0.8.112

* improved wizard
* converted ePaper and Ethernet to hal-SPI
* improved network connection

patches/GxEPD2_SW_SPI.patch

@@ -1,362 +0,0 @@
-diff --git a/src/GxEPD2_EPD.cpp b/src/GxEPD2_EPD.cpp
-index 8df8bef..91d7f49 100644
---- a/src/GxEPD2_EPD.cpp
-+++ b/src/GxEPD2_EPD.cpp
-@@ -19,9 +19,9 @@
- 
- GxEPD2_EPD::GxEPD2_EPD(int16_t cs, int16_t dc, int16_t rst, int16_t busy, int16_t busy_level, uint32_t busy_timeout,
-                        uint16_t w, uint16_t h, GxEPD2::Panel p, bool c, bool pu, bool fpu) :
--  WIDTH(w), HEIGHT(h), panel(p), hasColor(c), hasPartialUpdate(pu), hasFastPartialUpdate(fpu),
-+  WIDTH(w), HEIGHT(h), panel(p), hasColor(c), hasPartialUpdate(pu), hasFastPartialUpdate(fpu), _sck(-1), _mosi(-1),
-   _cs(cs), _dc(dc), _rst(rst), _busy(busy), _busy_level(busy_level), _busy_timeout(busy_timeout), _diag_enabled(false),
--  _pSPIx(&SPI), _spi_settings(4000000, MSBFIRST, SPI_MODE0)
-+  _spi_settings(4000000, MSBFIRST, SPI_MODE0)
- {
-   _initial_write = true;
-   _initial_refresh = true;
-@@ -71,27 +71,30 @@ void GxEPD2_EPD::init(uint32_t serial_diag_bitrate, bool initial, uint16_t reset
-   {
-     pinMode(_busy, INPUT);
-   }
--  _pSPIx->begin();
--  if (_busy == MISO) // may be overridden
--  {
--    pinMode(_busy, INPUT);
--  }
--  if (_dc == MISO) // may be overridden, TTGO T5 V2.66
--  {
--    pinMode(_dc, OUTPUT);
--  }
--  if (_cs == MISO) // may be overridden
-+  if (_sck < 0) SPI.begin();
-+}
-+
-+void GxEPD2_EPD::init(int16_t sck, int16_t mosi, uint32_t serial_diag_bitrate, bool initial, uint16_t reset_duration, bool pulldown_rst_mode)
-+{
-+  if ((sck >= 0) && (mosi >= 0))
-   {
--    pinMode(_cs, INPUT);
--  }
-+    _sck = sck;
-+    _mosi = mosi;
-+    digitalWrite(_sck, LOW);
-+    digitalWrite(_mosi, LOW);
-+    pinMode(_sck, OUTPUT);
-+    pinMode(_mosi, OUTPUT);
-+  } else _sck = -1;
-+  init(serial_diag_bitrate, initial, reset_duration, pulldown_rst_mode);
- }
- 
- void GxEPD2_EPD::end()
- {
--  _pSPIx->end();
-   if (_cs >= 0) pinMode(_cs, INPUT);
-   if (_dc >= 0) pinMode(_dc, INPUT);
-   if (_rst >= 0) pinMode(_rst, INPUT);
-+  if (_sck >= 0) pinMode(_sck, INPUT);
-+  if (_mosi >= 0) pinMode(_mosi, INPUT);
- }
- 
- void GxEPD2_EPD::setBusyCallback(void (*busyCallback)(const void*), const void* busy_callback_parameter)
-@@ -100,12 +103,6 @@ void GxEPD2_EPD::setBusyCallback(void (*busyCallback)(const void*), const void*
-   _busy_callback_parameter = busy_callback_parameter;
- }
- 
--void GxEPD2_EPD::selectSPI(SPIClass& spi, SPISettings spi_settings)
--{
--  _pSPIx = &spi;
--  _spi_settings = spi_settings;
--}
--
- void GxEPD2_EPD::_reset()
- {
-   if (_rst >= 0)
-@@ -174,115 +171,201 @@ void GxEPD2_EPD::_waitWhileBusy(const char* comment, uint16_t busy_time)
- 
- void GxEPD2_EPD::_writeCommand(uint8_t c)
- {
--  _pSPIx->beginTransaction(_spi_settings);
-+  _beginTransaction(_spi_settings);
-   if (_dc >= 0) digitalWrite(_dc, LOW);
-   if (_cs >= 0) digitalWrite(_cs, LOW);
--  _pSPIx->transfer(c);
-+  _spi_write(c);
-   if (_cs >= 0) digitalWrite(_cs, HIGH);
-   if (_dc >= 0) digitalWrite(_dc, HIGH);
--  _pSPIx->endTransaction();
-+  _endTransaction();
- }
- 
- void GxEPD2_EPD::_writeData(uint8_t d)
- {
--  _pSPIx->beginTransaction(_spi_settings);
-+  _beginTransaction(_spi_settings);
-   if (_cs >= 0) digitalWrite(_cs, LOW);
--  _pSPIx->transfer(d);
-+  _spi_write(d);
-   if (_cs >= 0) digitalWrite(_cs, HIGH);
--  _pSPIx->endTransaction();
-+  _endTransaction();
- }
- 
- void GxEPD2_EPD::_writeData(const uint8_t* data, uint16_t n)
- {
--  _pSPIx->beginTransaction(_spi_settings);
-+  _beginTransaction(_spi_settings);
-   if (_cs >= 0) digitalWrite(_cs, LOW);
--  for (uint16_t i = 0; i < n; i++)
-+  for (uint8_t i = 0; i < n; i++)
-   {
--    _pSPIx->transfer(*data++);
-+    _spi_write(*data++);
-   }
-   if (_cs >= 0) digitalWrite(_cs, HIGH);
--  _pSPIx->endTransaction();
-+  _endTransaction();
- }
- 
- void GxEPD2_EPD::_writeDataPGM(const uint8_t* data, uint16_t n, int16_t fill_with_zeroes)
- {
--  _pSPIx->beginTransaction(_spi_settings);
-+  _beginTransaction(_spi_settings);
-   if (_cs >= 0) digitalWrite(_cs, LOW);
--  for (uint16_t i = 0; i < n; i++)
-+  for (uint8_t i = 0; i < n; i++)
-   {
--    _pSPIx->transfer(pgm_read_byte(&*data++));
-+    _spi_write(pgm_read_byte(&*data++));
-   }
-   while (fill_with_zeroes > 0)
-   {
--    _pSPIx->transfer(0x00);
-+    _spi_write(0x00);
-     fill_with_zeroes--;
-   }
-   if (_cs >= 0) digitalWrite(_cs, HIGH);
--  _pSPIx->endTransaction();
-+  _endTransaction();
- }
- 
- void GxEPD2_EPD::_writeDataPGM_sCS(const uint8_t* data, uint16_t n, int16_t fill_with_zeroes)
- {
--  _pSPIx->beginTransaction(_spi_settings);
-+  _beginTransaction(_spi_settings);
-   for (uint8_t i = 0; i < n; i++)
-   {
-     if (_cs >= 0) digitalWrite(_cs, LOW);
--    _pSPIx->transfer(pgm_read_byte(&*data++));
-+    _spi_write(pgm_read_byte(&*data++));
-     if (_cs >= 0) digitalWrite(_cs, HIGH);
-   }
-   while (fill_with_zeroes > 0)
-   {
-     if (_cs >= 0) digitalWrite(_cs, LOW);
--    _pSPIx->transfer(0x00);
-+    _spi_write(0x00);
-     fill_with_zeroes--;
-     if (_cs >= 0) digitalWrite(_cs, HIGH);
-   }
--  _pSPIx->endTransaction();
-+  _endTransaction();
- }
- 
- void GxEPD2_EPD::_writeCommandData(const uint8_t* pCommandData, uint8_t datalen)
- {
--  _pSPIx->beginTransaction(_spi_settings);
-+  _beginTransaction(_spi_settings);
-   if (_dc >= 0) digitalWrite(_dc, LOW);
-   if (_cs >= 0) digitalWrite(_cs, LOW);
--  _pSPIx->transfer(*pCommandData++);
-+  _spi_write(*pCommandData++);
-   if (_dc >= 0) digitalWrite(_dc, HIGH);
-   for (uint8_t i = 0; i < datalen - 1; i++)  // sub the command
-   {
--    _pSPIx->transfer(*pCommandData++);
-+    _spi_write(*pCommandData++);
-   }
-   if (_cs >= 0) digitalWrite(_cs, HIGH);
--  _pSPIx->endTransaction();
-+  _endTransaction();
- }
- 
- void GxEPD2_EPD::_writeCommandDataPGM(const uint8_t* pCommandData, uint8_t datalen)
- {
--  _pSPIx->beginTransaction(_spi_settings);
-+  _beginTransaction(_spi_settings);
-   if (_dc >= 0) digitalWrite(_dc, LOW);
-   if (_cs >= 0) digitalWrite(_cs, LOW);
--  _pSPIx->transfer(pgm_read_byte(&*pCommandData++));
-+  _spi_write(pgm_read_byte(&*pCommandData++));
-   if (_dc >= 0) digitalWrite(_dc, HIGH);
-   for (uint8_t i = 0; i < datalen - 1; i++)  // sub the command
-   {
--    _pSPIx->transfer(pgm_read_byte(&*pCommandData++));
-+    _spi_write(pgm_read_byte(&*pCommandData++));
-   }
-   if (_cs >= 0) digitalWrite(_cs, HIGH);
--  _pSPIx->endTransaction();
-+  _endTransaction();
- }
- 
- void GxEPD2_EPD::_startTransfer()
- {
--  _pSPIx->beginTransaction(_spi_settings);
-+  _beginTransaction(_spi_settings);
-   if (_cs >= 0) digitalWrite(_cs, LOW);
- }
- 
- void GxEPD2_EPD::_transfer(uint8_t value)
- {
--  _pSPIx->transfer(value);
-+  _spi_write(value);
- }
- 
- void GxEPD2_EPD::_endTransfer()
- {
-   if (_cs >= 0) digitalWrite(_cs, HIGH);
--  _pSPIx->endTransaction();
-+  _endTransaction();
-+}
-+
-+void GxEPD2_EPD::_beginTransaction(const SPISettings& settings)
-+{
-+  if (_sck < 0) SPI.beginTransaction(settings);
-+}
-+
-+void GxEPD2_EPD::_spi_write(uint8_t data)
-+{
-+  if (_sck < 0) SPI.transfer(data);
-+  else
-+  {
-+#if defined (ESP8266)
-+    yield();
-+#endif
-+    for (int i = 0; i < 8; i++)
-+    {
-+      digitalWrite(_mosi, (data & 0x80) ? HIGH : LOW);
-+      data <<= 1;
-+      digitalWrite(_sck, HIGH);
-+      digitalWrite(_sck, LOW);
-+    }
-+  }
-+}
-+
-+void GxEPD2_EPD::_endTransaction()
-+{
-+  if (_sck < 0) SPI.endTransaction();
-+}
-+
-+uint8_t GxEPD2_EPD::_readData()
-+{
-+  uint8_t data = 0;
-+  _beginTransaction(_spi_settings);
-+  if (_cs >= 0) digitalWrite(_cs, LOW);
-+  if (_sck < 0)
-+  {
-+    data = SPI.transfer(0);
-+  }
-+  else
-+  {
-+    pinMode(_mosi, INPUT);
-+    for (int i = 0; i < 8; i++)
-+    {
-+      data <<= 1;
-+      digitalWrite(_sck, HIGH);
-+      data |= digitalRead(_mosi);
-+      digitalWrite(_sck, LOW);
-+    }
-+    pinMode(_mosi, OUTPUT);
-+  }
-+  if (_cs >= 0) digitalWrite(_cs, HIGH);
-+  _endTransaction();
-+  return data;
-+}
-+
-+void GxEPD2_EPD::_readData(uint8_t* data, uint16_t n)
-+{
-+  _beginTransaction(_spi_settings);
-+  if (_cs >= 0) digitalWrite(_cs, LOW);
-+  if (_sck < 0)
-+  {
-+    for (uint8_t i = 0; i < n; i++)
-+    {
-+      *data++ = SPI.transfer(0);
-+    }
-+  }
-+  else
-+  {
-+    pinMode(_mosi, INPUT);
-+    for (uint8_t i = 0; i < n; i++)
-+    {
-+      *data = 0;
-+      for (int i = 0; i < 8; i++)
-+      {
-+        *data <<= 1;
-+        digitalWrite(_sck, HIGH);
-+        *data |= digitalRead(_mosi);
-+        digitalWrite(_sck, LOW);
-+      }
-+      data++;
-+    }
-+    pinMode(_mosi, OUTPUT);
-+  }
-+  if (_cs >= 0) digitalWrite(_cs, HIGH);
-+  _endTransaction();
- }
-diff --git a/src/GxEPD2_EPD.h b/src/GxEPD2_EPD.h
-index 34c1145..c480b7d 100644
---- a/src/GxEPD2_EPD.h
-+++ b/src/GxEPD2_EPD.h
-@@ -8,6 +8,10 @@
- // Version: see library.properties
- //
- // Library: https://github.com/ZinggJM/GxEPD2
-+// To use SW SPI with GxEPD2:
-+//   add the special call to the added init method BEFORE the normal init method:
-+//   display.epd2.init(SW_SCK, SW_MOSI, 115200, true, 20, false); // define or replace SW_SCK, SW_MOSI
-+//   display.init(115200); // needed to init upper level
- 
- #ifndef _GxEPD2_EPD_H_
- #define _GxEPD2_EPD_H_
-@@ -35,6 +39,7 @@ class GxEPD2_EPD
-                uint16_t w, uint16_t h, GxEPD2::Panel p, bool c, bool pu, bool fpu);
-     virtual void init(uint32_t serial_diag_bitrate = 0); // serial_diag_bitrate = 0 : disabled
-     virtual void init(uint32_t serial_diag_bitrate, bool initial, uint16_t reset_duration = 10, bool pulldown_rst_mode = false);
-+    virtual void init(int16_t sck, int16_t mosi, uint32_t serial_diag_bitrate, bool initial, uint16_t reset_duration = 20, bool pulldown_rst_mode = false);
-     virtual void end(); // release SPI and control pins
-     //  Support for Bitmaps (Sprites) to Controller Buffer and to Screen
-     virtual void clearScreen(uint8_t value) = 0; // init controller memory and screen (default white)
-@@ -97,7 +102,6 @@ class GxEPD2_EPD
-     {
-       return (a > b ? a : b);
-     };
--    void selectSPI(SPIClass& spi, SPISettings spi_settings);
-   protected:
-     void _reset();
-     void _waitWhileBusy(const char* comment = 0, uint16_t busy_time = 5000);
-@@ -111,17 +115,22 @@ class GxEPD2_EPD
-     void _startTransfer();
-     void _transfer(uint8_t value);
-     void _endTransfer();
-+    void _beginTransaction(const SPISettings& settings);
-+    void _spi_write(uint8_t data);
-+    void _endTransaction();
-+  public:
-+    uint8_t _readData();
-+    void _readData(uint8_t* data, uint16_t n);
-   protected:
--    int16_t _cs, _dc, _rst, _busy, _busy_level;
-+    int16_t _cs, _dc, _rst, _busy, _busy_level, _sck, _mosi;;
-     uint32_t _busy_timeout;
-     bool _diag_enabled, _pulldown_rst_mode;
--    SPIClass* _pSPIx;
-     SPISettings _spi_settings;
-     bool _initial_write, _initial_refresh;
-     bool _power_is_on, _using_partial_mode, _hibernating;
-     bool _init_display_done;
-     uint16_t _reset_duration;
--    void (*_busy_callback)(const void*); 
-+    void (*_busy_callback)(const void*);
-     const void* _busy_callback_parameter;
- };
- 

scripts/applyPatches.py

@@ -28,9 +28,6 @@ def applyPatch(libName, patchFile):
 # list of patches to apply (relative to /src)
 applyPatch("ESPAsyncWebServer-esphome", "../patches/AsyncWeb_Prometheus.patch")
 
-#if env['PIOENV'][:13] == "opendtufusion":
-    #applyPatch("GxEPD2", "../patches/GxEPD2_SW_SPI.patch")
-#el
 if (env['PIOENV'][:5] == "esp32") or (env['PIOENV'][:13] == "opendtufusion"):
     applyPatch("GxEPD2", "../patches/GxEPD2_HAL.patch")
 

src/CHANGES.md

@@ -1,5 +1,10 @@
 # Development Changes
 
+## 0.8.112 - 2024-04-24
+* improved wizard
+* converted ePaper and Ethernet to hal-SPI
+* improved network connection
+
 ## 0.8.111 - 2024-04-17
 * fix MqTT discovery field `ALARM_MES_ID` #1591
 * fix Wifi reconnect for ESP32 #1589 #1575

src/defines.h

@@ -13,7 +13,7 @@
 //-------------------------------------
 #define VERSION_MAJOR       0
 #define VERSION_MINOR       8
-#define VERSION_PATCH       111
+#define VERSION_PATCH       112
 //-------------------------------------
 typedef struct {
     uint8_t ch;

src/network/AhoyEthernet.h

@@ -23,30 +23,20 @@ class AhoyEthernet : public AhoyNetwork {
 
             mEthSpi.begin(mConfig->sys.eth.pinMiso, mConfig->sys.eth.pinMosi, mConfig->sys.eth.pinSclk, mConfig->sys.eth.pinCs, mConfig->sys.eth.pinIrq, mConfig->sys.eth.pinRst);
             ETH.setHostname(mConfig->sys.deviceName);
-
-            // static IP
-            setupIp([this](IPAddress ip, IPAddress gateway, IPAddress mask, IPAddress dns1, IPAddress dns2) -> bool {
-                return ETH.config(ip, gateway, mask, dns1, dns2);
-            });
         }
 
-        void tickNetworkLoop() override {
-            if(mAp.isEnabled())
-                mAp.tickLoop();
-
-            switch(mStatus) {
-                case NetworkState::DISCONNECTED:
-                    if(mConnected) {
-                        mConnected = false;
-                        mOnNetworkCB(false);
-                        mAp.enable();
+        void OnEvent(WiFiEvent_t event) override {
+            switch(event) {
+                case ARDUINO_EVENT_ETH_CONNECTED:
+                    if(NetworkState::CONNECTED != mStatus) {
+                        mStatus = NetworkState::CONNECTED;
+                        DPRINTLN(DBG_INFO, F("Network connected"));
+                        setStaticIp();
                     }
                     break;
 
-                case NetworkState::CONNECTED:
-                    break;
-
-                case NetworkState::GOT_IP:
+                case ARDUINO_EVENT_ETH_GOT_IP:
+                    mStatus = NetworkState::GOT_IP;
                     if(!mConnected) {
                         mAp.disable();
                         mConnected = true;
@@ -55,13 +45,39 @@ class AhoyEthernet : public AhoyNetwork {
                         mOnNetworkCB(true);
                     }
                     break;
+
+                case ARDUINO_EVENT_ETH_STOP:
+                    [[fallthrough]];
+                case ARDUINO_EVENT_ETH_DISCONNECTED:
+                    mStatus = NetworkState::DISCONNECTED;
+                    if(mConnected) {
+                        mConnected = false;
+                        mOnNetworkCB(false);
+                        mAp.enable();
+                    }
+                    break;
+
+                default:
+                    break;
             }
         }
 
+        void tickNetworkLoop() override {
+            if(mAp.isEnabled())
+                mAp.tickLoop();
+        }
+
         String getIp(void) override {
             return ETH.localIP().toString();
         }
 
+    private:
+        void setStaticIp() override {
+            setupIp([this](IPAddress ip, IPAddress gateway, IPAddress mask, IPAddress dns1, IPAddress dns2) -> bool {
+                return ETH.config(ip, gateway, mask, dns1, dns2);
+            });
+        }
+
     private:
         AhoyEthernetSpi mEthSpi;
 };

src/network/AhoyEthernetSpi.h

@@ -50,7 +50,8 @@ class AhoyEthernetSpi {
             mHostDevice = (14 == pin_sclk) ? SPI2_HOST : SPI3_HOST;
             #endif
 
-            mSpiPatcher = SpiPatcher::getInstance(mHostDevice);
+            mSpiPatcher = SpiPatcher::getInstance(mHostDevice, false);
+            mSpiPatcher->initBus(pin_mosi, pin_miso, pin_sclk, SPI_DMA_CH_AUTO);
 
             spi_device_interface_config_t devcfg = {
                 .command_bits = 16, // actually address phase

src/network/AhoyNetwork.h

@@ -28,7 +28,6 @@ class AhoyNetwork {
 
             if('\0' == mConfig->sys.deviceName[0])
                 snprintf(mConfig->sys.deviceName, DEVNAME_LEN, "%s", DEF_DEVICE_NAME);
-            WiFi.hostname(mConfig->sys.deviceName);
 
             mAp.setup(&mConfig->sys);
 
@@ -117,13 +116,17 @@ class AhoyNetwork {
 
         void scan(void) {
             mScanActive = true;
-            if(NetworkState::GOT_IP != mStatus)
+            if(mWifiConnecting) {
+                mWifiConnecting = false;
                 WiFi.disconnect();
+            }
             WiFi.scanNetworks(true, true);
         }
         #endif
 
     protected:
+        virtual void setStaticIp() = 0;
+
         void setupIp(std::function<bool(IPAddress ip, IPAddress gateway, IPAddress mask, IPAddress dns1, IPAddress dns2)> cb) {
             if(mConfig->sys.ip.ip[0] != 0) {
                 IPAddress ip(mConfig->sys.ip.ip);
@@ -136,7 +139,7 @@ class AhoyNetwork {
             }
         }
 
-        void OnEvent(WiFiEvent_t event) {
+        virtual void OnEvent(WiFiEvent_t event) {
             switch(event) {
                 case SYSTEM_EVENT_STA_CONNECTED:
                     [[fallthrough]];
@@ -231,6 +234,9 @@ class AhoyNetwork {
         uint32_t *mUtcTimestamp = nullptr;
         bool mConnected = false;
         bool mScanActive = false;
+        #if !defined(ETHERNET)
+        bool mWifiConnecting = false;
+        #endif
 
         OnNetworkCB mOnNetworkCB;
         OnTimeCB mOnTimeCB;

src/network/AhoyWifiEsp32.h

@@ -17,16 +17,15 @@ class AhoyWifi : public AhoyNetwork {
         void begin() override {
             mAp.enable();
 
-            // static IP
-            setupIp([this](IPAddress ip, IPAddress gateway, IPAddress mask, IPAddress dns1, IPAddress dns2) -> bool {
-                return WiFi.config(ip, gateway, mask, dns1, dns2);
-            });
+            if(String(FB_WIFI_SSID) == mConfig->sys.stationSsid)
+                return; // no station wifi defined
 
             WiFi.setHostname(mConfig->sys.deviceName);
             #if !defined(AP_ONLY)
                 WiFi.setScanMethod(WIFI_ALL_CHANNEL_SCAN);
                 WiFi.setSortMethod(WIFI_CONNECT_AP_BY_SIGNAL);
                 WiFi.begin(mConfig->sys.stationSsid, mConfig->sys.stationPwd, WIFI_ALL_CHANNEL_SCAN);
+                mWifiConnecting = true;
 
                 DBGPRINT(F("connect to network '"));
                 DBGPRINT(mConfig->sys.stationSsid);
@@ -34,24 +33,19 @@ class AhoyWifi : public AhoyNetwork {
             #endif
         }
 
-        void tickNetworkLoop() override {
-            if(mAp.isEnabled())
-                mAp.tickLoop();
-
-            switch(mStatus) {
-                case NetworkState::DISCONNECTED:
-                    if(mConnected) {
-                        mConnected = false;
-                        mOnNetworkCB(false);
-                        MDNS.end();
-                        begin();
+        void OnEvent(WiFiEvent_t event) override {
+            switch(event) {
+                case SYSTEM_EVENT_STA_CONNECTED:
+                    if(NetworkState::CONNECTED != mStatus) {
+                        mStatus = NetworkState::CONNECTED;
+                        mWifiConnecting = false;
+                        DPRINTLN(DBG_INFO, F("Network connected"));
+                        setStaticIp();
                     }
                     break;
 
-                case NetworkState::CONNECTED:
-                    break;
-
-                case NetworkState::GOT_IP:
+                case SYSTEM_EVENT_STA_GOT_IP:
+                    mStatus = NetworkState::GOT_IP;
                     if(mAp.isEnabled())
                         mAp.disable();
 
@@ -62,12 +56,42 @@ class AhoyWifi : public AhoyNetwork {
                         mOnNetworkCB(true);
                     }
                     break;
+
+                case ARDUINO_EVENT_WIFI_STA_LOST_IP:
+                    [[fallthrough]];
+                case ARDUINO_EVENT_WIFI_STA_STOP:
+                    [[fallthrough]];
+                case SYSTEM_EVENT_STA_DISCONNECTED:
+                    mStatus = NetworkState::DISCONNECTED;
+                    if(mConnected) {
+                        mConnected = false;
+                        mOnNetworkCB(false);
+                        MDNS.end();
+                        WiFi.disconnect();
+                        begin();
+                    }
+                    break;
+
+                default:
+                    break;
             }
         }
 
+        void tickNetworkLoop() override {
+            if(mAp.isEnabled())
+                mAp.tickLoop();
+        }
+
         String getIp(void) override {
             return WiFi.localIP().toString();
         }
+
+    private:
+        void setStaticIp() override {
+            setupIp([this](IPAddress ip, IPAddress gateway, IPAddress mask, IPAddress dns1, IPAddress dns2) -> bool {
+                return WiFi.config(ip, gateway, mask, dns1, dns2);
+            });
+        }
 };
 
 #endif /*ESP32 & !ETHERNET*/

src/network/AhoyWifiEsp8266.h

@@ -18,11 +18,6 @@ class AhoyWifi : public AhoyNetwork {
         void begin() override {
             mAp.enable();
 
-            // static IP
-            setupIp([this](IPAddress ip, IPAddress gateway, IPAddress mask, IPAddress dns1, IPAddress dns2) -> bool {
-                return WiFi.config(ip, gateway, mask, dns1, dns2);
-            });
-
             WiFi.setHostname(mConfig->sys.deviceName);
             mBSSIDList.clear();
         }
@@ -37,6 +32,7 @@ class AhoyWifi : public AhoyNetwork {
                 case NetworkState::DISCONNECTED:
                     if(mConnected) {
                         mConnected = false;
+                        mWifiConnecting = false;
                         mOnNetworkCB(false);
                         mAp.enable();
                         MDNS.end();
@@ -76,16 +72,19 @@ class AhoyWifi : public AhoyNetwork {
                     }
                     DBGPRINTLN("");
                     WiFi.begin(mConfig->sys.stationSsid, mConfig->sys.stationPwd, 0, &bssid[0]);
+                    mWifiConnecting = true;
                     break;
 
                 case NetworkState::CONNECTING:
                     if (isTimeout(TIMEOUT)) {
                         WiFi.disconnect();
+                        mWifiConnecting = false;
                         mStatus = mBSSIDList.empty() ? NetworkState::DISCONNECTED : NetworkState::SCAN_READY;
                     }
                     break;
 
                 case NetworkState::CONNECTED:
+                    setStaticIp();
                     break;
 
                 case NetworkState::GOT_IP:
@@ -117,6 +116,12 @@ class AhoyWifi : public AhoyNetwork {
         }
 
     private:
+        void setStaticIp() override {
+            setupIp([this](IPAddress ip, IPAddress gateway, IPAddress mask, IPAddress dns1, IPAddress dns2) -> bool {
+                return WiFi.config(ip, gateway, mask, dns1, dns2);
+            });
+        }
+
         bool getBSSIDs() {
             bool result = false;
             int n = WiFi.scanComplete();

src/plugins/Display/epdHal.h

@@ -55,7 +55,6 @@ class epdHal: public GxEPD2_HalInterface, public SpiPatcherHandle {
             gpio_set_level(mPinClk, 0);
 
             gpio_reset_pin(mPinCs);
-            request_spi();
             spi_device_interface_config_t devcfg = {
                 .command_bits = 0,
                 .address_bits = 0,
@@ -73,7 +72,6 @@ class epdHal: public GxEPD2_HalInterface, public SpiPatcherHandle {
                 .post_cb = nullptr
             };
             mSpiPatcher->addDevice(mHostDevice, &devcfg, &spi);
-            release_spi();
 
             if(GPIO_NUM_NC != mPinRst) {
                 gpio_reset_pin(mPinRst);

src/utils/spiPatcher.h

@@ -22,11 +22,19 @@ class SpiPatcher {
             // Use binary semaphore instead of mutex for performance reasons
             mutex = xSemaphoreCreateBinaryStatic(&mutex_buffer);
             xSemaphoreGive(mutex);
+            mDev = dev;
+            mBusState = ESP_FAIL;
+        }
+
+    public:
+        SpiPatcher(const SpiPatcher &other) = delete;
+        void operator=(const SpiPatcher &) = delete;
 
-            spi_bus_config_t buscfg = {
-                .mosi_io_num = -1,
-                .miso_io_num = -1,
-                .sclk_io_num = -1,
+        esp_err_t initBus(int mosi = -1, int miso = -1, int sclk = -1, spi_common_dma_t dmaType = SPI_DMA_DISABLED) {
+            mBusConfig = spi_bus_config_t {
+                .mosi_io_num = mosi,
+                .miso_io_num = miso,
+                .sclk_io_num = sclk,
                 .quadwp_io_num = -1,
                 .quadhd_io_num = -1,
                 .data4_io_num = -1,
@@ -37,21 +45,25 @@ class SpiPatcher {
                 .flags = 0,
                 .intr_flags = 0
             };
-            ESP_ERROR_CHECK(spi_bus_initialize(dev, &buscfg, SPI_DMA_DISABLED));
-        }
+            ESP_ERROR_CHECK((mBusState = spi_bus_initialize(mDev, &mBusConfig, dmaType)));
 
-    public:
-        SpiPatcher(const SpiPatcher &other) = delete;
-        void operator=(const SpiPatcher &) = delete;
+            return mBusState;
+        }
 
-        static SpiPatcher* getInstance(spi_host_device_t dev) {
+        static SpiPatcher* getInstance(spi_host_device_t dev, bool initialize = true) {
             if(SPI2_HOST == dev) {
-                if(nullptr == InstanceHost2)
+                if(nullptr == InstanceHost2) {
                     InstanceHost2 = new SpiPatcher(dev);
+                    if(initialize)
+                        InstanceHost2->initBus();
+                }
                 return InstanceHost2;
             } else { // SPI3_HOST
-                if(nullptr == InstanceHost3)
+                if(nullptr == InstanceHost3) {
                     InstanceHost3 = new SpiPatcher(dev);
+                    if(initialize)
+                        InstanceHost3->initBus();
+                }
                 return InstanceHost3;
             }
         }
@@ -59,6 +71,7 @@ class SpiPatcher {
         ~SpiPatcher() { vSemaphoreDelete(mutex); }
 
         inline void addDevice(spi_host_device_t host_id, const spi_device_interface_config_t *dev_config, spi_device_handle_t *handle) {
+            assert(mBusState == ESP_OK);
             if(SPI2_HOST == host_id)
                 mHost2Cnt++;
             if(SPI3_HOST == host_id)
@@ -71,6 +84,7 @@ class SpiPatcher {
         }
 
         inline void request(SpiPatcherHandle* handle) {
+            assert(mBusState == ESP_OK);
             xSemaphoreTake(mutex, portMAX_DELAY);
 
             if (mCurHandle != handle) {
@@ -85,6 +99,7 @@ class SpiPatcher {
         }
 
         inline void release() {
+            assert(mBusState == ESP_OK);
             xSemaphoreGive(mutex);
         }
 
@@ -97,6 +112,9 @@ class SpiPatcher {
         SemaphoreHandle_t mutex;
         StaticSemaphore_t mutex_buffer;
         uint8_t mHost2Cnt = 0, mHost3Cnt = 0;
+        spi_host_device_t mDev = SPI3_HOST;
+        esp_err_t mBusState = ESP_FAIL;
+        spi_bus_config_t mBusConfig;
 };
 
 #endif /*ESP32*/

src/web/html/wizard.html

@@ -232,7 +232,7 @@
                     ml("div", {class: "row my-4"}, ml("div", {class: "col a-r"}, ml("input", {type: "button", class:"btn hide", id: "btn", value: "{#BTN_FINISH}", onclick: () => {redirect()}}, null))),
                     ml("div", {class: "row mt-5"}, ml("div", {class: "col a-c"}, ml("a", {onclick: () => {redirect()}}, "{#STOP_WIZARD}")))
                 )
-                v = setInterval(() => {getAjax('/api/setup/getip', printIp)}, 500);
+                v = setInterval(() => {getAjax('/api/setup/getip', printIp)}, 1000);
             }
 
             function redirect() {
@@ -240,7 +240,7 @@
             }
 
             function printIp(obj) {
-                if("0.0.0.0" != obj["ip"]) {
+                if("0.0.0.0" != obj.ip) {
                     clearInterval(v)
                     setHide("btn", false)
                     document.getElementById("state").innerHTML = "{#NETWORK_SUCCESS}" + obj.ip
@@ -272,12 +272,12 @@
                 getAjax("/api/setup", ((o) => c.append(step1(o.eth))));
                 /*ELSE*/
                 function nets(obj) {
+                    clearInterval(v)
+                    v = setInterval(() => {getAjax('/api/setup/networks', nets)}, 4000)
+
                     if(!obj.success)
                         return;
 
-                    clearInterval(v)
-                    v = setInterval(() => {getAjax('/api/setup/networks', nets)}, 5000)
-
                     var e = document.getElementById("net");
                     if(obj.networks.length > 0) {
                         var a = []
@@ -289,7 +289,8 @@
                         e.replaceChildren(...a)
                     }
 
-                    redirIp = obj.ip + "/index"
+                    if("0.0.0.0" != obj.ip)
+                        redirIp = "http://" + obj.ip + "/index"
                 }
 
                 c.append(step1())