Setup

ERASE SETTINGS (not WiFi)

Device Host Name Device Name

WiFi

Enter the credentials to your prefered WiFi station. After rebooting the device tries to connect with this information.

Search Networks
Avail Networks SSID Password

Static IP (optional)

Leave fields blank for DHCP
The following fields are parsed in this format: 192.168.1.1

IP Address Submask DNS 1 DNS 2 Gateway

Protection Admin Password

Select pages which should be protected by password

Inverter

General

Interval [s] Max retries per Payload

NTP Server NTP Server / IP NTP Port set system time

Sunrise & Sunset

Latitude and Longitude must be set to be stored! decimal separator: '.' (dot)

Latitude (decimal) Longitude (decimal) Offset (pre sunrise, post sunset)
disable night communication

MQTT Broker / Server IP Port Username (optional) Password (optional) Topic

Send Inverter data in a fixed interval, even if there is no change. A value of '0' disables the fixed interval. The data is published once it was successfully received from inverter. (default: 0)

Interval [s] Discovery Config (homeassistant)

System Config

Pinout (Wemos)

Radio (NRF24L01+)

Serial Console

print inverter data
Serial Debug
Interval [s]

Reboot device after successful save

Download your settings (JSON file) (only saved values)