topaLE/ahoy - ahoy - Gitea: Git with a cup of tea

Commit Graph

Author	SHA1	Message	Date
lumapu	7844ea2946	* moved mqtt loop out of `checkTicker` as mentioned in #49 * added irritation and efficiency calculations ( EPPROM CHANGE - YOUR SETTINGS MAYBE BECOME CURRUPT! ) * improved style	2 years ago
lumapu	8238e90903	* fix #38 current assignment for 4-channel inverters * added last received timestamp in /hoymiles livedata web page #47 * improved style.css * improved NTP as described in #46	2 years ago
lumapu	99f829ac87	* added free heap, mentioned in #24 (added in serial print, status on index and mqtt) * fixed #45, AC current by factor 10 too high * fixed failed payload counter	2 years ago
lumapu	a35cb414a8	* fixed #41 HM800 Yield total and Yield day were mixed around. Found issue while comparing to Python version * fixed #43 HM350 channel 2 is displayed in Live-View * added #42 YieldTotal and YieldTotal Day for HM600 - HM800 inverters	2 years ago
lumapu	5acce759e0	* fix #39 Assignment 2-Channel inverters (HM-600, HM-700, HM-800)	2 years ago
lumapu	6871bf4247	* multi inverter support * full re transmit included	2 years ago
lumapu	724f0ab83a	* complete payload processed (and crc checked) * inverter type is defined by serial number * serial debug can be switched live (using setup) -> Note: only one inverter is supported for now!	2 years ago
lumapu	f2e7105cb3	fix #26 ticker / interval in app.cpp	2 years ago
lumapu	b485cb8151	* improved stability (in comparison to 0.3.7) * reset wifi AP timout once a client is detected * fix #26 wrong variable reset	2 years ago
lumapu	37206847c5	* added rx channel switching * switched to crc8 check for valid packet-payload	2 years ago
lumapu	8f444cee2f	* improved tickers, only one ticker is active * added feature to use the ESP as access point for all the time * added serial features to setup	2 years ago
lumapu	4c3852cde4	* fixed erase settings * fixed behavior if no MQTT IP is set (the system was nearly unusable because of delayed responses) * fixed Station / AP WiFi on startup -> more information will be printed to the serial console * added new ticker for serial value dump	2 years ago
lumapu	539d4f73c1	* added config.h for general configuration * added option to compile WiFi SSID + PWD to firmware * added option to configure WiFi access point name and password * added feature to retry connect to station WiFi (configurable timeouts) * updated index.html * added option for factory reset * added info about project on index.html * moved "update" and "home" to footer * fixed #23 HM1200 yield day unit * fixed DNS name of ESP after setup (some commits before)	2 years ago
lumapu	2abd388726	* converted to "poor-man-ticker" using millis() for uptime, send and mqtt * added inverter overview * added send count to statistics	2 years ago
lumapu	89624f7f02	compile of merge, binary published on https://www.mikrocontroller.net/topic/525778?goto=7051413#7051413	2 years ago
lumapu	41b4f72b52	fix: doCalculations was not called	2 years ago
lumapu	71c83ac1fb	* version 0.3.0 * added unit test	2 years ago
lumapu	6a31bcddb1	* added HM800 defines * updated README.md	2 years ago
lumapu	b3bdf2811e	* fix: random crashes #15 -> don't use delay() on ESP while Wifi connection is established!?	2 years ago
lumapu	5c63503168	* fixed #13 , Inverter Type changed after reboot * fixed #11, WiFi password length limit increased to 63, check 802.11i spec: > A pass-phrase is a sequence of between 8 and 63 ASCII-encoded characters. The limit of 63 comes from the desire to distinguish between a pass-phrase and a PSK displayed as 64 hexadecimal characters.	2 years ago
lumapu	f6b75aff90	* preliminary state, compiles good not tested on hardware * converted struct inverter_t to class Inverter * started with calculation functions (idea from Hubi/mikrocontroller.net)	2 years ago
lumapu	a9b7fd0599	* added IP address to serial console on successful connect to station WiFi * fix: RF24 power setting configuration * added RF24 isChipConnected * added MQTT port configuration * fix offsets for HM400 and HM600 inverters * added warning if configuration was changed without reboot	2 years ago
lumapu	169bf8c7c8	* try to avoid exceptions, added yield * try to fix DNS problems	2 years ago
lumapu	04d31200cb	* NRF24 amlifierer power level can be configured in web setup * fixed MQTT status (was inverted) * fixed interval uint from seconds to ms	2 years ago
lumapu	df9f050313	* added erase application settings * HM1500 as selectable in setup * Added new commands to statistic (0x82, 0x83)	2 years ago
lumapu	a00ab4e48d	* fix eep endless loop	2 years ago
lumapu	d195eee498	* pinout can be saved using the web setup * html / css files are now located inside PROGMEM * conversion of files is done with python script (OS independent, open source) * moved as much as possible for now to the hm* modules - the app should only be the body * successfully tested with HM1200	2 years ago
lumapu	a95069e65c	* set default pinout to Wemos D1mini * pinout will be saved in eeprom, but changes not applied for now	2 years ago
lumapu	9e6cae26a7	* increased number of inverters * name, serial and type can be configured using setup.html	2 years ago
lumapu	97dfbb5936	* communication works again * reordered HM1200 values (for Serial print)	2 years ago
lumapu	d0731f7065	* new structure * slim definitions of fields and units * prepared multi inverter setup (not finished now)	2 years ago
lumapu	58d79beb8c	* send values using mqtt * only send command 0x80 to inverter, all replies 0x01, 0x02, 0x03 and 0x84 are received	2 years ago
lumapu	c00be7bb35	* added mqtt	2 years ago
lumapu	8bfbd8d45b	* added HM1200 decoder * added HTML to visualize the read values	2 years ago
lumapu	a7add69719	* renamed .ino (must be identical to parent folder name) * build CRC over settings, only if the CRC matches settings are applied * send command 0x80 (set time was wrong) * improved crc16 routine * added statistics for received commands and send statistics (channels are not correct for now!) * receive of commands 0x01, 0x02, 0x03, 0x81 and 0x84 working	3 years ago
lumapu	5f927ad8c5	added ESP8266 code	3 years ago

35 Commits (7844ea2946f40bef1d0bdf86b05e0cbc59ff163d)