topaLE
/
ahoy
mirror of https://github.com/lumapu/ahoy.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
Browse Source

updated the ESP8266 readme

pull/189/head
DanielR92 3 years ago
committed by GitHub
parent
9fbfd9389e
commit
83a2c98792
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 48 additions and 38 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 86
      tools/esp8266/README.md

86
tools/esp8266/README.md
View File

@ -1,10 +1,23 @@
## OVERVIEW ## OVERVIEW
This code is intended to run on a Wemos D1mini or similar. The code is based on 'Hubi's code, which can be found here: <https://www.mikrocontroller.net/topic/525778?page=3#7033371> This page describes how the module of a Wemos D1 mini and ESP8266 is wired to the radio module, flashed and how the further steps are to communicate with the WR HM series.
The NRF24L01+ radio module is connected to the standard SPI pins. Additional there are 3 pins, which can be set individual: CS, CE and IRQ #### Compatiblity
These pins can be changed from the /setup URL For now the following inverters should work out of the box:
- HM350
- HM400
- HM600
- HM700
- HM800
- HM1200
- HM1500
The NRF24L01+ radio module is connected to the standard SPI pins.
Additional there are 3 pins, which can be set individual: CS, CE and IRQ
These pins can be changed in the http://<ip-adress>/setup URL or with a click on the Setup link.
## ESP8266 electr. associate
<img src="https://github.com/grindylow/ahoy/blob/main/doc/ESP8266_nRF24L01%2B_bb.png" width="300">
## Compile ## Compile
@ -13,63 +26,60 @@ This code can be compiled using Visual Studio Code and **PlatformIO** Addon. The
- Board: Generic ESP8266 Module - Board: Generic ESP8266 Module
- Flash-Size: 1MB (FS: none, OTA: 502kB) - Flash-Size: 1MB (FS: none, OTA: 502kB)
- Install libraries (not included in the Arduino IDE 1.8.19): - Install libraries (not included in the Arduino IDE 1.8.19):
- Time Arduino Time library (TimeLib.h) - `Time` 1.6.1
- RF24 Optimized high speed nRF24L01+ driver class documentation - `RF24` 1.4.5
- PubSubClient A client library for MQTT messaging. By Nick O'Leary - `PubSubClient` 2.8
- ArduinoJson Arduino Json library - `ArduinoJson` 6.19.4
### Optional Configuration before compilation ### Optional Configuration before compilation
- number of supported inverters (set to 3 by default) `defines.h` - number of supported inverters (set to 3 by default) `config.h`
- DTU radio id `hmRadio.h` - DTU radio id `hmRadio.h` (default = 1234567801
- unformated list in webbrowser `/livedata` `config.h`, `LIVEDATA_VISUALIZED` - unformated list in webbrowser `/livedata` `config.h`, `LIVEDATA_VISUALIZED`
## Flash ESP with firmware ## Flash ESP with firmware
#### nodemcu-pyflasher (easy way)
1. download the flash-tool [nodemcu-pyflasher](https://github.com/marcelstoer/nodemcu-pyflasher)
2. download latest release bin-file from [ahoy_](https://github.com/grindylow/ahoy/releases)
3. connect the target device with your pc.
4. Set the correct serial port and select the correct *.bin file
5. click now on "Flash NodeMCU"
1. flash the ESP with the compiled firmware using the UART pins or any preinstalled firmware with OTA capabilities 1. flash the ESP with the compiled firmware using the UART pins or any preinstalled firmware with OTA capabilities
2. repower the ESP 2. repower the ESP
3. the ESP will start as access point (AP) if there is no network config stored in its eeprom 3. the ESP will start as access point (AP) if there is no network config stored in its eeprom
4. connect to the AP, you will be forwarded to the setup page 4. connect to the AP, you will be forwarded to the setup page
5. configure your WiFi settings, save, repower
6. check your router or serial console for the IP address of the module. You can try ping the configured device name as well.
X. configure your WiFi settings, save, repower
Y. check your router or serial console for the IP address of the module. You can try ping the configured device name as well.
## pages
| page | output |
| ---- | ------ |
| /uptime | 0 Days, 01:37:34; now: 2022-08-21 11:13:53 |
| /reboot | reboot dtu device |
| /erase | |
| /factory | |
| /setup | |
| /save | open the setup site |
| /cmdstat | show stat from the home site |
| /visualization | |
| /livedata | |
| /json | json output from the livedata |
| /api | |
## Usage ## Usage
Connect the ESP to power and to your serial console (optional). The webinterface has the following abilities: The webinterface has the following abilities:
- OTA Update (over the air update) - OTA Update (over the air update)
- Configuration (Wifi, inverter(s), Pinout, MQTT) - Configuration (Wifi, inverter(s), NTP Server, Pinout, MQTT, Amplifier Power Level, Debug)
- visual display of the connected inverters / modules - visual display of the connected inverters / modules
- some statistics about communication (debug) - some statistics about communication (debug)
The serial console will print the converted values which were read out of the inverter(s) The serial console will print the converted values which were read out of the inverter(s)
## Compatiblity
For now the following inverters should work out of the box:
- HM350
- HM400
- HM600
- HM700
- HM800
- HM1200
- HM1500
## USED LIBRARIES
- `ESP8266WiFi` 1.0
- `DNSServer` 1.1.0
- `Ticker` 1.0
- `ESP8266HTTPUpdateServer` 1.0
- `Time` 1.6.1
- `RF24` 1.4.5
- `PubSubClient` 2.8
- `ArduinoJson` 6.19.4
## Todo's [See this post](https://github.com/grindylow/ahoy/issues/142) ## Todo's [See this post](https://github.com/grindylow/ahoy/issues/142)
- [ ] Wechsel zu AsyncWebServer und ElegantOTA für Stabilität - [ ] Wechsel zu AsyncWebServer und ElegantOTA für Stabilität

Write Preview
Loading…
Cancel
Save