mirror of https://github.com/lumapu/ahoy.git
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1.8 KiB
1.8 KiB
| name | about | title | labels | assignees |
|---|---|---|---|---|
| Report Ahoy | question about Ahoy |
Hardware
- ESP8266
- ESP32
- Raspberry Pi
Modelname: ______ Retailer URL: ______
nRF24L01+ Module
- nRF24L01+ you verified this is a Plus model capable of the required 256kBit/s mode
- square dot indicates original Nordic Semicon chip
- round dot indicates copy-cat / counterfeit SI labs chip
Antenna:
- circuit board
- external antenna
Power Stabilization:
- 100uF Electrolytic Capacitor connected between +3.3V and GND (Pin 1 & 2) of the NRF Module
- Voltage stabilizing motherboard
Connection diagram:
- Image of the your wiring attached
Connection diagram I used:
| nRF24L01+ Pin | ESP8266 GPIO |
|---|---|
| Pin 1 GND [*] | GND |
| Pin 2 +3.3V | +3.3V |
| Pin 3 CE | GPIO2 CE D4 |
| Pin 4 CSN | GPIO15 CS D8 |
| Pin 5 SCK | GPIO14 SCLK D5 |
| Pin 6 MOSI | GPIO13 MOSI D7 |
| Pin 7 MISO | GPIO12 MISO D6 |
| Pin 8 IRQ | GPIO0 IRQ D3 |
| nRF24L01+ Pin | ESP32 GPIO |
|---|---|
| Pin 1 GND [*] | GND |
| Pin 2 +3.3V | +3.3V |
| Pin 3 CE | GPIO4 CE D4 |
| Pin 4 CSN | GPIO5 CS D5 |
| Pin 5 SCK | GPIO18 SCLK D18 |
| Pin 6 MOSI | GPIO23 MOSI D23 |
| Pin 7 MISO | GPIO19 MISO D19 |
| Pin 8 IRQ | GPIO0 IRQ D0 |
Note: [*] GND Pin 1 has a square mark on the nRF24L01+ module
Software
- AhoyDTU
- OpenDTU
Version / Git SHA:
Version: ..__ Github Hash: _______
Build & Flash Method:
- Arduino
- ESP Tools
- Platform IO
Desktop OS:
- Linux
- Windows
- Mac OS
Debugging:
- USB Serial Log (attached)
- Setup settings (use our templates ... to be added)