Merge branch 'main' into development03

User_Manual.md

@@ -321,6 +321,19 @@ Send Power Limit:
 - A persistent limit is only needed if you want to throttle your inverter permanently or you can use it to set a start value on the battery, which is then always the switch-on limit when switching on, otherwise it would ramp up to 100% without regulation, which is continuous load is not healthy.
 - You can set a new limit in the turn-off state, which is then used for on (switching on again), otherwise the last limit from before the turn-off is used, but of course this only applies if DC voltage is applied the whole time.
 - If the DC voltage is missing for a few seconds, the microcontroller in the inverter goes off and forgets everything that was temporary/non-persistent in the RAM: YieldDay, error memory, non-persistent limit.
+### Update your AHOY-DTU Firmware
+To update your AHOY-DTU, you have to download the latest firmware package.
+Here are the [latest stable releases](https://github.com/lumapu/ahoy/releases/) and [latest development builds](https://nightly.link/lumapu/ahoy/workflows/compile_development/development03/ahoydtu_dev.zip) available for download.
+As soon as you have downloaded the firmware package, unzip it. On the WebUI, navigate to Update and press on select firmware file.
+From the unzipped files, select the right .bin file for your hardware and needs.
+- If you use an ESP8266, select the file ending with esp8266.bin 
+- If you use an ESP8266 with prometheus, select the file ending with esp8266_prometheus.bin 
+- If you use an ESP32, select the file ending with esp32.bin
+- If you use an ESP32 with prometheus, select the file ending with esp32_prometheus.bin
+
+Note: if you want to use prometheus, the usage of an ESP32 is recommended, since the ESP8266 is at its performance limits and therefore can cause stability issues.
+
+After selecting the right firmware file, press update. Your AHOY-DTU will now install the new firmware and reboot.
 
 ## Additional Notes
 ### MI Inverters

tools/rpi/ahoy.yml.example

@@ -2,11 +2,14 @@
 
 ahoy:
   interval: 5
+  transmit_retries: 5
 
   logging:
     filename: 'hoymiles.log'
     # DEBUG, INFO, WARNING, ERROR, FATAL
     level: 'INFO'
+    max_log_filesize: 1000000
+    max_log_files: 1
 
   sunset:
     disabled: false

tools/rpi/hoymiles/__init__.py

@@ -297,8 +297,8 @@ class InverterPacketFragment:
 
 class HoymilesNRF:
     """Hoymiles NRF24 Interface"""
-    tx_channel_id = 0
-    tx_channel_list = [40]
+    tx_channel_id = 2
+    tx_channel_list = [3,23,40,61,75]
     rx_channel_id = 0
     rx_channel_list = [3,23,40,61,75]
     rx_channel_ack = False
@@ -332,6 +332,12 @@ class HoymilesNRF:
         :rtype: bool
         """
 
+        self.next_tx_channel()
+
+        if HOYMILES_TRANSACTION_LOGGING:
+            c_datetime = datetime.now().strftime("%Y-%m-%d %H:%M:%S.%f")
+            logging.debug(f'{c_datetime} Transmit {len(packet)} bytes channel {self.tx_channel}: {hexify_payload(packet)}')
+
         if not txpower:
             txpower = self.txpower
 
@@ -363,13 +369,13 @@ class HoymilesNRF:
         """
         Receive Packets
 
-        :param timeout: receive timeout in nanoseconds (default: 12e8)
+        :param timeout: receive timeout in nanoseconds (default: 5e8)
         :type timeout: int
         :yields: fragment
         """
 
         if not timeout:
-            timeout=12e8
+            timeout=5e8
 
         self.radio.setChannel(self.rx_channel)
         self.radio.setAutoAck(False)
@@ -415,7 +421,7 @@ class HoymilesNRF:
                     self.radio.setChannel(self.rx_channel)
                     self.radio.startListening()
 
-            time.sleep(0.005)
+            time.sleep(0.004)
 
     def next_rx_channel(self):
         """
@@ -433,6 +439,15 @@ class HoymilesNRF:
             return True
         return False
 
+    def next_tx_channel(self):
+        """
+        Select next channel from hop list
+
+        """
+        self.tx_channel_id = self.tx_channel_id + 1
+        if self.tx_channel_id >= len(self.tx_channel_list):
+            self.tx_channel_id = 0
+
     @property
     def tx_channel(self):
         """
@@ -612,10 +627,6 @@ class InverterTransaction:
 
         packet = self.tx_queue.pop(0)
 
-        if HOYMILES_TRANSACTION_LOGGING:
-            c_datetime = datetime.now().strftime("%Y-%m-%d %H:%M:%S.%f")
-            logging.debug(f'{c_datetime} Transmit {len(packet)} | {hexify_payload(packet)}')
-
         self.radio.transmit(packet, txpower=self.txpower)
 
         wait = False

tools/rpi/hoymiles/__main__.py

@@ -19,6 +19,7 @@ import yaml
 from yaml.loader import SafeLoader
 import hoymiles
 import logging
+from logging.handlers import RotatingFileHandler
 
 ################################################################################
 """ Signal Handler """
@@ -127,6 +128,7 @@ def main_loop(ahoy_config):
     dtu_name = ahoy_config.get('dtu', {}).get('name', 'hoymiles-dtu')
     sunset.sun_status2mqtt(dtu_ser, dtu_name)
     loop_interval = ahoy_config.get('interval', 1)
+    transmit_retries = ahoy_config.get('transmit_retries', 5)
 
     try:
         do_init = True
@@ -143,7 +145,7 @@ def main_loop(ahoy_config):
                    sys.exit(999)
                 if hoymiles.HOYMILES_DEBUG_LOGGING:
                     logging.info(f'Poll inverter name={inverter["name"]} ser={inverter["serial"]}')
-                poll_inverter(inverter, dtu_ser, do_init, 3)
+                poll_inverter(inverter, dtu_ser, do_init, transmit_retries)
             do_init = False
 
             if loop_interval > 0:
@@ -298,6 +300,8 @@ def init_logging(ahoy_config):
     log_config = ahoy_config.get('logging')
     fn = 'hoymiles.log'
     lvl = logging.ERROR
+    max_log_filesize = 1000000
+    max_log_files = 1
     if log_config:
         fn = log_config.get('filename', fn)
         level = log_config.get('level', 'ERROR')
@@ -311,9 +315,11 @@ def init_logging(ahoy_config):
             lvl = logging.ERROR
         elif level == 'FATAL':
             lvl = logging.FATAL
+        max_log_filesize  = log_config.get('max_log_filesize', max_log_filesize)
+        max_log_files = log_config.get('max_log_files', max_log_files)
     if hoymiles.HOYMILES_TRANSACTION_LOGGING:
        lvl = logging.DEBUG
-    logging.basicConfig(filename=fn, format='%(asctime)s %(levelname)s: %(message)s', datefmt='%Y-%m-%d %H:%M:%S', level=lvl)
+    logging.basicConfig(handlers=[RotatingFileHandler(fn, maxBytes=max_log_filesize, backupCount=max_log_files)], format='%(asctime)s %(levelname)s: %(message)s', datefmt='%Y-%m-%d %H:%M:%S', level=lvl)
     dtu_name = ahoy_config.get('dtu',{}).get('name','hoymiles-dtu')
     logging.info(f'start logging for {dtu_name} with level: {logging.root.level}')
 

tools/rpi/hoymiles/decoders/__init__.py

@@ -515,9 +515,17 @@ class Hm300Decode0B(StatusResponse):
         """ reactive power """
         return self.unpack('>H', 20)[0]/10
     @property
+    def powerfactor(self):
+        """ Powerfactor """
+        return self.unpack('>H', 24)[0]/1000
+    @property
     def temperature(self):
         """ Inverter temperature in °C """
         return self.unpack('>h', 26)[0]/10
+    @property
+    def event_count(self):
+        """ Event counter """
+        return self.unpack('>H', 28)[0]
 
 class Hm300Decode0C(Hm300Decode0B):
     """ 1121-series mirco-inverters status data """