When you are not loggedin, and have no cookie etc.. we always returned a 401.
This was mainly to allow the login page on all the sub pages, and after
login being redirected to the requested page, for these pages a 401 is a
valid response, since, you do not have access.
But for the main `/admin` page, it should just respond with a `200` and
show the login page.
This PR fixes this flow and response. It should prevent people using
Fail2ban, or other tools being triggered by only accessing the login page.
Resolves#3540
During setting the latest commit hash for Rocket and updating all the
other crates, there were some messages regarding the usage of `String`
for the Rocket endpoint function calls. I acted upon this message and
changed all `String` types to `&str` and modified the code where needed.
This ended up in less alloc calls, and probably also a bit less memory usage.
- Updated all the crates and commit hashes
- Modified all `String` to `&str` where applicable
Since we now use the `ClientIp` Guard on a lot more places, it also
increases the size of binary, and the macro generated code because of
this extra Guard. By merging the `ClientIp` Guard with the several
`Header` guards we have it reduces the amount of code generated
(including LLVM IR), but also a small speedup in build time.
I also spotted some small `json!()` optimizations which also reduced the
amount of code generated.
Added support for Argon2 hashing support for the `ADMIN_TOKEN` instead
of only supporting a plain text string.
The hash must be a PHC string which can be generated via the `argon2`
CLI **or** via the also built-in hash command in Vaultwarden.
You can simply run `vaultwarden hash` to generate a hash based upon a
password the user provides them self.
Added a warning during startup and within the admin settings panel is
the `ADMIN_TOKEN` is not an Argon2 hash.
Within the admin environment a user can ignore that warning and it will
not be shown for at least 30 days. After that the warning will appear
again unless the `ADMIN_TOKEN` has be converted to an Argon2 hash.
I have also tested this on my RaspberryPi 2b and there the `Bitwarden`
preset takes almost 4.5 seconds to generate/verify the Argon2 hash.
Using the `OWASP` preset it is below 1 second, which I think should be
fine for low-graded hardware. If it is needed people could use lower
memory settings, but in those cases I even doubt Vaultwarden it self
would run. They can always use the `argon2` CLI and generate a faster hash.
- Updated datatables
- Added NTP Time check
- Added Collections, Groups and Events count for orgs
- Renamed `Items` to `Ciphers`
- Some small style updates
- Supports the new Collection/Group/User editing UI's
- Support `/partial` endpoint for cipher updating to allow folder and favorite update for read-only ciphers.
- Prevent `Favorite`, `Folder`, `read-only` and `hide-passwords` from being added to the organizational sync.
- Added and corrected some `Object` key's to the output json.
Fixes#3279
We also need to validate the note sizes on key-rotation.
If we do not validate them before we store them, that could lead to a
partial or total loss of the password vault. Validating these
restrictions before actually processing them to store/replace the
existing ciphers should prevent this.
There was also a small bug when using web-sockets. The client which is
triggering the password/key-rotation change should not be forced to
logout via a web-socket request. That is something the client will
handle it self. Refactored the logout notification to either send the
device uuid or not on specific actions.
Fixes#3152
We also need to validate the note sizes on key-rotation.
If we do not validate them before we store them, that could lead to a
partial or total loss of the password vault. Validating these
restrictions before actually processing them to store/replace the
existing ciphers should prevent this.
There was also a small bug when using web-sockets. The client which is
triggering the password/key-rotation change should not be forced to
logout via a web-socket request. That is something the client will
handle it self. Refactored the logout notification to either send the
device uuid or not on specific actions.
Fixes#3152
Previously the websocket notifications were using `app_id` as the
`ContextId`. This was incorrect and should have been the device_uuid
from the client device executing the request. The clients will ignore
the websocket request if the uuid matches. This also fixes some issues
with the Desktop client which is able to modify attachments within the
same screen and causes an issue when saving the attachment afterwards.
Also changed the way to handle removed attachments, since that causes an
error saving the vault cipher afterwards, complaining about a missing
attachment. Bitwarden ignores this, and continues with the remaining
attachments (if any). This also fixes#2591 .
Further some more websocket notifications have been added to some other
functions which enhance the user experience.
- Logout users when deauthed, changed password, rotated keys
- Trigger OrgSyncKeys on user confirm and removal
- Added some extra to the send feature
Also renamed UpdateTypes to match Bitwarden naming.
- Removed `unsafe-inline` for javascript from CSP.
The admin interface now uses files instead of inline javascript.
- Modified javascript to work not being inline.
- Run eslint over javascript and fixed some items.
- Added a `to_json` Handlebars helper.
Used at the diagnostics page.
- Changed `AdminTemplateData` struct to be smaller.
The `config` was always added, but only used at one page.
Same goes for `can_backup` and `version`.
- Also inlined CSS.
We can't remove the `unsafe-inline` from css, because that seems to
break the web-vault currently. That might need some further checks.
But for now the 404 page and all the admin pages are clear of inline scripts and styles.
Previously the websocket notifications were using `app_id` as the
`ContextId`. This was incorrect and should have been the device_uuid
from the client device executing the request. The clients will ignore
the websocket request if the uuid matches. This also fixes some issues
with the Desktop client which is able to modify attachments within the
same screen and causes an issue when saving the attachment afterwards.
Also changed the way to handle removed attachments, since that causes an
error saving the vault cipher afterwards, complaining about a missing
attachment. Bitwarden ignores this, and continues with the remaining
attachments (if any). This also fixes#2591 .
Further some more websocket notifications have been added to some other
functions which enhance the user experience.
- Logout users when deauthed, changed password, rotated keys
- Trigger OrgSyncKeys on user confirm and removal
- Added some extra to the send feature
Also renamed UpdateTypes to match Bitwarden naming.
- Removed `unsafe-inline` for javascript from CSP.
The admin interface now uses files instead of inline javascript.
- Modified javascript to work not being inline.
- Run eslint over javascript and fixed some items.
- Added a `to_json` Handlebars helper.
Used at the diagnostics page.
- Changed `AdminTemplateData` struct to be smaller.
The `config` was always added, but only used at one page.
Same goes for `can_backup` and `version`.
- Also inlined CSS.
We can't remove the `unsafe-inline` from css, because that seems to
break the web-vault currently. That might need some further checks.
But for now the 404 page and all the admin pages are clear of inline scripts and styles.
Previously the websocket notifications were using `app_id` as the
`ContextId`. This was incorrect and should have been the device_uuid
from the client device executing the request. The clients will ignore
the websocket request if the uuid matches. This also fixes some issues
with the Desktop client which is able to modify attachments within the
same screen and causes an issue when saving the attachment afterwards.
Also changed the way to handle removed attachments, since that causes an
error saving the vault cipher afterwards, complaining about a missing
attachment. Bitwarden ignores this, and continues with the remaining
attachments (if any). This also fixes#2591 .
Further some more websocket notifications have been added to some other
functions which enhance the user experience.
- Logout users when deauthed, changed password, rotated keys
- Trigger OrgSyncKeys on user confirm and removal
- Added some extra to the send feature
Also renamed UpdateTypes to match Bitwarden naming.
- Removed `unsafe-inline` for javascript from CSP.
The admin interface now uses files instead of inline javascript.
- Modified javascript to work not being inline.
- Run eslint over javascript and fixed some items.
- Added a `to_json` Handlebars helper.
Used at the diagnostics page.
- Changed `AdminTemplateData` struct to be smaller.
The `config` was always added, but only used at one page.
Same goes for `can_backup` and `version`.
- Also inlined CSS.
We can't remove the `unsafe-inline` from css, because that seems to
break the web-vault currently. That might need some further checks.
But for now the 404 page and all the admin pages are clear of inline scripts and styles.
Previously the websocket notifications were using `app_id` as the
`ContextId`. This was incorrect and should have been the device_uuid
from the client device executing the request. The clients will ignore
the websocket request if the uuid matches. This also fixes some issues
with the Desktop client which is able to modify attachments within the
same screen and causes an issue when saving the attachment afterwards.
Also changed the way to handle removed attachments, since that causes an
error saving the vault cipher afterwards, complaining about a missing
attachment. Bitwarden ignores this, and continues with the remaining
attachments (if any). This also fixes#2591 .
Further some more websocket notifications have been added to some other
functions which enhance the user experience.
- Logout users when deauthed, changed password, rotated keys
- Trigger OrgSyncKeys on user confirm and removal
- Added some extra to the send feature
Also renamed UpdateTypes to match Bitwarden naming.
- Removed `unsafe-inline` for javascript from CSP.
The admin interface now uses files instead of inline javascript.
- Modified javascript to work not being inline.
- Run eslint over javascript and fixed some items.
- Added a `to_json` Handlebars helper.
Used at the diagnostics page.
- Changed `AdminTemplateData` struct to be smaller.
The `config` was always added, but only used at one page.
Same goes for `can_backup` and `version`.
- Also inlined CSS.
We can't remove the `unsafe-inline` from css, because that seems to
break the web-vault currently. That might need some further checks.
But for now the 404 page and all the admin pages are clear of inline scripts and styles.
- Removed `unsafe-inline` for javascript from CSP.
The admin interface now uses files instead of inline javascript.
- Modified javascript to work not being inline.
- Run eslint over javascript and fixed some items.
- Added a `to_json` Handlebars helper.
Used at the diagnostics page.
- Changed `AdminTemplateData` struct to be smaller.
The `config` was always added, but only used at one page.
Same goes for `can_backup` and `version`.
- Also inlined CSS.
We can't remove the `unsafe-inline` from css, because that seems to
break the web-vault currently. That might need some further checks.
But for now the 404 page and all the admin pages are clear of inline scripts and styles.
- Removed `unsafe-inline` for javascript from CSP.
The admin interface now uses files instead of inline javascript.
- Modified javascript to work not being inline.
- Run eslint over javascript and fixed some items.
- Added a `to_json` Handlebars helper.
Used at the diagnostics page.
- Changed `AdminTemplateData` struct to be smaller.
The `config` was always added, but only used at one page.
Same goes for `can_backup` and `version`.
- Also inlined CSS.
We can't remove the `unsafe-inline` from css, because that seems to
break the web-vault currently. That might need some further checks.
But for now the 404 page and all the admin pages are clear of inline scripts and styles.
- Removed `unsafe-inline` for javascript from CSP.
The admin interface now uses files instead of inline javascript.
- Modified javascript to work not being inline.
- Run eslint over javascript and fixed some items.
- Added a `to_json` Handlebars helper.
Used at the diagnostics page.
- Changed `AdminTemplateData` struct to be smaller.
The `config` was always added, but only used at one page.
Same goes for `can_backup` and `version`.
- Also inlined CSS.
We can't remove the `unsafe-inline` from css, because that seems to
break the web-vault currently. That might need some further checks.
But for now the 404 page and all the admin pages are clear of inline scripts and styles.
- Removed `unsafe-inline` for javascript from CSP.
The admin interface now uses files instead of inline javascript.
- Modified javascript to work not being inline.
- Run eslint over javascript and fixed some items.
- Added a `to_json` Handlebars helper.
Used at the diagnostics page.
- Changed `AdminTemplateData` struct to be smaller.
The `config` was always added, but only used at one page.
Same goes for `can_backup` and `version`.
- Also inlined CSS.
We can't remove the `unsafe-inline` from css, because that seems to
break the web-vault currently. That might need some further checks.
But for now the 404 page and all the admin pages are clear of inline scripts and styles.
Previously the websocket notifications were using `app_id` as the
`ContextId`. This was incorrect and should have been the device_uuid
from the client device executing the request. The clients will ignore
the websocket request if the uuid matches. This also fixes some issues
with the Desktop client which is able to modify attachments within the
same screen and causes an issue when saving the attachment afterwards.
Also changed the way to handle removed attachments, since that causes an
error saving the vault cipher afterwards, complaining about a missing
attachment. Bitwarden ignores this, and continues with the remaining
attachments (if any). This also fixes#2591 .
Further some more websocket notifications have been added to some other
functions which enhance the user experience.
- Logout users when deauthed, changed password, rotated keys
- Trigger OrgSyncKeys on user confirm and removal
- Added some extra to the send feature
Also renamed UpdateTypes to match Bitwarden naming.
- Several cleanups and code optimizations for Emergency Access
- Fixed a race-condition regarding jobs for Emergency Access
- Some other small changes like `allow(clippy::)` removals
Fixes#2925
- Several cleanups and code optimizations for Emergency Access
- Fixed a race-condition regarding jobs for Emergency Access
- Some other small changes like `allow(clippy::)` removals
Fixes#2925
- Several cleanups and code optimizations for Emergency Access
- Fixed a race-condition regarding jobs for Emergency Access
- Some other small changes like `allow(clippy::)` removals
Fixes#2925
- Several cleanups and code optimizations for Emergency Access
- Fixed a race-condition regarding jobs for Emergency Access
- Some other small changes like `allow(clippy::)` removals
Fixes#2925
- Several cleanups and code optimizations for Emergency Access
- Fixed a race-condition regarding jobs for Emergency Access
- Some other small changes like `allow(clippy::)` removals
Fixes#2925
This PR adds event/audit logging support for organizations.
By default this feature is disabled, since it does log a lot and adds
extra database transactions.
All events are touched except a few, since we do not support those
features (yet), like SSO for example.
This feature is tested with multiple clients and all database types.
Fixes#229
This PR adds event/audit logging support for organizations.
By default this feature is disabled, since it does log a lot and adds
extra database transactions.
All events are touched except a few, since we do not support those
features (yet), like SSO for example.
This feature is tested with multiple clients and all database types.
Fixes#229
currently, if the admin guard fails the user will get a 404 page.
and when the session times out after 20 minutes post methods will
give the reason "undefined" as a response while generating the support
string will fail without any user feedback.
this commit changes the error handling on admin pages
* by removing the reliance on Rockets forwarding and making the login
page an explicit route that can be redirected to from all admin pages
* by removing the obsolete and mostly unused Referer struct we can
redirect the user back to the requested admin page directley
* by providing an error message for json requests the
`get_diagnostics_config` and all post methods can return a more
comprehensible message and the user can be alerted
* the `admin_url()` function can be simplified because rfc2616 has been
obsoleted by rfc7231 in 2014 (and also by the recently released
rfc9110) which allows relative urls in the Location header.
c.f. https://www.rfc-editor.org/rfc/rfc7231#section-7.1.2 and
https://www.rfc-editor.org/rfc/rfc9110#section-10.2.2
This PR adds event/audit logging support for organizations.
By default this feature is disabled, since it does log a lot and adds
extra database transactions.
All events are touched except a few, since we do not support those
features (yet), like SSO for example.
This feature is tested with multiple clients and all database types.
Fixes#229
Previously FlashMessage was used to provide an error message during login.
This PR changes that flow to not use redirect for this, but renders the HTML and responds using the correct status code where needed. This should solve some issues which were reported in the past.
Thanks to @RealOrangeOne, for initiating this with a PR.
Fixes#2448Fixes#2712Closes#2715
Co-authored-by: Jake Howard <git@theorangeone.net>
This PR adds a the new v2022.8.x revoke feature which allows an
organization owner or admin to revoke access for one or more users.
This PR also fixes several permissions and policy checks which were faulty.
- Modified some functions to use DB Count features instead of iter/count aftwards.
- Rearanged some if statements (faster matching or just one if instead of nested if's)
- Added and fixed several policy checks where needed
- Some small updates on some response models
- Made some functions require an enum instead of an i32
A bit inspired by @paolobarbolini from this commit at lettre https://github.com/lettre/lettre/pull/784 .
I added a few more clippy lints here, and fixed the resulted issues.
Overall i think this could help in preventing future issues, and maybe
even peformance problems. It also makes some code a bit more clear.
We could always add more if we want to, i left a few out which i think
arn't that huge of an issue. Some like the `unused_async` are nice,
which resulted in a few `async` removals.
Some others are maybe a bit more estatic, like `string_to_string`, but i
think it looks better to use `clone` in those cases instead of `to_string` while they already are a string.
GeekCornerGH
BlackDex
Nikolay Nikolaev
Nils Mittler
Stefan Melmuk
Daniel García