You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
594 lines
15 KiB
594 lines
15 KiB
From 1d8158ae37abd429df9b00ee9b77b6667b7f2f47 Mon Sep 17 00:00:00 2001
|
|
From: vanhofen <vanhofen@gmx.de>
|
|
Date: Mon, 15 Jun 2020 16:52:53 +0200
|
|
Subject: [PATCH] strip graphlcd.conf
|
|
|
|
---
|
|
graphlcd.conf | 553 +-------------------------------------------------
|
|
1 file changed, 3 insertions(+), 550 deletions(-)
|
|
|
|
diff --git a/graphlcd.conf b/graphlcd.conf
|
|
index becdd54..4b59fc2 100644
|
|
--- a/graphlcd.conf
|
|
+++ b/graphlcd.conf
|
|
@@ -29,7 +29,7 @@ WaitMethod=3
|
|
# Select the process priority that is used when sleeping.
|
|
# Possible values: -20 <= x <= 19
|
|
# Default value: 0
|
|
-WaitPriority=0
|
|
+WaitPriority=19
|
|
|
|
# General driver settings
|
|
# This section lists the display settings that are parsed and
|
|
@@ -117,487 +117,6 @@ WaitPriority=0
|
|
|
|
########################################################################
|
|
|
|
-[framebuffer]
|
|
-# framebuffer driver
|
|
-# Output goes to a framebuffer device
|
|
-Driver=framebuffer
|
|
-
|
|
-#UpsideDown=no
|
|
-#Invert=no
|
|
-
|
|
-# Device
|
|
-# Framebuffer device
|
|
-# Default value: /dev/fb0
|
|
-#Device=/dev/fb0
|
|
-
|
|
-# Damage | ReportDamage
|
|
-# Damage reporting for framebuffer devices with update problems
|
|
-# Possible values: none, auto, udlfb, ugly
|
|
-# none: no damage reporting
|
|
-# auto: automatic determination if damage reporting is needed
|
|
-# udlfb: damage reporting for udlfb-devices (displaylink)
|
|
-# ugly: dirty damagereporting (a '\n' is written to the framebuffer file handle)
|
|
-# Default value: none
|
|
-#Damage=none
|
|
-
|
|
-# Zoom
|
|
-# Determines if pixels should be drawn double sized.
|
|
-# If zoom is set, the actual resolution will be halved (both width and height)
|
|
-# e.g.: framebuffer has resolution 800x600: this driver will report a drawing area of 400x300
|
|
-# Possible values: 0, 1
|
|
-# Default value: 1
|
|
-Zoom=1
|
|
-
|
|
-########################################################################
|
|
-
|
|
-[gu140x32f]
|
|
-# gu140x32f driver
|
|
-# This is an 8-bit driver module for Noritake GU140x32-F7806 VFD
|
|
-# displays. The VFD is operating in it's 8 bit-mode connected to a
|
|
-# single PC parallel port.
|
|
-# Default size: 140 x 32
|
|
-Driver=gu140x32f
|
|
-
|
|
-Device=/dev/parport0
|
|
-#Port=0x378
|
|
-#Width=140
|
|
-#Height=32
|
|
-#UpsideDown=no
|
|
-#Invert=no
|
|
-#Brightness=100
|
|
-#AdjustTiming=0
|
|
-#RefreshDisplay=1
|
|
-
|
|
-# Wiring
|
|
-# Select the type of wiring your display is connected with.
|
|
-# Possible values: 'Standard', 'Windows'
|
|
-# Default value: 'Standard'
|
|
-Wiring=Standard
|
|
-
|
|
-########################################################################
|
|
-
|
|
-[gu256x64-372]
|
|
-# gu256x64-372 driver
|
|
-# This is an 8-bit driver module for Noritake GU256x64-372 VFD
|
|
-# displays. The VFD is operating in it's 8 bit-mode connected to a
|
|
-# single PC parallel port.
|
|
-# Default size: 256 x 64
|
|
-Driver=gu256x64-372
|
|
-
|
|
-Device=/dev/parport0
|
|
-#Port=0x378
|
|
-#Width=256
|
|
-#Height=64
|
|
-#UpsideDown=no
|
|
-#Invert=no
|
|
-#Brightness=100
|
|
-#AdjustTiming=0
|
|
-#RefreshDisplay=1
|
|
-
|
|
-# Wiring
|
|
-# Select the type of wiring your display is connected with.
|
|
-# Possible values: 'Standard', 'Windows'
|
|
-# Default value: 'Standard'
|
|
-Wiring=Standard
|
|
-
|
|
-########################################################################
|
|
-
|
|
-[gu256x64-3900]
|
|
-# gu256x64-3900 driver
|
|
-# This is a driver module for Noritake GU256X64x-3900 VFD displays. The
|
|
-# VFD is either operating in 8 bit-mode connected to a single PC
|
|
-# parallel port or in serial mode connected to a single PC serial port.
|
|
-# Default size: 256 x 64
|
|
-Driver=gu256x64-3900
|
|
-
|
|
-Device=/dev/parport0
|
|
-#Port=0x378
|
|
-#Width=256
|
|
-#Height=64
|
|
-#UpsideDown=no
|
|
-#Invert=no
|
|
-#Brightness=100
|
|
-#AdjustTiming=0
|
|
-#RefreshDisplay=1
|
|
-
|
|
-# Wiring
|
|
-# Select the type of wiring your display is connected with.
|
|
-# Possible values: 'Standard', 'Satyr'
|
|
-# Default value: 'Standard'
|
|
-Wiring=Standard
|
|
-
|
|
-# Interface
|
|
-# Select the interface your display is connnected to.
|
|
-# Possible values: 'Parallel', 'Serial'
|
|
-# Default value: 'Parallel'
|
|
-Interface=Parallel
|
|
-
|
|
-# DMA
|
|
-# Enables/disables the usage of the controller's DMA mode which
|
|
-# increases writing speed. This only works in parallel interface mode.
|
|
-# Possible values: 'yes', 'no'
|
|
-# Default value: 'yes'
|
|
-DMA=yes
|
|
-
|
|
-########################################################################
|
|
-
|
|
-[gu126x64D-K610A4]
|
|
-# GU126x64D-K610A4 driver
|
|
-# This is a driver module for Noritake GU126x64D-K610A4 VFD displays.
|
|
-# The VFD is operating in 8 bit-mode connected to a single PC
|
|
-# parallel port.
|
|
-# Default size: 126 x 64
|
|
-Driver=gu126x64D-K610A4
|
|
-
|
|
-Device=/dev/parport0
|
|
-#Port=0x378
|
|
-#Width=126
|
|
-#Height=64
|
|
-#UpsideDown=no
|
|
-#Invert=no
|
|
-#Brightness=100
|
|
-#RefreshDisplay=1
|
|
-#AdjustTiming=30
|
|
-
|
|
-# Debug some methods of the driver
|
|
-# (add the values of interest)
|
|
-#
|
|
-# 1: show a log at the start of a refresh
|
|
-# 2: show a log at the end of a refresh with timing information
|
|
-# 4: show the rows (8 pixel) refreshed
|
|
-# 8: show every commands/bytes sent to the display
|
|
-# 16: log every unsuccessful waiting for display acknowledge
|
|
-#
|
|
-#Debug=0
|
|
-
|
|
-########################################################################
|
|
-
|
|
-[hd61830]
|
|
-# hd61830 driver
|
|
-# This is a driver module for the Hitachi HD61830 LCD controller.
|
|
-# Default size: 240 x 128
|
|
-Driver=hd61830
|
|
-
|
|
-Device=/dev/parport0
|
|
-#Port=0x378
|
|
-#Width=240
|
|
-#Height=128
|
|
-#UpsideDown=no
|
|
-#Invert=no
|
|
-#AdjustTiming=0
|
|
-#RefreshDisplay=1
|
|
-
|
|
-########################################################################
|
|
-
|
|
-[image]
|
|
-# image driver
|
|
-# This is a driver module for writing image sequences in PBM (Portable
|
|
-# Bit Map) format that show the plugin's output.
|
|
-# Default size: 240 x 128
|
|
-Driver=image
|
|
-#Width=240
|
|
-#Height=128
|
|
-#UpsideDown=no
|
|
-#Invert=no
|
|
-
|
|
-########################################################################
|
|
-
|
|
-[ks0108]
|
|
-# ks0108 driver
|
|
-# This is a driver module for the Samsung KS0108 LCD controller.
|
|
-# Default size: 128 x 64
|
|
-Driver=ks0108
|
|
-
|
|
-Device=/dev/parport0
|
|
-#Port=0x378
|
|
-Width=128
|
|
-#Width=192
|
|
-#Height=64
|
|
-#UpsideDown=no
|
|
-#Invert=no
|
|
-#AdjustTiming=0
|
|
-#RefreshDisplay=1
|
|
-
|
|
-# Control
|
|
-# Select the variant of triggering the display's control lines.
|
|
-# Possible values: '0', '1'
|
|
-# Default value: '1'
|
|
-Control=1
|
|
-
|
|
-########################################################################
|
|
-
|
|
-[sed1330]
|
|
-# sed1330 driver
|
|
-# This is a driver module for the Epson SED1330/1335 LCD controller.
|
|
-# Default size: 320 x 240
|
|
-Driver=sed1330
|
|
-
|
|
-Device=/dev/parport0
|
|
-#Port=0x378
|
|
-#Width=320
|
|
-#Height=240
|
|
-#UpsideDown=no
|
|
-#Invert=no
|
|
-#AdjustTiming=0
|
|
-#refreshDisplay=1
|
|
-
|
|
-# Wiring
|
|
-# Select the type of wiring your display is connected with.
|
|
-# Possible values: 'Original', 'PowerLCD', 'LCDProc', 'Tweakers',
|
|
-# 'YASEDW'
|
|
-# Default value: 'Original'
|
|
-Wiring=Original
|
|
-
|
|
-# OscillatorFrequency
|
|
-# Select the frequency the oscillator on your LCD board uses in kHz.
|
|
-# Possible values: 1000 <= x <= 15000)
|
|
-# Default value: 9600
|
|
-OscillatorFrequency=9600
|
|
-
|
|
-# Interface
|
|
-# Select the interface mode your display is connected with.
|
|
-# Possible values: '6800', '8080'
|
|
-# Default value: '6800'
|
|
-Interface=6800
|
|
-
|
|
-########################################################################
|
|
-
|
|
-[sed1520]
|
|
-# sed1520 driver
|
|
-# This is a driver module for the Epson SED1520 LCD controller.
|
|
-# Default size: 120 x 32
|
|
-Driver=sed1520
|
|
-
|
|
-Device=/dev/parport0
|
|
-#Port=0x378
|
|
-#Width=120
|
|
-#Height=32
|
|
-#UpsideDown=no
|
|
-#Invert=no
|
|
-#AdjustTiming=0
|
|
-#RefreshDisplay=1
|
|
-
|
|
-########################################################################
|
|
-
|
|
-[simlcd]
|
|
-# simlcd driver
|
|
-# This is the SimLCD driver module. Output goes to a file instead of
|
|
-# LCD. Use SimLCD tool to view this file.
|
|
-# Default size: 240 x 128
|
|
-Driver=simlcd
|
|
-#Width=240
|
|
-#Height=128
|
|
-#UpsideDown=no
|
|
-#Invert=no
|
|
-
|
|
-########################################################################
|
|
-
|
|
-[t6963c]
|
|
-# t6963c driver
|
|
-# This is a driver module for the Toshiba T6963C LCD controller.
|
|
-# Default size: 240 x 128
|
|
-Driver=t6963c
|
|
-
|
|
-Device=/dev/parport0
|
|
-#Port=0x378
|
|
-#Width=240
|
|
-#Height=128
|
|
-#UpsideDown=no
|
|
-#Invert=no
|
|
-#RefreshDisplay=1
|
|
-
|
|
-# Wiring
|
|
-# Select the type of wiring your display is connected with.
|
|
-# Possible values: 'Standard', 'Windows', 'Serial'
|
|
-# Default value: 'Standard'
|
|
-Wiring=Standard
|
|
-
|
|
-# FontSelect
|
|
-# Select the font width your display uses for text mode. In most cases
|
|
-# this is selectable through one of the pins of your LCD board
|
|
-# Possible values: '6', '8'
|
|
-# Default value: '6'
|
|
-FontSelect=6
|
|
-
|
|
-# AutoMode
|
|
-# Enables or disables the usage of T6963C's auto mode which doubles
|
|
-# writing speed when enabled.
|
|
-# Possible values: 'yes', 'no'
|
|
-# Default value: 'yes'
|
|
-AutoMode=yes
|
|
-
|
|
-# StatusCheck
|
|
-# Enables or disables the usage of T6963C's status check. When using a
|
|
-# shielded cable for connecting your display, the disabling may be
|
|
-# possible. This results in doubling the speed of writing data to the
|
|
-# LCD.
|
|
-# Possible values: 'yes', 'no'
|
|
-# Default value: 'yes'
|
|
-StatusCheck=yes
|
|
-
|
|
-########################################################################
|
|
-
|
|
-[serdisp]
|
|
-Driver=serdisp
|
|
-# Controller
|
|
-# Select the serdisplib name of your display.
|
|
-# Possible values: See README in serdisplib package or http://serdisplib.sourceforge.net
|
|
-#Controller=nokia7110
|
|
-#Controller=sed1335
|
|
-Controller=optrex323
|
|
-#Controller=l4m132c
|
|
-#Controller=l4m320t
|
|
-
|
|
-# Options
|
|
-# Pass display specific options
|
|
-# Possible values: See driver-specific hardware page at http://serdisplib.sourceforge.net
|
|
-#
|
|
-# IMPORTANT: when using generic controllers like sed1330,sed1335,t6963c, width and height
|
|
-# need to be set here (if different from default settings)!
|
|
-# (serdisplib needs to be extended to be able to use 'Width' and 'Height'
|
|
-# settings directly - this will be added later)
|
|
-#
|
|
-#Options=MODE=8080
|
|
-#Options=DELAY=2000;FONTWIDTH=8;CHECK=1
|
|
-#Options=WIDTH=128;HEIGHT=64
|
|
-#Options=WIDTH=128;HEIGHT=64;DELAY=2000;FONTWIDTH=8;CHECK=1
|
|
-
|
|
-# Wiring
|
|
-# Select Wiring
|
|
-# Possible values: See driver-specific hardware page at http://serdisplib.sourceforge.net
|
|
-#Wiring=1
|
|
-#Wiring=PowerLCD
|
|
-#Wiring=DATA8,CS:nAUTO,A0:INIT,WR:nSTRB,RD:nSELIN
|
|
-
|
|
-# FGColour
|
|
-# Drawing colour for non-monochrome displays
|
|
-# Possible values: 0xRRGGBB (eg.: 0xFF0000)
|
|
-# Defaults to black (0x000000) if not set
|
|
-#FGColour=0x000000
|
|
-
|
|
-# BGColour
|
|
-# Background colour for non-monochrome displays
|
|
-# Possible values: 0xRRGGBB (eg.: 0x00FFFF)
|
|
-# Defaults to white (0xFFFFFF) if not set
|
|
-#BGColour=0xFFFFFF
|
|
-
|
|
-Device=/dev/parport0
|
|
-#Port=0x378
|
|
-#Device=HID:/dev/usb/hiddev0
|
|
-#Device=HID:/dev/hiddev0
|
|
-#Device=USB:USB:4243/ee20 # Linux4Media 320T TouchLCD
|
|
-#UpsideDown=no
|
|
-#Invert=no
|
|
-Contrast=5
|
|
-Backlight=yes
|
|
-
|
|
-# Settings 'Width' and 'Height' are ignored at the moment. For generic controllers # (sed1330/1335, t6963) width and height need to be set using setting 'Options' (look above)
|
|
-##Width=240
|
|
-##Height=128
|
|
-
|
|
-########################################################################
|
|
-
|
|
-[noritake800]
|
|
-# noritake800 driver
|
|
-# This is an 8-bit driver module for Noritake Noritake 800(A) series VFD
|
|
-# displays. The VFD is operating in it's 8 bit-mode connected to a
|
|
-# single PC parallel port.
|
|
-# Default size: 128 x 64
|
|
-Driver=noritake800
|
|
-
|
|
-Device=/dev/parport0
|
|
-#Port=0x378
|
|
-Width=128
|
|
-Height=64
|
|
-#UpsideDown=no
|
|
-#Invert=no
|
|
-Brightness=50
|
|
-AdjustTiming=50
|
|
-RefreshDisplay=50
|
|
-
|
|
-# Wiring
|
|
-# Select the type of wiring your display is connected with.
|
|
-# Possible values: 'LiquidMp3', 'MZ'
|
|
-# Default value: 'LiquidMp3'
|
|
-Wiring=LiquidMp3
|
|
-
|
|
-########################################################################
|
|
-
|
|
-[avrctl]
|
|
-# avrctl driver
|
|
-# This is an driver module for my AVR controlled LCD display connected via
|
|
-# USB port. It uses some simple commands to update the display content.
|
|
-# Default size: 256 x 128
|
|
-Driver=avrctl
|
|
-Device=/dev/ttyUSB0
|
|
-Width=256
|
|
-Height=128
|
|
-#UpsideDown=no
|
|
-#Invert=no
|
|
-Brightness=50
|
|
-RefreshDisplay=1
|
|
-
|
|
-########################################################################
|
|
-
|
|
-[g15daemon]
|
|
-# pseudo device for the g15daemon meta driver
|
|
-# Output goes to the g15daemon which then displays it
|
|
-Driver=g15daemon
|
|
-Width=160
|
|
-Height=43
|
|
-
|
|
-########################################################################
|
|
-
|
|
-[network]
|
|
-# network driver
|
|
-# Default size: 240 x 128
|
|
-Driver=network
|
|
-Width=256
|
|
-Height=128
|
|
-UpsideDown=no
|
|
-Invert=no
|
|
-Brightness=10
|
|
-RefreshDisplay=1
|
|
-
|
|
-########################################################################
|
|
-
|
|
-[dm140gink]
|
|
-# dm140gink driver
|
|
-# This is an driver module for Futaba DM140-GINK VFD displays.
|
|
-# The VFD is built-in in some HTPC cases and connected to a
|
|
-# USB port.
|
|
-# Default size: 112 x 16
|
|
-Driver=dm140gink
|
|
-#Width=112
|
|
-#Height=16
|
|
-#UpsideDown=no
|
|
-
|
|
-# Invertion is not supported
|
|
-#Invert=no
|
|
-
|
|
-# USB VendorID and ProductID
|
|
-#Vendor=0x040b
|
|
-#Product=0x7001
|
|
-# USB ID activy 5xx:
|
|
-#Vendor=0x1509
|
|
-#Product=0x925d
|
|
-########################################################################
|
|
-
|
|
-[futabaMDM166A]
|
|
-# futabaMDM166A driver
|
|
-# This is an driver module for Futaba MDM166A VFD displays.
|
|
-# The VFD is built-in in Targa HTPC cases and connected to USB port.
|
|
-# Default size: 96 x 16
|
|
-Driver=futabaMDM166A
|
|
-
|
|
-#Width=96
|
|
-#Height=16
|
|
-#UpsideDown=no
|
|
-#Invert=no
|
|
-#Brightness=50
|
|
-#RefreshDisplay=1000
|
|
-########################################################################
|
|
-
|
|
[ax206dpf]
|
|
# THIS IS AN EXPERIMENTAL DRIVER!
|
|
# You have to uncomment the variable HAVE_DRIVER_AX206DPF
|
|
@@ -609,8 +128,8 @@ Driver=futabaMDM166A
|
|
#
|
|
# Default size: 320 x 240 or 240 x 320 (see "Portrait")
|
|
Driver=ax206dpf
|
|
-#Width=320
|
|
-#Height=240
|
|
+Width=320
|
|
+Height=240
|
|
#
|
|
# UpsideDown
|
|
# Rotates the display output by 180 degrees. This might be useful, if
|
|
@@ -668,69 +187,3 @@ Driver=ax206dpf
|
|
# Default value: 'nnnn'
|
|
#Flip=nnnn
|
|
#
|
|
-
|
|
-########################################################################
|
|
-
|
|
-[vncserver]
|
|
-# vncserver driver
|
|
-# Output goes to a vncserver device
|
|
-# Default size: 320 x 240
|
|
-Driver=vncserver
|
|
-Width=320
|
|
-Height=240
|
|
-#
|
|
-# HttpDir
|
|
-# Webclients directory of libvncserver installation (only needed for webclient access)
|
|
-#HttpDir=/usr/share/webclients
|
|
-
|
|
-########################################################################
|
|
-
|
|
-[ssd1306]
|
|
-# ssd1306 driver
|
|
-# This is a driver module for the SSD1306 OLED display controller.
|
|
-# Default size: 128 x 64
|
|
-Driver=ssd1306
|
|
-Device=0
|
|
-Width=128
|
|
-Height=64
|
|
-
|
|
-[ili9341]
|
|
-# ili9341 driver
|
|
-# This is a driver module for the ILI9341 TFT display controller.
|
|
-# Default size: 320x240
|
|
-Driver=ili9341
|
|
-Device=0
|
|
-Width=320
|
|
-Height=240
|
|
-
|
|
-[alphacool]
|
|
-# Driver setting for the Alphacool USB LCD (240x128 pixels)
|
|
-# Requires serdisplib to be installed
|
|
-Driver=serdisp
|
|
-Controller=alphacool
|
|
-Device=USB:060c/04eb
|
|
-Backlight=yes
|
|
-
|
|
-[sdcmegtron]
|
|
-# Driver setting for the SDC Megtron USB LCD (240x128 pixels)
|
|
-# Requires serdisplib to be installed
|
|
-Driver=serdisp
|
|
-Controller=sdcmegtron
|
|
-Device=USB:152a/8380
|
|
-Backlight=yes
|
|
-
|
|
-[usbserlcd]
|
|
-# This is the driver for displays based on the USBserLCD firmware:
|
|
-# https://github.com/M-Reimer/usbserlcd
|
|
-Driver=usbserlcd
|
|
-Device=/dev/ttyUSB0
|
|
-RefreshDisplay=0
|
|
-
|
|
-[st7565r-reel]
|
|
-# st7565r driver
|
|
-# This is a driver module for the ST7565R based Reelbox frontpanel LCD
|
|
-# Default size: 128 x 64
|
|
-Driver=st7565r-reel
|
|
-Device=/dev/ttyS0
|
|
-Brightness=100
|
|
-Contrast=80
|
|
--
|
|
2.20.1
|
|
|
|
|