Merge pull request #6 from stefan123t/patch-1

Update getting-started-ESP8266.md

doc/getting-started-ESP8266.md

@@ -1,28 +1,45 @@
 # Getting Started with an ESP8266
 
-```
 Wire Connections
 
+```ditaa
     +-----------+          +-----------+
-    | nRF24L01+ |--colour--| ESP8266   |
+    |  ESP8266  |--colour--| nRF24L01+ |
     |           |          |           |
-    |       GND |---black--| GND       |
-    |       VCC |----red---| +3.3V     |
-    |        CE |---grey---| D4        |
-    |       CSN |--purple--| D8        |
-    |       SCK |---blue---| D5        |
-    |      MOSI |---green--| D7        |
-    |      MISO |---brown--| D6        |
-    |       IRQ |--yellow--| D3        |
+    |       GND |---black--|[GND]      |
+    |     +3.3V |----red---| VCC       |
+    |        D4 |---grey---| CE        |
+    |        D8 |--purple--| CSN       |
+    |        D5 |---blue---| SCK       |
+    |        D7 |---green--| MOSI      |
+    |        D6 |---brown--| MISO      |
+    |        D3 |--yellow--| IRQ       |
     +-----------+          +-----------+
 ```
 
 ![plot](./AhoyMiles_bb.png)
 
-See
+Fritzing diagrams & schematics
+* [AhoyMiles_bb.png](./AhoyMiles_bb.png)
+* [AhoyMiles_schem.png](./AhoyMiles_schem.png)
+* [AhoyMiles.fzz](./AhoyMiles.fzz)
+
+Libraries to be installed in Arduino IDE:
+* RF24
+* TimeLib
 
-* AhoyMiles_bb.png
-* AhoyMiles_schem.png
-* AhoyMiles.fzz
+Verify & Compile
+* Connect to WiFi Network `ESP AHOY`
+* Use password `esp_8266`
+* Connect to Network settings 
 
-by "isnoAhoy"
+Setup
+* WiFi 
+  * Enter SSID `mynetwork`
+  * Enter Password `mypassword`
+* Device Host Name
+  * Enter Device Name `esp-ahoy` 
+* General
+  * Hoymiles Address (e.g. 114173123456) `11:41:73:12:34:56`
+  * [x] Reboot device after successful save
+Save