverter wise limit control
-* fix upload settings #686
-
-## 0.5.97
-* Attention: re-ordered display types, check your settings! #746
-* improved saving settings of display #747, #746
-* disabled contrast for Nokia display #746
-* added Prometheus as compile option #719, #615
-* update MQTT lib to v1.4.1
-* limit decimal places to 2 in `live`
-* added `-DPIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48` to esp8266 debug build #657
-* a `max-module-power` of `0` disables channel in live view `setup`
-* merge MI improvements, get firmware information #753
-
-## 0.5.96
-* added Nokia display again for ESP8266 #764
-* changed `var` / `VAr` to SI unit `var` #732
-* fix MQTT retained flags for totals (P_AC, P_DC) #726, #721
-
-## 0.5.95
-* merged #742 MI Improvements
-* merged #736 remove obsolete JSON Endpoint
-
-## 0.5.94
-* added ePaper (for ESP32 only!), thx @dAjaY85 #735
-* improved `/live` margins #732
-* renamed `var` to `VAr` #732
-
-## 0.5.93
-* improved web API for `live`
-* added dark mode option
-* converted all forms to reponsive design
-* repaired menu with password protection #720, #716, #709
-* merged MI series fixes #729
-
-## 0.5.92
-* fix mobile menu
-* fix inverters in select `serial.html` #709
-
-## 0.5.91
-* improved html and navi, navi is visible even when API dies #660
-* reduced maximum allowed JSON size for API to 6000Bytes #660
-* small fix: output command at `prepareDevInformCmd` #692
-* improved inverter handling #671
-
-## 0.5.90
-* merged PR #684, #698, #705
-* webserial minor overflow fix #660
-* web `index.html` improve version information #701
-* fix MQTT sets power limit to zero (0) #692
-* changed `reset at midnight` with timezone #697
-
-## 0.5.89
-* reduced heap fragmentation (removed `strtok` completely) #644, #645, #682
-* added part of mac address to MQTT client ID to separate multiple ESPs in same network
-* added dictionary for MQTT to reduce heap-fragmentation
-* removed `last Alarm` from Live view, because it showed always the same alarm - will change in future
-
-## 0.5.88
-* MQTT Yield Day zero, next try to fix #671, thx @beegee3
-* added Solenso inverter to supported devices
-* improved reconnection of MQTT #650
-
-## 0.5.87
-* fix yield total correction as module (inverter input) value #570
-* reneabled instant start communication (once NTP is synced) #674
-
-## 0.5.86
-* prevent send devcontrol request during disabled night communication
-* changed yield total correction as module (inverter input) value #570
-* MQTT Yield Day zero, next try to fix #671
-
-## 0.5.85
-* fix power-limit was not checked for max retransmits #667
-* fix blue LED lights up all the time #672
-* fix installing schedulers if NTP server isn't available
-* improved zero values on triggers #671
-* hardcoded MQTT subtopics, because wildcard `#` leads to errors
-* rephrased some messages on webif, thx to @Argafal #638
-* fixed 'polling stop message' on `index.html` #639
-
-## 0.5.84
-* fix blue LED lights up all the time #672
-* added an instant start communication (once NTP is synced)
-* add MI 3rd generation inverters (10x2 serial numbers)
-* first decodings of messages from MI 2nd generation inverters
-
-## 0.5.83
-* fix MQTT publishing, `callback` was set but reset by following `setup()`
-
-## 0.5.82
-* fixed communication error #652
-* reset values is no bound to MQTT any more, setting moved to `inverter` #649
-* fixed wording on `index.hmtl` #661
-
-## 0.5.81
-* started implementation of MI inverters (setup.html, own processing `MiPayload.h`)
-
-## 0.5.80
-* fixed communication #656
-
-## 0.5.79
-* fixed mixed reset flags #648
-* fixed `mCbAlarm` if MQTT is not used #653
-* fixed MQTT `autodiscover` #630 thanks to @antibill51
-* next changes from @beegee many thanks for your contribution!
-* replaced `CircularBuffer` by `std::queue`
-* reworked `hmRadio.h` completely (interrupts, packaging)
-* fix exception while `reboot`
-* cleanup MQTT coding
-
-## 0.5.78
-* further improvements regarding wifi #611, fix connection if only one AP with same SSID is there
-* fix endless loop in `zerovalues` #564
-* fix auto discover again #565
-* added total values to autodiscover #630
-* improved zero at midnight #625
-
-## 0.5.77
-* fix wrong filename for automatically created manifest (online installer) #620
-* added rotate display feature #619
-* improved Prometheus endpoint #615, thx to @fsck-block
-* improved wifi to connect always to strongest RSSI, thx to @beegee3 #611
-
-## 0.5.76
-* reduce MQTT retry interval from maximum speed to one second
-* fixed homeassistant autodiscovery #565
-* implemented `getNTPTime` improvements #609 partially #611
-* added alarm messages to MQTT #177, #600, #608
-
-## 0.5.75
-* fix wakeup issue, once wifi was lost during night the communication didn't start in the morning
-* re-enabled FlashStringHelper because of lacking RAM
-* complete rewrite of monochrome display class, thx to @dAjaY85 -> displays are now configurable in setup
-* fix power limit not possible #607
-
-## 0.5.74
-* improved payload handling (retransmit all fragments on CRC error)
-* improved `isAvailable`, checks all record structs, inverter becomes available more early because version is check first
-* fix tickers were not set if NTP is not available
-* disabled annoying `FlashStringHelper` it gives randomly Exceptions during development, feels more stable since then
-* moved erase button to the bottom in settings, not nice but more functional
-* split `tx_count` to `tx_cnt` and `retransmits` in `system.html`
-* fix mqtt retransmit IP address #602
-* added debug infos for `scheduler` (web -> `/debug` as trigger prints list of tickers to serial console)
-
-## 0.5.73
-* improved payload handling (request / retransmit) #464
-* included alarm ID parse to serial console (in development)
-
-## 0.5.72
-* repaired system, scheduler was not called any more #596
-
-## 0.5.71
-* improved wifi handling and tickers, many thanks to @beegee3 #571
-* fixed YieldTotal correction calculation #589
-* fixed serial output of power limit acknowledge #569
-* reviewed `sendDiscoveryConfig` #565
-* merged PR `Monodisplay`, many thanks to @dAjaY85 #566, Note: (settings are introduced but not able to be modified, will be included in next version)
-
-## 0.5.70
-* corrected MQTT `comm_disabled` #529
-* fix Prometheus and JSON endpoints (`config_override.h`) #561
-* publish MQTT with fixed interval even if inverter is not available #542
-* added JSON settings upload. NOTE: settings JSON download changed, so only settings should be uploaded starting from version `0.5.70` #551
-* MQTT topic and inverter name have more allowed characters: `[A-Za-z0-9./#$%&=+_-]+`, thx: @Mo Demman
-* improved potential issue with `checkTicker`, thx @cbscpe
-* MQTT option for reset values on midnight / not avail / communication stop #539
-* small fix in `tickIVCommunication` #534
-* add `YieldTotal` correction, eg. to have the option to zero at year start #512
-
-## 0.5.69
-* merged SH1106 1.3" Display, thx @dAjaY85
-* added SH1106 to automatic build
-* added IP address to MQTT (version, device and IP are retained and only transmitted once after boot) #556
-* added `set_power_limit` acknowledge MQTT publish #553
-* changed: version, device name are only published via MQTT once after boot
-* added `Login` to menu if admin password is set #554
-* added `development` to second changelog link in `index.html` #543
-* added interval for MQTT (as option). With this settings MQTT live data is published in a fixed timing (only if inverter is available) #542, #523
-* added MQTT `comm_disabled` #529
-* changed name of binaries, moved GIT-Sha to the front #538
-
-## 0.5.68
-* repaired receive payload
-* Powerlimit is transferred immediately to inverter
-
-## 0.5.67
-* changed calculation of start / stop communication to 1 min after last comm. stop #515
-* moved payload send to `payload.h`, function `ivSend` #515
-* payload: if last frame is missing, request all frames again
-
-# RELEASE 0.5.66 - 2022-12-30
-
-## 0.5.65
-* wifi, code optimization #509
-
-## 0.5.64
-* channel name can use any character, not limited any more
-* added `/` to MQTT topic and Inverter name
-* trigger for `calcSunrise` is now using local time #515
-* fix reconnect timeout for WiFi #509
-* start AP only after boot, not on WiFi connection loss
-* improved /system `free_heap` value (measured before JSON-tree is built)
-
-## 0.5.63
-* fix Update button protection (prevent double click #527)
-* optimized scheduler #515 (thx @beegee3)
-* potential fix of #526 duplicates in API `/api/record/live`
-* added update information to `index.html`
-
-## 0.5.62
-* fix MQTT `status` update
-* removed MQTT `available_text` (can be deducted from `available`)
-* enhanced MQTT documentation in `User_Manual.md`
-* removed `tickSunset` and `tickSunrise` from MQTT. It's not needed any more because of minute wise check of status (`processIvStatus`)
-* changed MQTT topic `status` to nummeric value, check documentation in `User_Manual.md`
-* fix regular expression of `setup.html` for inverter name and channel name
-
-## 0.5.61
-* fix #521 no reconnect at beginning of day
-* added immediate (each minute) report of inverter status MQTT #522
-* added protection mask to select which pages should be protected
-* update of monochrome display, show values also if nothing changed
-
-## 0.5.60
-* added regex to inverter name and MQTT topic (setup.html)
-* beautified serial.html
-* added ticker for wifi loop #515
-
-## 0.5.59
-* fix night communication enable
-* improved different WiFi connection scenarios (STA WiFi not found, reconnect #509, redirect for AP to configuration)
-* increased MQTT user, pwd and topic length to 64 characters + `\0`. (The string end `\0` reduces the available size by one) #516
-
-## 0.5.58
-* improved stability
-* improved WiFi initial connection - especially if station WiFi is not available
-* removed new operators from web.h (reduce dynamic allocation)
-* improved sun calculation #515, #505
-* fixed WiFi auto reconnect #509
-* added disable night communication flag to MQTT #505
-* changed MQTT publish of `available` and `available_text` to sunset #468
-
-## 0.5.57
-* improved stability
-* added icons to index.html, added WiFi-strength symbol on each page
-* moved packet stats and sun to system.html
-* refactored communication offset (adjustable in minutes now)
-
-## 0.5.56
-* factory reset formats entire little fs
-* renamed sunrise / sunset on index.html to start / stop communication
-* show system information only if called directly from menu
-* beautified system.html
-
-## 0.5.55
-* fixed static IP save
-
-## 0.5.54
-* changed sunrise / sunset calculation, angle is now `-3.5` instead of original `-0.83`
-* improved scheduler (removed -1 from `reload`) #483
-* improved reboot flag in `app.h`
-* fixed #493 no MQTT payload once display is defined
-
-## 0.5.53
-* Mono-Display: show values in offline mode #498
-* improved WiFi class #483
-* added communication enable / disable (to test multiple DTUs with the same inverter)
-* fix factory reset #495
-
-## 0.5.52
-* improved ahoyWifi class
-* added interface class for app
-* refactored web and webApi -> RestApi
-* fix calcSunrise was not called every day
-* added MQTT RX counter to index.html
-* all values are displayed on /live even if they are 0
-* added MQTT <TOPIC>/status to show status over all inverters
-
-## 0.5.51
-* improved scheduler, @beegee3 #483
-* refactored get NTP time, @beegee3 #483
-* generate `bin.gz` only for 1M device ESP8285
-* fix calcSunrise was not called every day
-* increased number of allowed characters for MQTT user, broker and password, @DanielR92
-* added NRF24 info to Systeminfo, @DanielR92
-* added timezone for monochrome displays, @gh-fx2
-* added support for second inverter for monochrome displays, @gh-fx2
-
-## 0.5.50
-* fixed scheduler, uptime and timestamp counted too fast
-* added / renamed automatically build outputs
-* fixed MQTT ESP uptime on reconnect (not zero any more)
-* changed uptime on index.html to count each second, synced with ESP each 10 seconds
-
-## 0.5.49
-* fixed AP mode on brand new ESP modules
-* fixed `last_success` MQTT message
-* fixed MQTT inverter available status at sunset
-* reordered enqueue commands after boot up to prevent same payload length for successive commands
-* added automatic build for Nokia5110 and SSD1306 displays (ESP8266)
-
-## 0.5.48
-* added MQTT message send at sunset
-* added monochrome display support
-* added `once` and `onceAt` to scheduler to make code cleaner
-* improved sunrise / sunset calculation
-
-## 0.5.47
-* refactored ahoyWifi class: AP is opened on every boot, once station connection is successful the AP will be closed
-* improved NTP sync after boot, faster sync
-* fix NRF24 details only on valid SPI connection
-
-## 0.5.46
-* fix sunrise / sunset calculation
-* improved setup.html: `reboot on save` is checked as default
-
-## 0.5.45
-* changed MQTT last will topic from `status` to `mqtt`
-* fix sunrise / sunset calculation
-* fix time of serial web console
-
-## 0.5.44
-* marked some MQTT messages as retained
-* moved global functions to global location (no duplicates)
-* changed index.html interval to static 10 seconds
-* fix static IP
-* fix NTP with static IP
-* print MQTT info only if MQTT was configured
-
-## 0.5.43
-* updated REST API and MQTT (both of them use the same functionality)
-* added ESP-heap information as MQTT message
-* changed output name of automatic development build to fixed name (to have a static link from https://ahoydtu.de)
-* updated user manual to latest MQTT and API changes
-
-## 0.5.42
-* fix web logout (auto logout)
-* switched MQTT library
-
-# RELEASE 0.5.41 - 2022-11-22
-
-# RELEASE 0.5.28 - 2022-10-30
-
-# RELEASE 0.5.17 - 2022-09-06
-
-# RELEASE 0.5.16 - 2022-09-04
-
+full version log: [Development Log](https://github.com/lumapu/ahoy/blob/development03/src/CHANGES.md)
diff --git a/src/defines.h b/src/defines.h
index 7d6c82fc..94674315 100644
--- a/src/defines.h
+++ b/src/defines.h
@@ -13,7 +13,7 @@
 //-------------------------------------
 #define VERSION_MAJOR       0
 #define VERSION_MINOR       8
-#define VERSION_PATCH       139
+#define VERSION_PATCH       140
 //-------------------------------------
 typedef struct {
     uint8_t ch;

From f1f448169322e5535e32962b2dcbba733a426741 Mon Sep 17 00:00:00 2001
From: lumapu <lp@lufami.de>
Date: Fri, 16 Aug 2024 16:36:29 +0200
Subject: [PATCH 7/8] 0.8.140 release * fix workflow

---
 .github/workflows/compile_release.yml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/.github/workflows/compile_release.yml b/.github/workflows/compile_release.yml
index e31e1e55..6ea3dcf2 100644
--- a/.github/workflows/compile_release.yml
+++ b/.github/workflows/compile_release.yml
@@ -210,7 +210,7 @@ jobs:
 
   deploy:
     name: Deploy Environments to fw.ahoydtu.de
-    needs: [build, release]
+    needs: [build-en, build-de, release]
     runs-on: ubuntu-latest
     continue-on-error: false
     steps:

From 9c895f9277830d73a24037561ed9b507791c1bef Mon Sep 17 00:00:00 2001
From: lumapu <lp@lufami.de>
Date: Fri, 16 Aug 2024 22:12:03 +0200
Subject: [PATCH 8/8] 0.8.140 * released version

---
 src/CHANGES.md | 1569 ++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 1520 insertions(+), 49 deletions(-)

diff --git a/src/CHANGES.md b/src/CHANGES.md
index cede20cb..a48295d1 100644
--- a/src/CHANGES.md
+++ b/src/CHANGES.md
@@ -1,54 +1,1525 @@
-Changelog v0.8.140
+# Development Changes
 
-* added HMS-400-1T support (serial number 1125...)
-* added further ESP8266 versions (-all, -minimal) because of small ressources on ESP8266
-* added some Gridprofiles
-* added support for characters in serial number of inverter (A-F)
-* added default coordinates on fresh install, needed for history graph on display and WebUI
-* added option to reset values on communication start (sunrise)
-* added max inverter temperature to WebUI
-* added yield day to history graph
+# RELEASE 0.8.140 - 2024-08-16
+
+## 0.8.139 - 2024-08-15
+* fix reload after save for WiFi configurations (5s -> 20s)
+
+## 0.8.138 - 2024-08-15
+* fix ePaper not functional #1722
+
+## 0.8.137 - 2024-08-13
+* fix storage of timezone and region #1723
+
+## 0.8.136 - 2024-08-12
+* fix save settings for ESP32 devices #1720
+
+## 0.8.135 - 2024-08-11
+* translated `/system` #1717
+* added default pin seetings for opendtufusion board
+* fixed ethernet static IP
+* fixed ethernet MAC address read back
+
+## 0.8.134 - 2024-08-10
+* combined Ethernet and WiFi variants - Ethernet is now always included, but needs to be enabled if needed
+* improved statistic data in `/system`
+* redesigned `/system`
+
+## 0.8.133 - 2024-08-10
+* Ethernet variants now support WiFi as fall back / configuration
+
+## 0.8.132 - 2024-08-09
+* fix boot loop once no ePaper is connected #1713, #1714
+* improved refresh routine of ePeper
+* added default pin seetings for opendtufusion board
+
+## 0.8.131 - 2024-08-08
+* improved refresh routine of ePaper, full refresh each 12h #1107 #1706
+
+## 0.8.130 - 2024-08-04
+* fix message `ERR_DUPLICATE_INVERTER` #1705, #1700
+* merge PR: Power limit command accelerated #1704
+* merge PR: reduce update cycle of ePaper from 5 to 10 seconds #1706
+* merge PR: small fixes in different files #1711
+* add timestamp to JSON output #1707
+* restart Ahoy using MqTT #1667
+
+## 0.8.129 - 2024-07-11
+* sort alarms ascending #1471
+* fix alarm counter for first alarm
+* prevent add inverter multiple times #1700
+
+## 0.8.128 - 2024-07-10
+* add environments for 16MB flash size ESP32-S3 aka opendtufusion
+* prevent duplicate alarms, update end time once it is received #1471
+
+## 0.8.127 - 2024-06-21
+* add grid file #1677
+* merge PR: Bugfix Inv delete not working with password protection #1678
+
+## 0.8.126 - 2024-06-12
+* merge PR: Update pubMqtt.h - Bugfix #1673 #1674
+
+## 0.8.125 - 2024-06-09
+* fix ESP8266 compilation
+* merge PR: active_PowerLimit #1663
+
+## 0.8.124 - 2024-06-06
+* improved MqTT `OnMessage` (threadsafe)
+* support of HERF inverters, serial number is converted in Javascript #1425
+* revert buffer size in `RestAPI` for ESP8266 #1650
+
+## 0.8.123 - 2024-05-30
+* fix ESP8266, ESP32 static IP #1643 #1608
+* update MqTT library which enhances stability #1646
+* merge PR: MqTT JSON Payload pro Kanal und total, auswählbar #1541
+* add option to publish MqTT as json
+* publish rssi not on ch0 any more, published on `topic/rssi`
+* add total power to index page (if multiple inverters are configured)
+* show device name in html title #1639
+* update AsyncWebserver library to `3.2.2`
+* add environment name to filename of coredump
+
+## 0.8.122 - 2024-05-23
+* add button for donwloading coredump (ESP32 variants only)
+
+## 0.8.121 - 2024-05-20
+* fix ESP32 factory image generation
+* fix plot of history graph #1635
+
+## 0.8.120 - 2024-05-18
+* fix crash if invalid serial number was set -> inverter will be disabled automatically
+* improved and fixed factory image generation
+* fix HMT-1800-4T number of inputs #1628
+
+## 0.8.119 - 2024-05-17
+* fix reset values at midnight if WiFi isn't available #1620
+* fix typo in English versions
+* add yield day to history graph #1614
 * added script and [instructions](../manual/factory_firmware.md) how to generate factory firmware which includes predefined settings
-* added button for downloading coredump (ESP32 variants only) to `/system`. Once a crash happens the reason can be checked afterwards (even after a reboot)
-* added support of HERF inverters, serial number is converted in Javascript
-* added device name to HTML title
-* added feature to restart Ahoy using MqTT
-* added feature to publish MqTT messages as JSON as well (new setting)
-* add timestamp to JSON output
-* improved communication to inverter
-* improved translation to German
-* improved HTML pages, reduced in size by only including relevant contents depending by chip type
-* improved history graph in WebUI
-* improved network routines
-* improved Wizard
-* improved WebUI by disabling upload and import buttons when no file is selected
+* merge PR: Fix MI overnight behaviour #1626
+
+## 0.8.118 - 2024-05-10
+* possible fix reset max values #1609
+* slightly improved WiFi reconnect
+* update AsyncWebserver to `3.2.0`
+
+## 0.8.117 - 2024-05-09
+* fix reboot issue #1607 #1606
+* fix max temperature tooltip if only one inverter is configured #1605
+
+## 0.8.116 - 2024-05-05
+* calculation of max AC power
+* fix counter overflow communication queue
+* added max inverter temperature
+
+## 0.8.115 - 2024-05-03
+* fix inverter communication with manual time sync #1603
 * improved queue, only add new object once they not exist in queue
-* improved MqTT `OnMessage` (threadsafe)
-* improved read of alarms, prevent duplicates, update alarm time if there is an update
-* improved alarms are now sorted in ascending direction
-* improved by prevent add inverter multiple times
-* improved sending active power controll commands
-* improved refresh routine of ePaper, full refresh each 12h
-* redesigned WebUI on `/system`
-* changed MqTT retained flags
-* change MqTT return value of power limit acknowledge from `boolean` to `float`. The value returned is the same as it was set to confirm reception (not the read back value)
+* added option to reset values on communication start (sunrise)
+* fixed calculation of max AC power (API, MqTT)
+
+## 0.8.114 - 2024-04-29
+* fix ESP8266 compile
+* fix history graph
+* fix close button color of modal windows in dark mode #1598
+* fix only one total field in `/live` #1579
+
+## 0.8.113 - 2024-04-25
+* code cleanup
+* fix ESP32-C3 compile
+
+## 0.8.112 - 2024-04-24
+* improved wizard
 * converted ePaper and Ethernet to hal-SPI
-* combined Ethernet and WiFi variants - Ethernet is now always included, but needs to be enabled if needed
-* changed: Ethernet variants (W5500) now support WiFi as fall back / configuration
-* switch AsyncWebserver library
-* fixed autodiscovery for homeassistant
-* fix reset values functionality
-* fix read back of active power control value, now it has one decimal place
-* fix NTP issues
-* fixed MqTT discovery field `ALARM_MES_ID`
-* fix close button color of modal windows in dark mode
-* fixed calculation of max AC power
-* fixed reset values at midnight if WiFi isn't available
-* fixed HMT-1800-4T number of inputs
-* fix crash if invalid serial number was set -> inverter will be disabled automatically
-* fixed ESP8266, ESP32 static IP
-* fixed ethernet MAC address read back
-* update several libraries to more recent versions
-* removed `yield efficiency` because the inverter already calculates correct
+* improved network connection
+
+## 0.8.111 - 2024-04-17
+* fix MqTT discovery field `ALARM_MES_ID` #1591
+* fix Wifi reconnect for ESP32 #1589 #1575
+* open link from `index.html` in new tab #1588 #1587
+* merge PR: Disable upload and import buttons when no file is selected #1586 #1519
+
+## 0.8.110 - 2024-04-11
+* revert CMT2300A changes #1553
+* merged PR: fix closing tag #1584
+* add disable retain flag #1582
+* fix German translation #1569
+* improved `Wizard`
+
+## 0.8.109 - 2024-04-09
+* fix hal patch
+
+## 0.8.108 - 2024-04-09
+* point to git SHA for `NRF24` library
+
+## 0.8.107 - 2024-04-08
+* fix boot loop on `reboot on midnight` feature #1542, #1599, #1566, #1571
+* fix German translation #1569
+* improved `Wizard`
+
+## 0.8.106 - 2024-04-05
+* fix bootloop with CMT and NRF on ESP32 #1566 #1562
+* possible fix of #1553
+* change MqTT return value of power limit acknowledge from `boolean` to `float`. The value returned is the same as it was set to confirm reception (not the read back value)
+
+## 0.8.105 - 2024-04-05
+* cleanup of `defines.h`
+* fix compile of esp32-minimal
+
+## 0.8.104 - 2024-04-04
+* fix reboot on inverter save (ESP32) #1559
+* fix NRF and Ethernet #1506
+
+## 0.8.103 - 2024-04-02
+* merge PR: fix: get refresh property from object #1552
+* merge PR: fix typos and spelling in Github Issue template #1550
+* merge PR: shorten last cmt waiting time #1549
+* fix cppcheck warnings
+* changed MqTT retained flags of some topics
+
+## 0.8.102 - 2024-04-01
+* fix NTP for `opendtufusion` #1542
+* fix scan WiFi in AP mode
+* fix MDNS #1538
+* improved Wizard
+* improved MqTT on devcontrol e.g. set power limit
+
+## 0.8.101 - 2024-03-28
+* updated converter scripts to include all enabled features again (redundant scan of build flags) #1534
+
+## 0.8.100 - 2024-03-27
+* fix captions in `/history #1532
+* fix get NTP time #1529 #1530
+* fix translation #1516
+
+## 0.8.99 - 2024-03-27
+* fix compilation of all environments
+
+## 0.8.98 - 2024-03-24
+* new network routines
+
+## 0.8.97 - 2024-03-22
+* add support for newest generation of inverters with A-F in their serial number
+* fix NTP and sunrise / sunset
+* set default coordinates to the mid of Germany #1516
+
+## 0.8.96 - 2024-03-21
+* fix precision of power limit in `/live` #1517
+* fix translation of `Werte ausgeben` in `settings` #1507
+* add grid profile #1518
+
+## 0.8.95 - 2024-03-17
+* fix NTP issues #1440 #1497 #1499
+
+## 0.8.94 - 2024-03-16
+* switched AsyncWebServer library
+* Ethernet version now uses same AsyncWebServer library as Wifi version
+* fix translation of `/history`
+* fix RSSI on `/history` #1463
+
+## 0.8.93 - 2024-03-14
+* improved history graph in WebUI #1491
+* merge PR: 1491
+
+## 0.8.92 - 2024-03-10
+* fix read back of limit value, now with one decimal place
+* added grid profile for Mexico #1493
+* added language to display on compile time #1484, #1255, #1479
+* added new environment `esp8266-all` which replace the original `esp8266`. The original now only have `MqTT` support but `Display` and `History` plugins are not included any more #1451
+
+## 0.8.91 - 2024-03-05
+* fix javascript issues #1480
+
+## 0.8.90 - 2024-03-05
+* added preprocessor defines to HTML (from platform.ini) to reduce the HTML in size if modules aren't enabled
+* auto build minimal English versions of ESP8266 and ESP32
+
+## 0.8.89 - 2024-03-02
+* merge PR: Collection of small fixes #1465
+* fix: show esp type on `/history` #1463
+* improved HMS-400-1T support (serial number 1125...) #1460
+
+## 0.8.88 - 2024-02-28
+* fix MqTT statistic data overflow #1458
+* add HMS-400-1T support (serial number 1125...) #1460
+* removed `yield efficiency` because the inverter already calculates correct #1243
+* merge PR: Remove hint to INV_RESET_MIDNIGHT resp. INV_PAUSE_DURING_NIGHT #1431
+
+## 0.8.87 - 2024-02-25
+* fix translations #1455 #1442
+
+## 0.8.86 - 2024-02-23
+* RestAPI check for parent element to be JsonObject #1449
+* fix translation #1448 #1442
+* fix reset values when inverter status is 'not available' #1035 #1437
+
+## 0.8.85 - 2024-02-22
+* possible fix of MqTT fix "total values are sent to often" #1421
+* fix translation #1442
+* availability check only related to live data #1035 #1437
+
+## 0.8.84 - 2024-02-19
+* fix homeassistant autodiscovery #1432
+* merge PR: more gracefull handling of complete retransmits #1433
+
+# RELEASE 0.8.83 - 2024-02-16
+
+## 0.8.82 - 2024-02-15
+* fixed crash once firmware version was read and sent via MqTT #1428
+* possible fix: reset yield offset on midnight #1429
+
+## 0.8.81 - 2024-02-13
+* fixed authentication with empty token #1415
+* added new setting for future function to send log via MqTT
+* combined firmware and hardware version to JSON topics (MqTT) #1212
+
+## 0.8.80 - 2024-02-12
+* optimize API authentication, Error-Codes #1415
+* breaking change: authentication API command changed #1415
+* breaking change: limit has to be send als `float`, `0.0 .. 100.0` #1415
+* updated documentation #1415
+* fix don't send control command twice #1426
+
+## 0.8.79 - 2024-02-11
+* fix `opendtufusion` build (started only once USB-console was connected)
+* code quality improvments
+
+## 0.8.78 - 2024-02-10
+* finalized API token access #1415
+* possible fix of MqTT fix "total values are sent to often" #1421
+* removed `switchCycle` from `hmsRadio.h` #1412
+* merge PR: Add hint to INV_RESET_MIDNIGHT resp. INV_PAUSE_DURING_NIGHT #1418
+* merge PR: simplify rxOffset logic #1417
+* code quality improvments
+
+## 0.8.77 - 2024-02-08
+* merge PR: BugFix: ACK #1414
+* fix suspicious if condition #1416
+* prepared API token for access, not functional #1415
+
+## 0.8.76 - 2024-02-07
+* revert changes from yesterday regarding snprintf and its size #1410, #1411
+* reduced cppcheck linter warnings significantly
+* try to improve ePaper (ghosting) #1107
+
+## 0.8.75 - 2024-02-06
+* fix active power control value #1406, #1409
+* update Mqtt lib to version `1.6.0`
+* take care of null terminator of chars #1410, #1411
+
+## 0.8.74 - 2024-02-05
+* reduced cppcheck linter warnings significantly
+
+## 0.8.73 - 2024-02-03
+* fix nullpointer during communication #1401
+* added `max_power` to MqTT total values #1375
+
+## 0.8.72 - 2024-02-03
+* fixed translation #1403
+* fixed sending commands to inverters which are soft turned off #1397
+* reduce switchChannel command for HMS (only each 5th cycle it will be send now)
+
+## 0.8.71 - 2024-02-03
+* fix heuristics reset
+* fix CMT missing frames problem
+* removed inverter gap setting
+* removed add to total (MqTT) inverter setting
+* fixed sending commands to inverters which are soft turned off
+* save settings before they are exported #1395
+* fix autologin bug if no password is set
+* translated `/serial`
+* removed "yield day" history
+
+## 0.8.70 - 2024-02-01
+* prevent sending commands to inverter which isn't active #1387
+* protect commands from popup in `/live` if password is set #1199
+
+## 0.8.69 - 2024-01-31
+* merge PR: Dynamic retries, pendular first rx chan #1394
+
+## 0.8.68 - 2024-01-29
+* fix HMS / HMT startup
+* added `flush_rx` to NRF on TX
+* start with heuristics set to `0`
+* added warning for WiFi channel 12-14 (ESP8266 only) #1381
+
+## 0.8.67 - 2024-01-29
+* fix HMS frequency
+* fix display of inverter id in serial log (was displayed twice)
+
+## 0.8.66 - 2024-01-28
+* added support for other regions - untested #1271
+* fix generation of DTU-ID; was computed twice without reset if two radios are enabled
+
+## 0.8.65 - 2024-01-24
+* removed patch for NRF `PLOS`
+* fix lang issues #1388
+* fix build on Windows of `opendtufusion` environments (git: trailing whitespaces)
+
+## 0.8.64 - 2024-01-22
+* add `ARC` to log (NRF24 Debug)
+* merge PR: ETH NTP update bugfix #1385
+
+## 0.8.63 - 2024-01-22
+* made code review
+* fixed endless loop #1387
+
+## 0.8.62 - 2024-01-21
+* updated version in footer #1381
+* repaired radio statistics #1382
+
+## 0.8.61 - 2024-01-21
+* add favicon to header
+* improved NRF communication
+* merge PR: provide localized times to display mono classes #1376
+* merge PR: Bypass OOM-Crash on minimal version & history access #1378
+* merge PR: Add some REST Api Endpoints to avail_endpoints #1380
+
+## 0.8.60 - 2024-01-20
+* merge PR: non blocking nRF loop #1371
+* merge PR: fixed millis in serial log #1373
+* merge PR: fix powergraph scale #1374
+* changed inverter gap to `1` as default (old settings will be overridden)
+
+## 0.8.59 - 2024-01-18
+* merge PR: solve display settings dependencies #1369
+* fix language typos #1346
+* full update of ePaper after booting #1107
+* fix MqTT yield day reset even if `pause inverter during nighttime` isn't active #1368
+
+## 0.8.58 - 2024-01-17
+* fix missing refresh URL #1366
+* fix view of grid profile #1365
+* fix webUI translation #1346
+* fix protection mask #1352
+* merge PR: Add Watchdog for ESP32 #1367
+* merge PR: ETH support for CMT2300A - HMS/HMT #1356
+* full refresh of ePaper after booting #1107
+* add optional custom link #1199
+* pinout has an own subgroup in `/settings`
+* grid profile will be displayed as hex in every case #1199
+
+## 0.8.57 - 2024-01-15
+* merge PR: fix immediate clearing of display after sunset #1364
+* merge PR: MI-MQTT and last retransmit #1363
+* fixed DTU-ID, now built from the unique part of the MAC
+* fix lang in `/system` #1346
+* added protection to prevent update to wrong firmware (environment check)
+
+## 0.8.56 - 2024-01-15
+* potential fix of update problems and random reboots #1359 #1354
+
+## 0.8.55 - 2024-01-14
+* merge PR: fix reboot problem with deactivated power graph #1360
+* changed scope of variables and member functions inside display classes
+* removed automatically "minimal" builds
+* fix include of "settings.h" (was already done in #1360)
+* merge PR: Enhancement: Add info about compiled modules to version string #1357
+* add info about installed binary to `/update` #1353
+* fix lang in `/system` #1346
+
+## 0.8.54 - 2024-01-13
+* added minimal version (without: MqTT, Display, History), WebUI is not changed!
+* added simulator (must be activated before compile, standard: off)
+* changed communication attempts back to 5
+
+## 0.8.53 - 2024-01-12
+* fix history graph
+* fix MqTT yield day #1331
+
+## 0.8.52 - 2024-01-11
+* possible fix of 'division by zero' #1345
+* fix lang #1348 #1346
+* fix timestamp `max AC power` #1324
+* fix stylesheet overlay `max AC power` #1324
+* fix download link #1340
+* fix history graph
+* try to fix #1331
+
+## 0.8.51 - 2024-01-10
+* fix translation #1346
+* further improve sending active power control command faster #1332
+* added history protection mask
+* merge PR: display graph improvements #1347
+
+## 0.8.50 - 2024-01-09
+* merge PR: added history charts to web #1336
+* merge PR: small display changes #1339
+* merge PR: MI - add "get loss logic" #1341
+* translated `/history`
+* fix translations in title of documents
+* added translations for error messages #1343
+
+## 0.8.49 - 2024-01-08
+* fix send total values if inverter state is different from `OFF` #1331
+* fix german language issues #1335
+
+## 0.8.48 - 2024-01-07
+* merge PR: pin selection for ESP-32 S2 #1334
+* merge PR: enhancement: power graph display option #1330
+
+## 0.8.47 - 2024-01-06
+* reduce GxEPD2 lib to compile faster
+* upgraded GxEPD2 lib to `1.5.3`
+* updated espressif32 platform to `6.5.0`
+* updated U8g2 to `2.35.9`
+* started to convert deprecated functions of new ArduinoJson `7.0.0`
+* started to have german translations of all variants (environments) #925 #1199
+* merge PR: add defines for retry attempts #1329
+
+## 0.8.46 - 2024-01-06
+* improved communication
+
+## 0.8.45 - 2024-01-05
+* fix MqTT total values #1326
+* start implementing a wizard for initial (WiFi) configuration #1199
+
+## 0.8.44 - 2024-01-05
+* fix MqTT transmission of data #1326
+* live data is read much earlier / faster and more often #1272
+
+## 0.8.43 - 2024-01-04
+* fix display of sunrise in `/system` #1308
+* fix overflow of `getLossRate` calculation #1318
+* improved MqTT by marking sent data and improved `last_success` resends #1319
+* added timestamp for `max ac power` as tooltip #1324 #1123 #1199
+* repaired Power-limit acknowledge #1322
+* fix `max_power` in `/visualization` was set to `0` after sunset
+
+## 0.8.42 - 2024-01-02
+* add LED to display whether it's night time or not. Can be reused as output to control battery system #1308
+* merge PR: beautifiying typography, added spaces between value and unit for `/visualization` #1314
+* merge PR: Prometheus add `getLossRate` and bugfixing #1315
+* add loss rate to `/visualization` in the statistics window
+* corrected `getLossRate` infos for MqTT and prometheus
+* added information about working IRQ for NRF24 and CMT2300A to `/system`
+
+## 0.8.41 - 2024-01-02
+* fix display timeout (OLED) to 60s
+* change offs to signed value
+
+## 0.8.40 - 2024-01-02
+* fix display of sunrise and sunset in `/system` #1308
+* fix MqTT set power limit #1313
+
+## 0.8.39 - 2024-01-01
+* fix MqTT dis_night_comm in the morning #1309 #1286
+* separated offset for sunrise and sunset #1308
+* powerlimit (active power control) now has one decimal place (MqTT / API) #1199
+* merge Prometheus metrics fix #1310
+* merge MI grid profile request #1306
+* merge update documentation / readme #1305
+* add `getLossRate` to radio statistics and to MqTT #1199
+
+## 0.8.38 - 2023-12-31
+* fix Grid-Profile JSON #1304
+
+## 0.8.37 - 2023-12-30
+* added grid profiles
+* format version of grid profile
+
+# RELEASE 0.8.36 - 2023-12-30
+
+## 0.8.35 - 2023-12-30
+* added dim option for LEDS
+* changed reload time for opendtufusion after update to 5s
+* fix default interval and gap for communication
+* fix serial number in exported json (was decimal, now correct as hexdecimal number)
+* beautified factory reset
+* added second stage for erase settings
+* increased maximal number of inverters to 32 for opendtufusion board (ESP32-S3)
+* fixed crash if CMT inverter is enabled, but CMT isn't configured
+
+# RELEASE 0.8.34 - 2023-12-29
+
+## 0.8.33 - 2023-12-29
+* improved communication thx @rejoe2
+
+## 0.8.32 - 2023-12-29
+* fix `start` / `stop` / `restart` commands #1287
+* added message, if profile was not read until now #1300
+* added developer option to use 'syslog-server' instead of 'web-serail' #1299
+
+## 0.8.31 - 2023-12-29
+* added class to handle timeouts PR #1298
+
+## 0.8.30 - 2023-12-28
+* added info if grid profile was not found
+* merge PR #1293
+* merge PR #1295 fix ESP8266 pin settings
+* merge PR #1297 fix layout for OLED displays
+
+## 0.8.29 - 2023-12-27
+* fix MqTT generic topic `comm_disabled` #1265 #1286
+* potential fix of #1285 (reset yield day)
+* fix fraction of yield correction #1280
+* fix crash if `getLossRate` was read from inverter #1288 #1290
+* reduce reload time for opendtufusion ethernet variant to 5 seconds
+* added basic grid parser
+* added ESP32-C3 mini environment #1289
+
+## 0.8.28 - 2023-12-23
+* fix bug heuristic
+* add version information to clipboard once 'copy' was clicked
+* add get loss rate @rejoe2
+* improve communication @rejoe2
+
+## 0.8.27 - 2023-12-18
+* fix set power limit #1276
+
+## 0.8.26 - 2023-12-17
+* read grid profile as HEX (`live` -> click inverter name -> `show grid profile`)
+
+## 0.8.25 - 2023-12-17
+* RX channel ID starts with fixed value #1277
+* fix static IP for Ethernet
+
+## 0.8.24 - 2023-12-16
+* fix NRF communication for opendtufusion ethernet variant
+
+## 0.8.23 - 2023-12-14
+* heuristics fix #1269 #1270
+* moved `sendInterval` in settings, **important:** *will be reseted to 15s after update to this version*
+* try to prevent access to radio classes if they are not activated
+* fixed millis in serial log
+* changed 'print whole trace' = `false` as default
+* added communication loop duration in [ms] to serial console
+* don't print Hex-Payload if 'print whole trace' == `false`
+
+## 0.8.22 - 2023-12-13
+* fix communication state-machine regarding zero export #1267
+
+## 0.8.21 - 2023-12-12
+* fix ethernet save inverter parameters #886
+* fix ethernet OTA update #886
+* improved radio statistics, fixed heuristic output for HMS and HMT inverters
+
+## 0.8.20 - 2023-12-12
+* improved HM communication #1259 #1249
+* fix `loadDefaults` for ethernet builds #1263
+* don't loop through radios which aren't in use #1264
+
+## 0.8.19 - 2023-12-11
+* added ms to serial log
+* added (debug) option to configure gap between inverter requests
+
+## 0.8.18 - 2023-12-10
+* copied even more from the original heuristic code #1259
+* added mDNS support #1262
+
+## 0.8.17 - 2023-12-10
+* possible fix of NRF with opendtufusion (without ETH)
+* small fix in heuristics (if conditions made assignment not comparisson)
+
+## 0.8.16 - 2023-12-09
+* fix crash if NRF is not enabled
+* updated heuristic #1080 #1259
+* fix compile opendtufusion fusion ethernet
+
+## 0.8.15 - 2023-12-09
+* added support for opendtufusion fusion ethernet shield #886
+* fixed range of HMS / HMT frequencies to 863 to 870 MHz #1238
+* changed `yield effiency` per default to `1.0` #1243
+* small heuristics improvements #1258
+* added class to combine inverter heuristics fields #1258
+
+## 0.8.14 - 2023-12-07
+* fixed decimal points for temperature (WebUI) PR #1254 #1251
+* fixed inverter statemachine available state PR #1252 #1253
+* fixed NTP update and sunrise calculation #1240 #886
+* display improvments #1248 #1247
+* fixed overflow in `hmRadio.h` #1244
+
+## 0.8.13 - 2023-11-28
+* merge PR #1239 symbolic layout for OLED 128x64 + motion senser functionality
+* fix MqTT IP addr for ETH connections PR #1240
+* added ethernet build for fusion board, not tested so far
+
+## 0.8.12 - 2023-11-20
+* added button `copy to clipboard` to `/serial`
+
+## 0.8.11 - 2023-11-20
+* improved communication, thx @rejoe2
+* improved heuristics, thx @rejoe2, @Oberfritze
+* added option to strip payload of frames to significant area
+
+## 0.8.10 - 2023-11-19
+* fix Mi and HM inverter communication #1235
+* added privacy mode option #1211
+* changed serial debug option to work without reboot
+
+## 0.8.9 - 2023-11-19
+* merged PR #1234
+* added new alarm codes
+* removed serial interval, was not in use anymore
+
+## 0.8.8 - 2023-11-16
+* fix ESP8266 save inverter #1232
+
+## 0.8.7 - 2023-11-13
+* fix ESP8266 inverter settings #1226
+* send radio statistics via MqTT #1227
+* made night communication inverter depended
+* added option to prevent adding values of inverter to total values (MqTT only) #1199
+
+## 0.8.6 - 2023-11-12
+* merged PR #1225
+* improved heuristics (prevent update of statitistic during testing)
+
+## 0.8.5 - 2023-11-12
+* fixed endless loop while switching CMT frequency
+* removed obsolete "retries" field from settings #1224
+* fixed crash while defining new invertes #1224
+* fixed default frequency settings
+* added default input power to `400` while adding new inverters
+* fixed color of wifi RSSI icon #1224
+
+## 0.8.4 - 2023-11-10
+* changed MqTT alarm topic, removed retained flag #1212
+* reduce last_success MQTT messages (#1124)
+* introduced tabs in WebGUI (inverter settings)
+* added inverter-wise power level and frequency
+
+## 0.8.3 - 2023-11-09
+* fix yield day reset during day #848
+* add total AC Max Power to WebUI
+* fix opendtufusion build (GxEPD patch)
+* fix null ptr PR #1222
+
+## 0.8.2 - 2023-11-08
+* beautified inverter settings in `setup` (preperation for future, settings become more inverter dependent)
+
+## 0.8.1 - 2023-11-05
+* added tx channel heuristics (per inverter)
+* fix statistics counter
+
+## 0.8.0 - 2023-10-??
+* switched to new communication scheme
+
+## 0.7.66 - 2023-10-04
+* prepared PA-Level for CMT
+* removed settings for number of retransmits, its fixed to `5` now
+* added parentheses to have a excactly defined behaviour
+
+## 0.7.65 - 2023-10-02
+* MI control command review #1197
+
+## 0.7.64 - 2023-10-02
+* moved active power control to modal in `live` view (per inverter) by click on current APC state
+
+## 0.7.63 - 2023-10-01
+* fix NRF24 communication #1200
+
+## 0.7.62 - 2023-10-01
+* fix communication to inverters #1198
+* add timeout before payload is tried to process (necessary for HMS/HMT)
+
+## 0.7.61 - 2023-10-01
+* merged `hmPayload` and `hmsPayload` into single class
+* merged generic radio functions into new parent class `radio.h`
+* moved radio statistics into the inverter - each inverter has now separate statistics which can be accessed by click on the footer in `/live`
+* fix compiler warnings #1191
+* fix ePaper logo during night time #1151
+
+## 0.7.60 - 2023-09-27
+* fixed typos in changelog #1172
+* fixed MqTT manual clientId storage #1174
+* fixed inverter name length in setup #1181
+* added inverter name to the header of alarm list #1181
+* improved code to avoid warning during compilation #1182
+* fix scheduler #1188, #1179
+
+## 0.7.59 - 2023-09-20
+* re-add another HM-400 hardware serial number accidentally removed with `0.7.45` (#1169)
+* merge PR #1170
+* reduce last_success MQTT messages (#1124)
+* add re-request if inverter is known to be online and first try fails
+* add alarm reporting to MI (might need review!)
+* rebuild MI limiting code closer to DTUSimMI example
+* round APC in `W` to an integer #1171
+
+## 0.7.58
+* fix ESP8266 save settings issue #1166
+
+## 0.7.57 - 2023-09-18
+* fix Alarms are always in queue (since 0.7.56)
+* fix display active power control to long for small devices #1165
+
+## 0.7.56 - 2023-09-17
+* only request alarms which were not received before #1113
+* added flag if alarm was requested but not received and re-request it #1105
+* merge PR #1163
+
+## 0.7.55 - 2023-09-17
+* fix prometheus builds
+* fix ESP32 default pinout #1159
+* added `opendtufusion-dev` because of annoying `-DARDUINO_USB_CDC_ON_BOOT=1` flag
+* fix display of current power on `index`
+* fix OTA, was damaged by version `0.7.51`, need to use webinstaller (from `0.7.51` to `0.7.54`)
+
+## 0.7.54 - 2023-09-16
+* added active power control in `W` to live view #201, #673
+* updated docu, active power control related #706
+* added current AC-Power to `index` page and removed version #763
+* improved statistic data, moved to entire struct
+* removed `/api/statistics` endpoint from REST-API
+
+## 0.7.53 - 2023-09-16
+* fix ePaper / display night behaviour #1151
+* fix ESP8266 compile error
+
+## 0.7.52 - 2023-09-16
+* fix CMT configurable pins #1150, #1159
+* update MqTT lib to version `1.4.5`
+
+## 0.7.51 - 2023-09-16
+* fix CMT configurable pins #1150
+* fix default CMT pins for opendtufusion
+* beautified `system`
+* changed main loops, fix resets #1125, #1135
+
+## 0.7.50 - 2023-09-12
+* moved MqTT info to `system`
+* added CMT info for ESP32 devices
+* improved CMT settings, now `SCLK` and `SDIO` are configurable #1046, #1150
+* changed `Power-Limit` in live-view to `Active Power Control`
+* increase length of update file selector #1132
+
+## 0.7.49 - 2023-09-11
+* merge PR: symbolic icons for mono displays, PR #1136
+* merge MI code restructuring PR #1145
+* merge Prometheus PR #1148
+* add option to strip webUI for ESP8266 (reduce code size, add ESP32 special features; `IF_ESP32` directives)
+* started to get CMT info into `system` - not finished
+
+## 0.7.48 - 2023-09-10
+* fix SSD1309 2.42" display pinout
+* improved setup page: save and delete of inverters
+
+## 0.7.47 - 2023-09-07
+* fix boot loop #1140
+* fix regex in `setup` page
+* fix MI serial number display `max-module-power` in `setup` #1142
+* renamed `opendtufusionv1` to `opendtufusion`
+
+## 0.7.46 - 2023-09-04
+* removed `delay` from ePaper
+* started improvements of `/system`
+* fix LEDs to check all configured inverters
+* send loop skip disabled inverters fix
+* print generated DTU SN to console
+* HW Versions for MI series PR #1133
+* 2.42" display (SSD1309) integration PR #1139
+* update user manual PR #1121
+* add / rename alarm codes PR #1118
+* revert default pin ESP32 for NRF23-CE #1132
+* luminance of display can be changed during runtime #1106
+
+## 0.7.45 - 2023-08-29
+* change ePaper text to symbols PR #1131
+* added some invertes to dev info list #1111
+
+## 0.7.44 - 2023-08-28
+* fix `last_success` transmitted to often #1124
+
+## 0.7.43 - 2023-08-28
+* improved RSSI for NRF24, now it's read per package (and inverter) #1129
+* arranged `heap` related info together in `/system`
+* fix display navi during save
+* clean up binary output, separated to folders
+
+## 0.7.42 - 2023-08-27
+* fix ePaper for opendtufusion_v2.x boards (Software SPI)
+* add signal strength for NRF24 - PR #1119
+* refactor wifi class to support ESP32 S2 PR #1127
+* update platform for ESP32 to 6.3.2
+* fix opendtufusion LED (were mixed)
+* fix `last_success` transmitted to often #1124
+* added ESP32-S3-mini to github actions
+* added old Changelog Entries, to have full log of changes
+
+## 0.7.41 - 2023-08-26
+* merge PR #1117 code spelling fixes #1112
+* alarms were not read after the first day
+
+## 0.7.40 - 2023-08-21
+* added default pins for opendtu-fusion-v1 board
+* fixed hw version display in `live`
+* removed development builds, renamed environments in `platform.ini`
+
+## 0.7.39 - 2023-08-21
+* fix background color of invalid inputs
+* add hardware info (click in `live` on inverter name)
+
+## 0.7.38 - 2023-08-21
+* reset alarms at midnight (if inverter is not available) #1105, #1096
+* add option to reset 'max' values on midnight #1102
+* added default pins for CMT2300A (matching OpenDTU)
+
+## 0.7.37 - 2023-08-18
+* fix alarm time on WebGui #1099
+* added RSSI info for HMS and HMT inverters (MqTT + REST API)
+
+# RELEASE 0.7.36 - 2023-08-18
+
+## 0.7.35 - 2023-08-17
+* fixed timestamp for alarms send over MqTT
+* auto-patch of `AsyncWebServer` #834, #1036
+* Update documentation in Git regarding `ESP8266` default NRF24 pin assignments
+
+## 0.7.34 - 2023-08-16
+* fixed timezone offset of alarms
+* added `AC` and `DC` to `/live` #1098
+* changed `ESP8266` default NRF24 pin assignments (`D3` = `CE` and `D4` = `IRQ`)
+* fixed background of modal window for bright color
+* fix MI crashes
+* fix some lost debug messages
+* merged PR #1095, MI fixes for 0.7.x versions
+* fix scheduled reboot #1097
+* added vector graphic logo `/doc/logo.svg`
+* merge PR #1093, improved Nokia5110 display layout
+
+## 0.7.33 - 2023-08-15
+* add alarms overview to WebGui #608
+* fix webGui total values #1084
+
+## 0.7.32 - 2023-08-14
+* fix colors of live view #1091
+
+## 0.7.31 - 2023-08-13
+* fixed docu #1085
+* changed active power limit MqTT messages to QOS2 #1072
+* improved alarm messages, added alarm-id to log #1089
+* trigger power limit read on next day (if inverter was offline meanwhile)
+* disabled improv implementation to check if it is related to 'Schwuppdizitaet'
+* changed live view to gray once inverter isn't available
+* added inverter status to API
+* changed sum of totals on WebGui depending on inverter status #1084
+* merge maximum power (AC and DC) from PR #1080
+
+## 0.7.30 - 2023-08-10
+* attempt to improve speed / response times (Schwuppdizitaet) #1075
+
+## 0.7.29 - 2023-08-09
+* MqTT alarm data was never sent, fixed
+* REST API: added alarm data
+* REST API: made get record obsolete
+* REST API: added power limit acknowledge `/api/inverter/id/[0-x]` #1072
+
+## 0.7.28 - 2023-08-08
+* fix MI inverter support #1078
+
+## 0.7.27 - 2023-08-08
+* added compile option for ethernet #886
+* fix ePaper configuration, missing `Busy`-Pin #1075
+
+# RELEASE 0.7.26 - 2023-08-06
+
+* fix MqTT `last_success`
+
+# RELEASE 0.7.25 - 2023-08-06
+
+## 0.7.24 - 2023-08-05
+* merge PR #1069 make MqTT client ID configurable
+* fix #1016, general MqTT status depending on inverter state machine
+* changed icon for fully available inverter to a filled check mark #1070
+* fixed `last_success` update with MqTT #1068
+* removed `improv` esp-web-installer script, because it is not fully functional at this time
+
+## 0.7.23 - 2023-08-04
+* merge PR #1056, visualization html
+* update MqTT library to 1.4.4
+* update RF24 library to 1.4.7
+* update ArduinoJson library to 6.21.3
+* set minimum invervall for `/live` to 5 seconds
+
+## 0.7.22 - 2023-08-04
+* attempt to fix homeassistant auto discovery #1066
+
+## 0.7.21 - 2023-07-30
+* fix MqTT YieldDay Total goes to 0 several times #1016
+
+## 0.7.20 - 2023-07-28
+* merge PR #1048 version and hash in API, fixes #1045
+* fix: no yield day update if yield day reads `0` after inverter reboot (mostly on evening) #848
+* try to fix Wifi override #1047
+* added information after NTP sync to WebUI #1040
+
+## 0.7.19 - 2023-07-27
+* next attempt to fix yield day for multiple inverters #1016
+* reduced threshold for inverter state machine from 60min to 15min to go from state `WAS_ON` to `OFF`
+
+## 0.7.18 - 2023-07-26
+* next attempt to fix yield day for multiple inverters #1016
+
+## 0.7.17 - 2023-07-25
+* next attempt to fix yield day for multiple inverters #1016
+* added two more states for the inverter status (also docu)
+
+## 0.7.16 - 2023-07-24
+* next attempt to fix yield day for multiple inverters #1016
+* fix export settings date #1040
+* fix time on WebUI (timezone was not observed) #913 #1016
+
+## 0.7.15 - 2023-07-23
+* add NTP sync interval #1019
+* adjusted range of contrast / luminance setting #1041
+* use only ISO time format in Web-UI #913
+
+## 0.7.14 - 2023-07-23
+* fix Contrast for Nokia Display #1041
+* attempt to fix #1016 by improving inverter status
+* added option to adjust efficiency for yield (day/total) #1028
+
+## 0.7.13 - 2023-07-19
+* merged display PR #1027
+* add date, time and version to export json #1024
+
+## 0.7.12 - 2023-07-09
+* added inverter status - state-machine #1016
+
+## 0.7.11 - 2023-07-09
+* fix MqTT endless loop #1013
+
+## 0.7.10 - 2023-07-08
+* fix MqTT endless loop #1013
+
+## 0.7.9 - 2023-07-08
+* added 'improve' functions to set wifi password directly with ESP web tools #1014
+* fixed MqTT publish while applying power limit #1013
+* slightly improved HMT live view (Voltage & Current)
+
+## 0.7.8 - 2023-07-05
+* fix `YieldDay`, `YieldTotal` and `P_AC` in `TotalValues` #929
+* fix some serial debug prints
+* merge PR #1005 which fixes issue #889
+* merge homeassistant PR #963
+* merge PR #890 which gives option for scheduled reboot at midnight (default off)
+
+## 0.7.7 - 2023-07-03
+* attempt to fix MqTT `YieldDay` in `TotalValues` #927
+* attempt to fix MqTT `YieldDay` and `YieldTotal` even if inverters are not completely available #929
+* fix wrong message 'NRF not connected' if it is disabled #1007
+
+## 0.7.6 - 2023-06-17
+* fix display of hidden SSID checkbox
+* changed yield correction data type to `double`, now decimal places are supported
+* corrected name of 0.91" display in settings
+* attempt to fix MqTT zero values only if setting is there #980, #957
+* made AP password configurable #951
+* added option to start without time-sync, eg. for AP-only-mode #951
+
+## 0.7.5 - 2023-06-16
+* fix yield day reset on midnight #957
+* improved tickers in `app.cpp`
+
+## 0.7.4 - 2023-06-15
+* fix MqTT `P_AC` send if inverters are available #987
+* fix assignments for HMS 1CH and 2CH devices
+* fixed uptime overflow #990
+
+## 0.7.3 - 2023-06-09
+* fix hidden SSID scan #983
+* improved NRF24 missing message on home screen #981
+* fix MqTT publishing only updated values #982
+
+## 0.7.2 - 2023-06-08
+* fix HMS-800 and HMS-1000 assignments #981
+* make nrf enabled all the time for ESP8266
+* fix menu item `active` highlight for 'API' and 'Doku'
+* fix MqTT totals issue #927, #980
+* reduce maximum number of inverters to 4 for ESP8266, increase to 16 for ESP32
+
+## 0.7.1 - 2023-06-05
+* enabled power limit control for HMS / HMT devices
+* changed NRF24 lib version back to 1.4.5 because of compile problems for EPS8266
+
+## 0.7.0 - 2023-06-04
+* HMS / HMT support for ESP32 devices
+
+## 0.6.15 - 2023-05-25
+* improved Prometheus Endpoint PR #958
+* fix turn off ePaper only if setting was set #956
+* improved reset values and update MqTT #957
+
+## 0.6.14 - 2023-05-21
+* merge PR #902 Mono-Display
+
+## 0.6.13 - 2023-05-16
+* merge PR #934 (fix JSON API) and #944 (update manual)
+
+## 0.6.12 - 2023-04-28
+* improved MqTT
+* fix menu active item
+
+## 0.6.11 - 2023-04-27
+* added MqTT class for publishing all values in Arduino `loop`
+
+## 0.6.10 - HMS
+* Version available in `HMS` branch
+
+# RELEASE 0.6.9 - 2023-04-19
+
+## 0.6.8 - 2023-04-19
+* fix #892 `zeroYieldDay` loop was not applied to all channels
+
+## 0.6.7 - 2023-04-13
+* merge PR #883, improved store of settings and javascript, thx @tastendruecker123
+* support `.` and `,` as floating point separator in setup #881
+
+## 0.6.6 - 2023-04-12
+* increased distance for `import` button in mobile view #879
+* changed `led_high_active` to `bool` #879
+
+## 0.6.5 - 2023-04-11
+* fix #845 MqTT subscription for `ctrl/power/[IV-ID]` was missing
+* merge PR #876, check JSON settings during read for existence
+* **NOTE:** incompatible change: renamed `led_high_active` to `act_high`, maybe setting must be changed after update
+* merge PR #861 do not send channel metric if channel is disabled
+
+## 0.6.4 - 2023-04-06
+* merge PR #846, improved NRF24 communication and MI, thx @beegee3 & @rejoe2
+* merge PR #859, fix burger menu height, thx @ThomasPohl
+
+## 0.6.3 - 2023-04-04
+* fix login, password length was not checked #852
+* merge PR #854 optimize browser caching, thx @tastendruecker123 #828
+* fix WiFi reconnect not working #851
+* updated issue templates #822
+
+## 0.6.2 - 2023-04-04
+* fix login from multiple clients #819
+* fix login screen on small displays
+
+## 0.6.1 - 2023-04-01
+* merge LED fix - LED1 shows MqTT state, LED configurable active high/low #839
+* only publish new inverter data #826
+* potential fix of WiFi hostname during boot up #752
+
+# RELEASE 0.6.0 - 2023-03-27
+
+## 0.5.110
+* MQTT fix reconnection by new lib version #780
+* add `about` page
+* improved documentation regarding SPI pins #814
+* improved documentation (getting started) #815 #816
+* improved MI 4-ch inverter #820
+
+## 0.5.109
+* reduced heap fragmentation by optimizing MqTT #768
+* ePaper: centered text thx @knickohr
+
+## 0.5.108
+* merge: PR SPI pins configurable (ESP32) #807, #806 (requires manual set of MISO=19, MOSI=23, SCLK=18 in GUI for existing installs)
+* merge: PR MI serial outputs #809
+* fix: no MQTT `total` sensor for autodiscover if only one inverter was found #805
+* fix: MQTT `total` renamed to `device_name` + `_TOTOL` for better visibility #805
+
+## 0.5.107
+* fix: show save message
+* fix: removed serial newline for `enqueueCmd`
+* Merged improved Prometheus #808
+
+## 0.5.106
+* merged MI and debug message changes #804
+* fixed MQTT autodiscover #794, #632
+
+## 0.5.105
+* merged MI, thx @rejoe2 #788
+* fixed reboot message #793
+
+## 0.5.104
+* further improved save settings
+* removed `#` character from ePaper
+* fixed saving pinout for `Nokia-Display`
+* removed `Reset` Pin for monochrome displays
+* improved wifi connection #652
+
+## 0.5.103
+* merged MI improvements, thx @rejoe2 #778
+* changed display inverter online message
+* merged heap improvements #772
+
+## 0.5.102
+* Warning: old exports are not compatible any more!
+* fix JSON import #775
+* fix save settings, at least already stored settings are not lost #771
+* further save settings improvements (only store inverters which are existing)
+* improved display of settings save return value
+* made save settings asynchronous (more heap memory is free)
+
+## 0.5.101
+* fix SSD1306
+* update documentation
+* Update miPayload.h
+* Update README.md
+* MI - remarks to user manual
+* MI - fix AC calc
+* MI - fix status msg. analysis
+
+## 0.5.100
+* fix add inverter `setup.html` #766
+* fix MQTT retained flag for total values #726
+* renamed buttons for import and export `setup.html`
+* added serial message `settings saved`
+
+## 0.5.99
+* fix limit in [User_Manual.md](../User_Manual.md)
+* changed `contrast` to `luminance` in `setup.html`
+* try to fix SSD1306 display #759
+* only show necessary display pins depending on setting
+
+## 0.5.98
+* fix SH1106 rotation and turn off during night #756
+* removed MQTT subscription `sync_ntp`, `set_time` with a value of `0` does the same #696
+* simplified MQTT subscription for `limit`. Check [User_Manual.md](../User_Manual.md) for new syntax #696, #713
+* repaired inverter wise limit control
+* fix upload settings #686
+
+## 0.5.97
+* Attention: re-ordered display types, check your settings! #746
+* improved saving settings of display #747, #746
+* disabled contrast for Nokia display #746
+* added Prometheus as compile option #719, #615
+* update MQTT lib to v1.4.1
+* limit decimal places to 2 in `live`
+* added `-DPIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48` to esp8266 debug build #657
+* a `max-module-power` of `0` disables channel in live view `setup`
+* merge MI improvements, get firmware information #753
+
+## 0.5.96
+* added Nokia display again for ESP8266 #764
+* changed `var` / `VAr` to SI unit `var` #732
+* fix MQTT retained flags for totals (P_AC, P_DC) #726, #721
+
+## 0.5.95
+* merged #742 MI Improvements
+* merged #736 remove obsolete JSON Endpoint
+
+## 0.5.94
+* added ePaper (for ESP32 only!), thx @dAjaY85 #735
+* improved `/live` margins #732
+* renamed `var` to `VAr` #732
+
+## 0.5.93
+* improved web API for `live`
+* added dark mode option
+* converted all forms to reponsive design
+* repaired menu with password protection #720, #716, #709
+* merged MI series fixes #729
+
+## 0.5.92
+* fix mobile menu
+* fix inverters in select `serial.html` #709
+
+## 0.5.91
+* improved html and navi, navi is visible even when API dies #660
+* reduced maximum allowed JSON size for API to 6000Bytes #660
+* small fix: output command at `prepareDevInformCmd` #692
+* improved inverter handling #671
+
+## 0.5.90
+* merged PR #684, #698, #705
+* webserial minor overflow fix #660
+* web `index.html` improve version information #701
+* fix MQTT sets power limit to zero (0) #692
+* changed `reset at midnight` with timezone #697
+
+## 0.5.89
+* reduced heap fragmentation (removed `strtok` completely) #644, #645, #682
+* added part of mac address to MQTT client ID to separate multiple ESPs in same network
+* added dictionary for MQTT to reduce heap-fragmentation
+* removed `last Alarm` from Live view, because it showed always the same alarm - will change in future
+
+## 0.5.88
+* MQTT Yield Day zero, next try to fix #671, thx @beegee3
+* added Solenso inverter to supported devices
+* improved reconnection of MQTT #650
+
+## 0.5.87
+* fix yield total correction as module (inverter input) value #570
+* reneabled instant start communication (once NTP is synced) #674
+
+## 0.5.86
+* prevent send devcontrol request during disabled night communication
+* changed yield total correction as module (inverter input) value #570
+* MQTT Yield Day zero, next try to fix #671
+
+## 0.5.85
+* fix power-limit was not checked for max retransmits #667
+* fix blue LED lights up all the time #672
+* fix installing schedulers if NTP server isn't available
+* improved zero values on triggers #671
+* hardcoded MQTT subtopics, because wildcard `#` leads to errors
+* rephrased some messages on webif, thx to @Argafal #638
+* fixed 'polling stop message' on `index.html` #639
+
+## 0.5.84
+* fix blue LED lights up all the time #672
+* added an instant start communication (once NTP is synced)
+* add MI 3rd generation inverters (10x2 serial numbers)
+* first decodings of messages from MI 2nd generation inverters
+
+## 0.5.83
+* fix MQTT publishing, `callback` was set but reset by following `setup()`
+
+## 0.5.82
+* fixed communication error #652
+* reset values is no bound to MQTT any more, setting moved to `inverter` #649
+* fixed wording on `index.hmtl` #661
+
+## 0.5.81
+* started implementation of MI inverters (setup.html, own processing `MiPayload.h`)
+
+## 0.5.80
+* fixed communication #656
+
+## 0.5.79
+* fixed mixed reset flags #648
+* fixed `mCbAlarm` if MQTT is not used #653
+* fixed MQTT `autodiscover` #630 thanks to @antibill51
+* next changes from @beegee many thanks for your contribution!
+* replaced `CircularBuffer` by `std::queue`
+* reworked `hmRadio.h` completely (interrupts, packaging)
+* fix exception while `reboot`
+* cleanup MQTT coding
+
+## 0.5.78
+* further improvements regarding wifi #611, fix connection if only one AP with same SSID is there
+* fix endless loop in `zerovalues` #564
+* fix auto discover again #565
+* added total values to autodiscover #630
+* improved zero at midnight #625
+
+## 0.5.77
+* fix wrong filename for automatically created manifest (online installer) #620
+* added rotate display feature #619
+* improved Prometheus endpoint #615, thx to @fsck-block
+* improved wifi to connect always to strongest RSSI, thx to @beegee3 #611
+
+## 0.5.76
+* reduce MQTT retry interval from maximum speed to one second
+* fixed homeassistant autodiscovery #565
+* implemented `getNTPTime` improvements #609 partially #611
+* added alarm messages to MQTT #177, #600, #608
+
+## 0.5.75
+* fix wakeup issue, once wifi was lost during night the communication didn't start in the morning
+* re-enabled FlashStringHelper because of lacking RAM
+* complete rewrite of monochrome display class, thx to @dAjaY85 -> displays are now configurable in setup
+* fix power limit not possible #607
+
+## 0.5.74
+* improved payload handling (retransmit all fragments on CRC error)
+* improved `isAvailable`, checks all record structs, inverter becomes available more early because version is check first
+* fix tickers were not set if NTP is not available
+* disabled annoying `FlashStringHelper` it gives randomly Exceptions during development, feels more stable since then
+* moved erase button to the bottom in settings, not nice but more functional
+* split `tx_count` to `tx_cnt` and `retransmits` in `system.html`
+* fix mqtt retransmit IP address #602
+* added debug infos for `scheduler` (web -> `/debug` as trigger prints list of tickers to serial console)
+
+## 0.5.73
+* improved payload handling (request / retransmit) #464
+* included alarm ID parse to serial console (in development)
+
+## 0.5.72
+* repaired system, scheduler was not called any more #596
+
+## 0.5.71
+* improved wifi handling and tickers, many thanks to @beegee3 #571
+* fixed YieldTotal correction calculation #589
+* fixed serial output of power limit acknowledge #569
+* reviewed `sendDiscoveryConfig` #565
+* merged PR `Monodisplay`, many thanks to @dAjaY85 #566, Note: (settings are introduced but not able to be modified, will be included in next version)
+
+## 0.5.70
+* corrected MQTT `comm_disabled` #529
+* fix Prometheus and JSON endpoints (`config_override.h`) #561
+* publish MQTT with fixed interval even if inverter is not available #542
+* added JSON settings upload. NOTE: settings JSON download changed, so only settings should be uploaded starting from version `0.5.70` #551
+* MQTT topic and inverter name have more allowed characters: `[A-Za-z0-9./#$%&=+_-]+`, thx: @Mo Demman
+* improved potential issue with `checkTicker`, thx @cbscpe
+* MQTT option for reset values on midnight / not avail / communication stop #539
+* small fix in `tickIVCommunication` #534
+* add `YieldTotal` correction, eg. to have the option to zero at year start #512
+
+## 0.5.69
+* merged SH1106 1.3" Display, thx @dAjaY85
+* added SH1106 to automatic build
+* added IP address to MQTT (version, device and IP are retained and only transmitted once after boot) #556
+* added `set_power_limit` acknowledge MQTT publish #553
+* changed: version, device name are only published via MQTT once after boot
+* added `Login` to menu if admin password is set #554
+* added `development` to second changelog link in `index.html` #543
+* added interval for MQTT (as option). With this settings MQTT live data is published in a fixed timing (only if inverter is available) #542, #523
+* added MQTT `comm_disabled` #529
+* changed name of binaries, moved GIT-Sha to the front #538
+
+## 0.5.68
+* repaired receive payload
+* Powerlimit is transferred immediately to inverter
+
+## 0.5.67
+* changed calculation of start / stop communication to 1 min after last comm. stop #515
+* moved payload send to `payload.h`, function `ivSend` #515
+* payload: if last frame is missing, request all frames again
+
+# RELEASE 0.5.66 - 2022-12-30
+
+## 0.5.65
+* wifi, code optimization #509
+
+## 0.5.64
+* channel name can use any character, not limited any more
+* added `/` to MQTT topic and Inverter name
+* trigger for `calcSunrise` is now using local time #515
+* fix reconnect timeout for WiFi #509
+* start AP only after boot, not on WiFi connection loss
+* improved /system `free_heap` value (measured before JSON-tree is built)
+
+## 0.5.63
+* fix Update button protection (prevent double click #527)
+* optimized scheduler #515 (thx @beegee3)
+* potential fix of #526 duplicates in API `/api/record/live`
+* added update information to `index.html`
+
+## 0.5.62
+* fix MQTT `status` update
+* removed MQTT `available_text` (can be deducted from `available`)
+* enhanced MQTT documentation in `User_Manual.md`
+* removed `tickSunset` and `tickSunrise` from MQTT. It's not needed any more because of minute wise check of status (`processIvStatus`)
+* changed MQTT topic `status` to nummeric value, check documentation in `User_Manual.md`
+* fix regular expression of `setup.html` for inverter name and channel name
+
+## 0.5.61
+* fix #521 no reconnect at beginning of day
+* added immediate (each minute) report of inverter status MQTT #522
+* added protection mask to select which pages should be protected
+* update of monochrome display, show values also if nothing changed
+
+## 0.5.60
+* added regex to inverter name and MQTT topic (setup.html)
+* beautified serial.html
+* added ticker for wifi loop #515
+
+## 0.5.59
+* fix night communication enable
+* improved different WiFi connection scenarios (STA WiFi not found, reconnect #509, redirect for AP to configuration)
+* increased MQTT user, pwd and topic length to 64 characters + `\0`. (The string end `\0` reduces the available size by one) #516
+
+## 0.5.58
+* improved stability
+* improved WiFi initial connection - especially if station WiFi is not available
+* removed new operators from web.h (reduce dynamic allocation)
+* improved sun calculation #515, #505
+* fixed WiFi auto reconnect #509
+* added disable night communication flag to MQTT #505
+* changed MQTT publish of `available` and `available_text` to sunset #468
+
+## 0.5.57
+* improved stability
+* added icons to index.html, added WiFi-strength symbol on each page
+* moved packet stats and sun to system.html
+* refactored communication offset (adjustable in minutes now)
+
+## 0.5.56
+* factory reset formats entire little fs
+* renamed sunrise / sunset on index.html to start / stop communication
+* show system information only if called directly from menu
+* beautified system.html
+
+## 0.5.55
+* fixed static IP save
+
+## 0.5.54
+* changed sunrise / sunset calculation, angle is now `-3.5` instead of original `-0.83`
+* improved scheduler (removed -1 from `reload`) #483
+* improved reboot flag in `app.h`
+* fixed #493 no MQTT payload once display is defined
+
+## 0.5.53
+* Mono-Display: show values in offline mode #498
+* improved WiFi class #483
+* added communication enable / disable (to test multiple DTUs with the same inverter)
+* fix factory reset #495
+
+## 0.5.52
+* improved ahoyWifi class
+* added interface class for app
+* refactored web and webApi -> RestApi
+* fix calcSunrise was not called every day
+* added MQTT RX counter to index.html
+* all values are displayed on /live even if they are 0
+* added MQTT <TOPIC>/status to show status over all inverters
+
+## 0.5.51
+* improved scheduler, @beegee3 #483
+* refactored get NTP time, @beegee3 #483
+* generate `bin.gz` only for 1M device ESP8285
+* fix calcSunrise was not called every day
+* increased number of allowed characters for MQTT user, broker and password, @DanielR92
+* added NRF24 info to Systeminfo, @DanielR92
+* added timezone for monochrome displays, @gh-fx2
+* added support for second inverter for monochrome displays, @gh-fx2
+
+## 0.5.50
+* fixed scheduler, uptime and timestamp counted too fast
+* added / renamed automatically build outputs
+* fixed MQTT ESP uptime on reconnect (not zero any more)
+* changed uptime on index.html to count each second, synced with ESP each 10 seconds
+
+## 0.5.49
+* fixed AP mode on brand new ESP modules
+* fixed `last_success` MQTT message
+* fixed MQTT inverter available status at sunset
+* reordered enqueue commands after boot up to prevent same payload length for successive commands
+* added automatic build for Nokia5110 and SSD1306 displays (ESP8266)
+
+## 0.5.48
+* added MQTT message send at sunset
+* added monochrome display support
+* added `once` and `onceAt` to scheduler to make code cleaner
+* improved sunrise / sunset calculation
+
+## 0.5.47
+* refactored ahoyWifi class: AP is opened on every boot, once station connection is successful the AP will be closed
+* improved NTP sync after boot, faster sync
+* fix NRF24 details only on valid SPI connection
+
+## 0.5.46
+* fix sunrise / sunset calculation
+* improved setup.html: `reboot on save` is checked as default
+
+## 0.5.45
+* changed MQTT last will topic from `status` to `mqtt`
+* fix sunrise / sunset calculation
+* fix time of serial web console
+
+## 0.5.44
+* marked some MQTT messages as retained
+* moved global functions to global location (no duplicates)
+* changed index.html interval to static 10 seconds
+* fix static IP
+* fix NTP with static IP
+* print MQTT info only if MQTT was configured
+
+## 0.5.43
+* updated REST API and MQTT (both of them use the same functionality)
+* added ESP-heap information as MQTT message
+* changed output name of automatic development build to fixed name (to have a static link from https://ahoydtu.de)
+* updated user manual to latest MQTT and API changes
+
+## 0.5.42
+* fix web logout (auto logout)
+* switched MQTT library
+
+# RELEASE 0.5.41 - 2022-11-22
+
+# RELEASE 0.5.28 - 2022-10-30
+
+# RELEASE 0.5.17 - 2022-09-06
+
+# RELEASE 0.5.16 - 2022-09-04
 
-full version log: [Development Log](https://github.com/lumapu/ahoy/blob/development03/src/CHANGES.md)