From 1d8158ae37abd429df9b00ee9b77b6667b7f2f47 Mon Sep 17 00:00:00 2001 From: vanhofen <vanhofen@gmx.de> Date: Mon, 15 Jun 2020 16:52:53 +0200 Subject: [PATCH] strip graphlcd.conf --- graphlcd.conf | 553 +------------------------------------------------- 1 file changed, 3 insertions(+), 550 deletions(-) diff --git a/graphlcd.conf b/graphlcd.conf index becdd54..4b59fc2 100644 --- a/graphlcd.conf +++ b/graphlcd.conf @@ -29,7 +29,7 @@ WaitMethod=3 # Select the process priority that is used when sleeping. # Possible values: -20 <= x <= 19 # Default value: 0 -WaitPriority=0 +WaitPriority=19 # General driver settings # This section lists the display settings that are parsed and @@ -117,487 +117,6 @@ WaitPriority=0 ######################################################################## -[framebuffer] -# framebuffer driver -# Output goes to a framebuffer device -Driver=framebuffer - -#UpsideDown=no -#Invert=no - -# Device -# Framebuffer device -# Default value: /dev/fb0 -#Device=/dev/fb0 - -# Damage | ReportDamage -# Damage reporting for framebuffer devices with update problems -# Possible values: none, auto, udlfb, ugly -# none: no damage reporting -# auto: automatic determination if damage reporting is needed -# udlfb: damage reporting for udlfb-devices (displaylink) -# ugly: dirty damagereporting (a '\n' is written to the framebuffer file handle) -# Default value: none -#Damage=none - -# Zoom -# Determines if pixels should be drawn double sized. -# If zoom is set, the actual resolution will be halved (both width and height) -# e.g.: framebuffer has resolution 800x600: this driver will report a drawing area of 400x300 -# Possible values: 0, 1 -# Default value: 1 -Zoom=1 - -######################################################################## - -[gu140x32f] -# gu140x32f driver -# This is an 8-bit driver module for Noritake GU140x32-F7806 VFD -# displays. The VFD is operating in it's 8 bit-mode connected to a -# single PC parallel port. -# Default size: 140 x 32 -Driver=gu140x32f - -Device=/dev/parport0 -#Port=0x378 -#Width=140 -#Height=32 -#UpsideDown=no -#Invert=no -#Brightness=100 -#AdjustTiming=0 -#RefreshDisplay=1 - -# Wiring -# Select the type of wiring your display is connected with. -# Possible values: 'Standard', 'Windows' -# Default value: 'Standard' -Wiring=Standard - -######################################################################## - -[gu256x64-372] -# gu256x64-372 driver -# This is an 8-bit driver module for Noritake GU256x64-372 VFD -# displays. The VFD is operating in it's 8 bit-mode connected to a -# single PC parallel port. -# Default size: 256 x 64 -Driver=gu256x64-372 - -Device=/dev/parport0 -#Port=0x378 -#Width=256 -#Height=64 -#UpsideDown=no -#Invert=no -#Brightness=100 -#AdjustTiming=0 -#RefreshDisplay=1 - -# Wiring -# Select the type of wiring your display is connected with. -# Possible values: 'Standard', 'Windows' -# Default value: 'Standard' -Wiring=Standard - -######################################################################## - -[gu256x64-3900] -# gu256x64-3900 driver -# This is a driver module for Noritake GU256X64x-3900 VFD displays. The -# VFD is either operating in 8 bit-mode connected to a single PC -# parallel port or in serial mode connected to a single PC serial port. -# Default size: 256 x 64 -Driver=gu256x64-3900 - -Device=/dev/parport0 -#Port=0x378 -#Width=256 -#Height=64 -#UpsideDown=no -#Invert=no -#Brightness=100 -#AdjustTiming=0 -#RefreshDisplay=1 - -# Wiring -# Select the type of wiring your display is connected with. -# Possible values: 'Standard', 'Satyr' -# Default value: 'Standard' -Wiring=Standard - -# Interface -# Select the interface your display is connnected to. -# Possible values: 'Parallel', 'Serial' -# Default value: 'Parallel' -Interface=Parallel - -# DMA -# Enables/disables the usage of the controller's DMA mode which -# increases writing speed. This only works in parallel interface mode. -# Possible values: 'yes', 'no' -# Default value: 'yes' -DMA=yes - -######################################################################## - -[gu126x64D-K610A4] -# GU126x64D-K610A4 driver -# This is a driver module for Noritake GU126x64D-K610A4 VFD displays. -# The VFD is operating in 8 bit-mode connected to a single PC -# parallel port. -# Default size: 126 x 64 -Driver=gu126x64D-K610A4 - -Device=/dev/parport0 -#Port=0x378 -#Width=126 -#Height=64 -#UpsideDown=no -#Invert=no -#Brightness=100 -#RefreshDisplay=1 -#AdjustTiming=30 - -# Debug some methods of the driver -# (add the values of interest) -# -# 1: show a log at the start of a refresh -# 2: show a log at the end of a refresh with timing information -# 4: show the rows (8 pixel) refreshed -# 8: show every commands/bytes sent to the display -# 16: log every unsuccessful waiting for display acknowledge -# -#Debug=0 - -######################################################################## - -[hd61830] -# hd61830 driver -# This is a driver module for the Hitachi HD61830 LCD controller. -# Default size: 240 x 128 -Driver=hd61830 - -Device=/dev/parport0 -#Port=0x378 -#Width=240 -#Height=128 -#UpsideDown=no -#Invert=no -#AdjustTiming=0 -#RefreshDisplay=1 - -######################################################################## - -[image] -# image driver -# This is a driver module for writing image sequences in PBM (Portable -# Bit Map) format that show the plugin's output. -# Default size: 240 x 128 -Driver=image -#Width=240 -#Height=128 -#UpsideDown=no -#Invert=no - -######################################################################## - -[ks0108] -# ks0108 driver -# This is a driver module for the Samsung KS0108 LCD controller. -# Default size: 128 x 64 -Driver=ks0108 - -Device=/dev/parport0 -#Port=0x378 -Width=128 -#Width=192 -#Height=64 -#UpsideDown=no -#Invert=no -#AdjustTiming=0 -#RefreshDisplay=1 - -# Control -# Select the variant of triggering the display's control lines. -# Possible values: '0', '1' -# Default value: '1' -Control=1 - -######################################################################## - -[sed1330] -# sed1330 driver -# This is a driver module for the Epson SED1330/1335 LCD controller. -# Default size: 320 x 240 -Driver=sed1330 - -Device=/dev/parport0 -#Port=0x378 -#Width=320 -#Height=240 -#UpsideDown=no -#Invert=no -#AdjustTiming=0 -#refreshDisplay=1 - -# Wiring -# Select the type of wiring your display is connected with. -# Possible values: 'Original', 'PowerLCD', 'LCDProc', 'Tweakers', -# 'YASEDW' -# Default value: 'Original' -Wiring=Original - -# OscillatorFrequency -# Select the frequency the oscillator on your LCD board uses in kHz. -# Possible values: 1000 <= x <= 15000) -# Default value: 9600 -OscillatorFrequency=9600 - -# Interface -# Select the interface mode your display is connected with. -# Possible values: '6800', '8080' -# Default value: '6800' -Interface=6800 - -######################################################################## - -[sed1520] -# sed1520 driver -# This is a driver module for the Epson SED1520 LCD controller. -# Default size: 120 x 32 -Driver=sed1520 - -Device=/dev/parport0 -#Port=0x378 -#Width=120 -#Height=32 -#UpsideDown=no -#Invert=no -#AdjustTiming=0 -#RefreshDisplay=1 - -######################################################################## - -[simlcd] -# simlcd driver -# This is the SimLCD driver module. Output goes to a file instead of -# LCD. Use SimLCD tool to view this file. -# Default size: 240 x 128 -Driver=simlcd -#Width=240 -#Height=128 -#UpsideDown=no -#Invert=no - -######################################################################## - -[t6963c] -# t6963c driver -# This is a driver module for the Toshiba T6963C LCD controller. -# Default size: 240 x 128 -Driver=t6963c - -Device=/dev/parport0 -#Port=0x378 -#Width=240 -#Height=128 -#UpsideDown=no -#Invert=no -#RefreshDisplay=1 - -# Wiring -# Select the type of wiring your display is connected with. -# Possible values: 'Standard', 'Windows', 'Serial' -# Default value: 'Standard' -Wiring=Standard - -# FontSelect -# Select the font width your display uses for text mode. In most cases -# this is selectable through one of the pins of your LCD board -# Possible values: '6', '8' -# Default value: '6' -FontSelect=6 - -# AutoMode -# Enables or disables the usage of T6963C's auto mode which doubles -# writing speed when enabled. -# Possible values: 'yes', 'no' -# Default value: 'yes' -AutoMode=yes - -# StatusCheck -# Enables or disables the usage of T6963C's status check. When using a -# shielded cable for connecting your display, the disabling may be -# possible. This results in doubling the speed of writing data to the -# LCD. -# Possible values: 'yes', 'no' -# Default value: 'yes' -StatusCheck=yes - -######################################################################## - -[serdisp] -Driver=serdisp -# Controller -# Select the serdisplib name of your display. -# Possible values: See README in serdisplib package or http://serdisplib.sourceforge.net -#Controller=nokia7110 -#Controller=sed1335 -Controller=optrex323 -#Controller=l4m132c -#Controller=l4m320t - -# Options -# Pass display specific options -# Possible values: See driver-specific hardware page at http://serdisplib.sourceforge.net -# -# IMPORTANT: when using generic controllers like sed1330,sed1335,t6963c, width and height -# need to be set here (if different from default settings)! -# (serdisplib needs to be extended to be able to use 'Width' and 'Height' -# settings directly - this will be added later) -# -#Options=MODE=8080 -#Options=DELAY=2000;FONTWIDTH=8;CHECK=1 -#Options=WIDTH=128;HEIGHT=64 -#Options=WIDTH=128;HEIGHT=64;DELAY=2000;FONTWIDTH=8;CHECK=1 - -# Wiring -# Select Wiring -# Possible values: See driver-specific hardware page at http://serdisplib.sourceforge.net -#Wiring=1 -#Wiring=PowerLCD -#Wiring=DATA8,CS:nAUTO,A0:INIT,WR:nSTRB,RD:nSELIN - -# FGColour -# Drawing colour for non-monochrome displays -# Possible values: 0xRRGGBB (eg.: 0xFF0000) -# Defaults to black (0x000000) if not set -#FGColour=0x000000 - -# BGColour -# Background colour for non-monochrome displays -# Possible values: 0xRRGGBB (eg.: 0x00FFFF) -# Defaults to white (0xFFFFFF) if not set -#BGColour=0xFFFFFF - -Device=/dev/parport0 -#Port=0x378 -#Device=HID:/dev/usb/hiddev0 -#Device=HID:/dev/hiddev0 -#Device=USB:USB:4243/ee20 # Linux4Media 320T TouchLCD -#UpsideDown=no -#Invert=no -Contrast=5 -Backlight=yes - -# Settings 'Width' and 'Height' are ignored at the moment. For generic controllers # (sed1330/1335, t6963) width and height need to be set using setting 'Options' (look above) -##Width=240 -##Height=128 - -######################################################################## - -[noritake800] -# noritake800 driver -# This is an 8-bit driver module for Noritake Noritake 800(A) series VFD -# displays. The VFD is operating in it's 8 bit-mode connected to a -# single PC parallel port. -# Default size: 128 x 64 -Driver=noritake800 - -Device=/dev/parport0 -#Port=0x378 -Width=128 -Height=64 -#UpsideDown=no -#Invert=no -Brightness=50 -AdjustTiming=50 -RefreshDisplay=50 - -# Wiring -# Select the type of wiring your display is connected with. -# Possible values: 'LiquidMp3', 'MZ' -# Default value: 'LiquidMp3' -Wiring=LiquidMp3 - -######################################################################## - -[avrctl] -# avrctl driver -# This is an driver module for my AVR controlled LCD display connected via -# USB port. It uses some simple commands to update the display content. -# Default size: 256 x 128 -Driver=avrctl -Device=/dev/ttyUSB0 -Width=256 -Height=128 -#UpsideDown=no -#Invert=no -Brightness=50 -RefreshDisplay=1 - -######################################################################## - -[g15daemon] -# pseudo device for the g15daemon meta driver -# Output goes to the g15daemon which then displays it -Driver=g15daemon -Width=160 -Height=43 - -######################################################################## - -[network] -# network driver -# Default size: 240 x 128 -Driver=network -Width=256 -Height=128 -UpsideDown=no -Invert=no -Brightness=10 -RefreshDisplay=1 - -######################################################################## - -[dm140gink] -# dm140gink driver -# This is an driver module for Futaba DM140-GINK VFD displays. -# The VFD is built-in in some HTPC cases and connected to a -# USB port. -# Default size: 112 x 16 -Driver=dm140gink -#Width=112 -#Height=16 -#UpsideDown=no - -# Invertion is not supported -#Invert=no - -# USB VendorID and ProductID -#Vendor=0x040b -#Product=0x7001 -# USB ID activy 5xx: -#Vendor=0x1509 -#Product=0x925d -######################################################################## - -[futabaMDM166A] -# futabaMDM166A driver -# This is an driver module for Futaba MDM166A VFD displays. -# The VFD is built-in in Targa HTPC cases and connected to USB port. -# Default size: 96 x 16 -Driver=futabaMDM166A - -#Width=96 -#Height=16 -#UpsideDown=no -#Invert=no -#Brightness=50 -#RefreshDisplay=1000 -######################################################################## - [ax206dpf] # THIS IS AN EXPERIMENTAL DRIVER! # You have to uncomment the variable HAVE_DRIVER_AX206DPF @@ -609,8 +128,8 @@ Driver=futabaMDM166A # # Default size: 320 x 240 or 240 x 320 (see "Portrait") Driver=ax206dpf -#Width=320 -#Height=240 +Width=320 +Height=240 # # UpsideDown # Rotates the display output by 180 degrees. This might be useful, if @@ -668,69 +187,3 @@ Driver=ax206dpf # Default value: 'nnnn' #Flip=nnnn # - -######################################################################## - -[vncserver] -# vncserver driver -# Output goes to a vncserver device -# Default size: 320 x 240 -Driver=vncserver -Width=320 -Height=240 -# -# HttpDir -# Webclients directory of libvncserver installation (only needed for webclient access) -#HttpDir=/usr/share/webclients - -######################################################################## - -[ssd1306] -# ssd1306 driver -# This is a driver module for the SSD1306 OLED display controller. -# Default size: 128 x 64 -Driver=ssd1306 -Device=0 -Width=128 -Height=64 - -[ili9341] -# ili9341 driver -# This is a driver module for the ILI9341 TFT display controller. -# Default size: 320x240 -Driver=ili9341 -Device=0 -Width=320 -Height=240 - -[alphacool] -# Driver setting for the Alphacool USB LCD (240x128 pixels) -# Requires serdisplib to be installed -Driver=serdisp -Controller=alphacool -Device=USB:060c/04eb -Backlight=yes - -[sdcmegtron] -# Driver setting for the SDC Megtron USB LCD (240x128 pixels) -# Requires serdisplib to be installed -Driver=serdisp -Controller=sdcmegtron -Device=USB:152a/8380 -Backlight=yes - -[usbserlcd] -# This is the driver for displays based on the USBserLCD firmware: -# https://github.com/M-Reimer/usbserlcd -Driver=usbserlcd -Device=/dev/ttyUSB0 -RefreshDisplay=0 - -[st7565r-reel] -# st7565r driver -# This is a driver module for the ST7565R based Reelbox frontpanel LCD -# Default size: 128 x 64 -Driver=st7565r-reel -Device=/dev/ttyS0 -Brightness=100 -Contrast=80 -- 2.20.1