{#HTML_HEADER} {#HTML_NAV}
Device Host Name
Device Name
Dark Mode
System Config

Pinout

Radio (NRF24L01+)

Serial Console

print inverter data
Serial Debug
Interval [s]
WiFi

Enter the credentials to your prefered WiFi station. After rebooting the device tries to connect with this information.

Search Networks
Avail Networks
SSID
Password
Static IP (optional)

Leave fields blank for DHCP
The following fields are parsed in this format: 192.168.4.1

IP Address
Submask
DNS 1
DNS 2
Gateway
Protection
Admin Password

Select pages which should be protected by password

Inverter

Note

A 'max module power' value of '0' disables the channel in 'live' view

General

Interval [s]
Max retries per Payload
Reset values and YieldDay at midnight
Reset values when inverter polling stops at sunset
Reset values when inverter status is 'not available'
NTP Server
NTP Server / IP
NTP Port
set system time
Sunrise & Sunset

Use a decimal separator: '.' (dot) for Latitude and Longitude

Latitude (decimal)
Longitude (decimal)
Offset (pre sunrise, post sunset)
Stop polling inverters during night
MQTT
Broker / Server IP
Port
Username (optional)
Password (optional)
Topic

Send Inverter data in a fixed interval, even if there is no change. A value of '0' disables the fixed interval. The data is published once it was successfully received from inverter. (default: 0)

Interval [s]
Discovery Config (homeassistant)
Display Config
Turn off while inverters are offline
Enable Screensaver (pixel shifting)
Contrast

Pinout

Reboot device after successful save
ERASE SETTINGS (not WiFi)
Upload / Store JSON Settings
Download settings (JSON file) (only saved values, passwords will be removed!)
{#HTML_FOOTER}