//-----------------------------------------------------------------------------
// 2022 Ahoy, https://www.mikrocontroller.net/topic/525778
// Creative Commons - http://creativecommons.org/licenses/by-nc-sa/3.0/de/
//-----------------------------------------------------------------------------

#ifndef __DEFINES_H__
#define __DEFINES_H__

#include "config.h"

//-------------------------------------
// PINOUT (Default, can be changed in setup)
//-------------------------------------
#define RF24_CS_PIN         15
#define RF24_CE_PIN         2
#define RF24_IRQ_PIN        0


//-------------------------------------
// VERSION
//-------------------------------------
#define VERSION_MAJOR       0
#define VERSION_MINOR       5
#define VERSION_PATCH       10


//-------------------------------------
typedef struct {
    uint8_t rxCh;
    uint8_t packet[MAX_RF_PAYLOAD_SIZE];
} packet_t;

typedef enum {
    InverterDevInform_Simple = 0,   // 0x00
    InverterDevInform_All = 1,      // 0x01
    //GridOnProFilePara = 2,        // 0x02
    //HardWareConfig = 3,           // 0x03
    //SimpleCalibrationPara = 4,    // 0x04
    //SystemConfigPara = 5,         // 0x05
    RealTimeRunData_Debug = 11,     // 0x0b
    //RealTimeRunData_Reality = 12, // 0x0c
    //RealTimeRunData_A_Phase = 13, // 0x0d
    //RealTimeRunData_B_Phase = 14, // 0x0e
    //RealTimeRunData_C_Phase = 15, // 0x0f
    AlarmData = 17,                 // 0x11, Alarm data - all unsent alarms
    AlarmUpdate = 18,               // 0x12, Alarm data - all pending alarms
    //RecordData = 19,              // 0x13
    //InternalData = 20,            // 0x14
    GetLossRate = 21,               // 0x15
    //GetSelfCheckState = 30,       // 0x1e
    //InitDataState = 0xff
} InfoCmdType;

typedef enum {
    TurnOn = 0,                   // 0x00
    TurnOff = 1,                  // 0x01
    Restart = 2,                  // 0x02
    Lock = 3,                     // 0x03
    Unlock = 4,                   // 0x04
    ActivePowerContr = 11,        // 0x0b
    ReactivePowerContr = 12,      // 0x0c
    PFSet = 13,                   // 0x0d
    CleanState_LockAndAlarm = 20, // 0x14
    SelfInspection = 40,          // 0x28, self-inspection of grid-connected protection files
    Init = 0xff
} DevControlCmdType;

// minimum serial interval
#define MIN_SERIAL_INTERVAL     5

// minimum send interval
#define MIN_SEND_INTERVAL       15

// minimum mqtt interval
#define MIN_MQTT_INTERVAL       60

//-------------------------------------
// EEPROM
//-------------------------------------
#define SSID_LEN                32
#define PWD_LEN                 64
#define DEVNAME_LEN             16
#define CRC_LEN                 2 // uint16_t

#define INV_ADDR_LEN            MAX_NUM_INVERTERS * 8                   // uint64_t
#define INV_NAME_LEN            MAX_NUM_INVERTERS * MAX_NAME_LENGTH     // char[]
#define INV_CH_CH_PWR_LEN       MAX_NUM_INVERTERS * 2 * 4               // uint16_t (4 channels)
#define INV_CH_CH_NAME_LEN      MAX_NUM_INVERTERS * MAX_NAME_LENGTH * 4 // (4 channels)
#define INV_INTERVAL_LEN        2                                       // uint16_t
#define INV_MAX_RTRY_LEN        1                                       // uint8_t
#define INV_PWR_LIM_LEN         MAX_NUM_INVERTERS * 2                   // uint16_t

#define PINOUT_LEN              3 // 3 pins: CS, CE, IRQ

#define RF24_AMP_PWR_LEN        1

#define NTP_ADDR_LEN            32 // DNS Name
#define NTP_PORT_LEN            2 // uint16_t

#define MQTT_ADDR_LEN           32 // DNS Name
#define MQTT_USER_LEN           16
#define MQTT_PWD_LEN            32
#define MQTT_TOPIC_LEN          32
#define MQTT_INTERVAL_LEN       2 // uint16_t
#define MQTT_PORT_LEN           2 // uint16_t
#define MQTT_DISCOVERY_PREFIX   "homeassistant"
#define MQTT_MAX_PACKET_SIZE    384

#define SER_ENABLE_LEN          1 // uint8_t
#define SER_DEBUG_LEN           1 // uint8_t
#define SER_INTERVAL_LEN        2 // uint16_t


#define ADDR_START              0
#define ADDR_SSID               ADDR_START
#define ADDR_PWD                ADDR_SSID          + SSID_LEN
#define ADDR_DEVNAME            ADDR_PWD           + PWD_LEN
#define ADDR_WIFI_CRC           ADDR_DEVNAME       + DEVNAME_LEN
#define ADDR_START_SETTINGS     ADDR_WIFI_CRC      + CRC_LEN

#define ADDR_PINOUT             ADDR_START_SETTINGS

#define ADDR_RF24_AMP_PWR       ADDR_PINOUT        + PINOUT_LEN

#define ADDR_INV_ADDR           ADDR_RF24_AMP_PWR  + RF24_AMP_PWR_LEN
#define ADDR_INV_NAME           ADDR_INV_ADDR      + INV_ADDR_LEN
#define ADDR_INV_CH_PWR         ADDR_INV_NAME      + INV_NAME_LEN
#define ADDR_INV_CH_NAME        ADDR_INV_CH_PWR    + INV_CH_CH_PWR_LEN
#define ADDR_INV_INTERVAL       ADDR_INV_CH_NAME   + INV_CH_CH_NAME_LEN
#define ADDR_INV_MAX_RTRY       ADDR_INV_INTERVAL  + INV_INTERVAL_LEN
#define ADDR_INV_PWR_LIM        ADDR_INV_MAX_RTRY  + INV_MAX_RTRY_LEN

#define ADDR_NTP_ADDR           ADDR_INV_PWR_LIM   + INV_PWR_LIM_LEN //Bugfix #125
#define ADDR_NTP_PORT           ADDR_NTP_ADDR      + NTP_ADDR_LEN

#define ADDR_MQTT_ADDR          ADDR_NTP_PORT      + NTP_PORT_LEN
#define ADDR_MQTT_USER          ADDR_MQTT_ADDR     + MQTT_ADDR_LEN
#define ADDR_MQTT_PWD           ADDR_MQTT_USER     + MQTT_USER_LEN
#define ADDR_MQTT_TOPIC         ADDR_MQTT_PWD      + MQTT_PWD_LEN
#define ADDR_MQTT_INTERVAL      ADDR_MQTT_TOPIC    + MQTT_TOPIC_LEN
#define ADDR_MQTT_PORT          ADDR_MQTT_INTERVAL + MQTT_INTERVAL_LEN

#define ADDR_SER_ENABLE         ADDR_MQTT_PORT     + MQTT_PORT_LEN
#define ADDR_SER_DEBUG          ADDR_SER_ENABLE    + SER_ENABLE_LEN
#define ADDR_SER_INTERVAL       ADDR_SER_DEBUG     + SER_DEBUG_LEN
#define ADDR_NEXT               ADDR_SER_INTERVAL  + SER_INTERVAL_LEN

// #define ADDR_SETTINGS_CRC   950
#define ADDR_SETTINGS_CRC       ADDR_NEXT + 2

#if(ADDR_SETTINGS_CRC <= ADDR_NEXT)
#pragma error "address overlap! (ADDR_SETTINGS_CRC="+ ADDR_SETTINGS_CRC +", ADDR_NEXT="+ ADDR_NEXT +")" 
#endif

#if(ADDR_SETTINGS_CRC >= 4096 - CRC_LEN)
#pragma error "EEPROM size exceeded! (ADDR_SETTINGS_CRC="+ ADDR_SETTINGS_CRC +", CRC_LEN="+ CRC_LEN +")" 
#pragma error "Configure less inverters? (MAX_NUM_INVERTERS=" + MAX_NUM_INVERTERS +")" 
#endif

#endif /*__DEFINES_H__*/