vanhofen
5 years ago
4 changed files with 600 additions and 513 deletions
@ -0,0 +1,594 @@ |
|||
From 1d8158ae37abd429df9b00ee9b77b6667b7f2f47 Mon Sep 17 00:00:00 2001 |
|||
From: vanhofen <vanhofen@gmx.de> |
|||
Date: Mon, 15 Jun 2020 16:52:53 +0200 |
|||
Subject: [PATCH] strip graphlcd.conf |
|||
|
|||
---
|
|||
graphlcd.conf | 553 +------------------------------------------------- |
|||
1 file changed, 3 insertions(+), 550 deletions(-) |
|||
|
|||
diff --git a/graphlcd.conf b/graphlcd.conf
|
|||
index becdd54..4b59fc2 100644
|
|||
--- a/graphlcd.conf
|
|||
+++ b/graphlcd.conf
|
|||
@@ -29,7 +29,7 @@ WaitMethod=3
|
|||
# Select the process priority that is used when sleeping. |
|||
# Possible values: -20 <= x <= 19 |
|||
# Default value: 0 |
|||
-WaitPriority=0
|
|||
+WaitPriority=19
|
|||
|
|||
# General driver settings |
|||
# This section lists the display settings that are parsed and |
|||
@@ -117,487 +117,6 @@ WaitPriority=0
|
|||
|
|||
######################################################################## |
|||
|
|||
-[framebuffer]
|
|||
-# framebuffer driver
|
|||
-# Output goes to a framebuffer device
|
|||
-Driver=framebuffer
|
|||
-
|
|||
-#UpsideDown=no
|
|||
-#Invert=no
|
|||
-
|
|||
-# Device
|
|||
-# Framebuffer device
|
|||
-# Default value: /dev/fb0
|
|||
-#Device=/dev/fb0
|
|||
-
|
|||
-# Damage | ReportDamage
|
|||
-# Damage reporting for framebuffer devices with update problems
|
|||
-# Possible values: none, auto, udlfb, ugly
|
|||
-# none: no damage reporting
|
|||
-# auto: automatic determination if damage reporting is needed
|
|||
-# udlfb: damage reporting for udlfb-devices (displaylink)
|
|||
-# ugly: dirty damagereporting (a '\n' is written to the framebuffer file handle)
|
|||
-# Default value: none
|
|||
-#Damage=none
|
|||
-
|
|||
-# Zoom
|
|||
-# Determines if pixels should be drawn double sized.
|
|||
-# If zoom is set, the actual resolution will be halved (both width and height)
|
|||
-# e.g.: framebuffer has resolution 800x600: this driver will report a drawing area of 400x300
|
|||
-# Possible values: 0, 1
|
|||
-# Default value: 1
|
|||
-Zoom=1
|
|||
-
|
|||
-########################################################################
|
|||
-
|
|||
-[gu140x32f]
|
|||
-# gu140x32f driver
|
|||
-# This is an 8-bit driver module for Noritake GU140x32-F7806 VFD
|
|||
-# displays. The VFD is operating in it's 8 bit-mode connected to a
|
|||
-# single PC parallel port.
|
|||
-# Default size: 140 x 32
|
|||
-Driver=gu140x32f
|
|||
-
|
|||
-Device=/dev/parport0
|
|||
-#Port=0x378
|
|||
-#Width=140
|
|||
-#Height=32
|
|||
-#UpsideDown=no
|
|||
-#Invert=no
|
|||
-#Brightness=100
|
|||
-#AdjustTiming=0
|
|||
-#RefreshDisplay=1
|
|||
-
|
|||
-# Wiring
|
|||
-# Select the type of wiring your display is connected with.
|
|||
-# Possible values: 'Standard', 'Windows'
|
|||
-# Default value: 'Standard'
|
|||
-Wiring=Standard
|
|||
-
|
|||
-########################################################################
|
|||
-
|
|||
-[gu256x64-372]
|
|||
-# gu256x64-372 driver
|
|||
-# This is an 8-bit driver module for Noritake GU256x64-372 VFD
|
|||
-# displays. The VFD is operating in it's 8 bit-mode connected to a
|
|||
-# single PC parallel port.
|
|||
-# Default size: 256 x 64
|
|||
-Driver=gu256x64-372
|
|||
-
|
|||
-Device=/dev/parport0
|
|||
-#Port=0x378
|
|||
-#Width=256
|
|||
-#Height=64
|
|||
-#UpsideDown=no
|
|||
-#Invert=no
|
|||
-#Brightness=100
|
|||
-#AdjustTiming=0
|
|||
-#RefreshDisplay=1
|
|||
-
|
|||
-# Wiring
|
|||
-# Select the type of wiring your display is connected with.
|
|||
-# Possible values: 'Standard', 'Windows'
|
|||
-# Default value: 'Standard'
|
|||
-Wiring=Standard
|
|||
-
|
|||
-########################################################################
|
|||
-
|
|||
-[gu256x64-3900]
|
|||
-# gu256x64-3900 driver
|
|||
-# This is a driver module for Noritake GU256X64x-3900 VFD displays. The
|
|||
-# VFD is either operating in 8 bit-mode connected to a single PC
|
|||
-# parallel port or in serial mode connected to a single PC serial port.
|
|||
-# Default size: 256 x 64
|
|||
-Driver=gu256x64-3900
|
|||
-
|
|||
-Device=/dev/parport0
|
|||
-#Port=0x378
|
|||
-#Width=256
|
|||
-#Height=64
|
|||
-#UpsideDown=no
|
|||
-#Invert=no
|
|||
-#Brightness=100
|
|||
-#AdjustTiming=0
|
|||
-#RefreshDisplay=1
|
|||
-
|
|||
-# Wiring
|
|||
-# Select the type of wiring your display is connected with.
|
|||
-# Possible values: 'Standard', 'Satyr'
|
|||
-# Default value: 'Standard'
|
|||
-Wiring=Standard
|
|||
-
|
|||
-# Interface
|
|||
-# Select the interface your display is connnected to.
|
|||
-# Possible values: 'Parallel', 'Serial'
|
|||
-# Default value: 'Parallel'
|
|||
-Interface=Parallel
|
|||
-
|
|||
-# DMA
|
|||
-# Enables/disables the usage of the controller's DMA mode which
|
|||
-# increases writing speed. This only works in parallel interface mode.
|
|||
-# Possible values: 'yes', 'no'
|
|||
-# Default value: 'yes'
|
|||
-DMA=yes
|
|||
-
|
|||
-########################################################################
|
|||
-
|
|||
-[gu126x64D-K610A4]
|
|||
-# GU126x64D-K610A4 driver
|
|||
-# This is a driver module for Noritake GU126x64D-K610A4 VFD displays.
|
|||
-# The VFD is operating in 8 bit-mode connected to a single PC
|
|||
-# parallel port.
|
|||
-# Default size: 126 x 64
|
|||
-Driver=gu126x64D-K610A4
|
|||
-
|
|||
-Device=/dev/parport0
|
|||
-#Port=0x378
|
|||
-#Width=126
|
|||
-#Height=64
|
|||
-#UpsideDown=no
|
|||
-#Invert=no
|
|||
-#Brightness=100
|
|||
-#RefreshDisplay=1
|
|||
-#AdjustTiming=30
|
|||
-
|
|||
-# Debug some methods of the driver
|
|||
-# (add the values of interest)
|
|||
-#
|
|||
-# 1: show a log at the start of a refresh
|
|||
-# 2: show a log at the end of a refresh with timing information
|
|||
-# 4: show the rows (8 pixel) refreshed
|
|||
-# 8: show every commands/bytes sent to the display
|
|||
-# 16: log every unsuccessful waiting for display acknowledge
|
|||
-#
|
|||
-#Debug=0
|
|||
-
|
|||
-########################################################################
|
|||
-
|
|||
-[hd61830]
|
|||
-# hd61830 driver
|
|||
-# This is a driver module for the Hitachi HD61830 LCD controller.
|
|||
-# Default size: 240 x 128
|
|||
-Driver=hd61830
|
|||
-
|
|||
-Device=/dev/parport0
|
|||
-#Port=0x378
|
|||
-#Width=240
|
|||
-#Height=128
|
|||
-#UpsideDown=no
|
|||
-#Invert=no
|
|||
-#AdjustTiming=0
|
|||
-#RefreshDisplay=1
|
|||
-
|
|||
-########################################################################
|
|||
-
|
|||
-[image]
|
|||
-# image driver
|
|||
-# This is a driver module for writing image sequences in PBM (Portable
|
|||
-# Bit Map) format that show the plugin's output.
|
|||
-# Default size: 240 x 128
|
|||
-Driver=image
|
|||
-#Width=240
|
|||
-#Height=128
|
|||
-#UpsideDown=no
|
|||
-#Invert=no
|
|||
-
|
|||
-########################################################################
|
|||
-
|
|||
-[ks0108]
|
|||
-# ks0108 driver
|
|||
-# This is a driver module for the Samsung KS0108 LCD controller.
|
|||
-# Default size: 128 x 64
|
|||
-Driver=ks0108
|
|||
-
|
|||
-Device=/dev/parport0
|
|||
-#Port=0x378
|
|||
-Width=128
|
|||
-#Width=192
|
|||
-#Height=64
|
|||
-#UpsideDown=no
|
|||
-#Invert=no
|
|||
-#AdjustTiming=0
|
|||
-#RefreshDisplay=1
|
|||
-
|
|||
-# Control
|
|||
-# Select the variant of triggering the display's control lines.
|
|||
-# Possible values: '0', '1'
|
|||
-# Default value: '1'
|
|||
-Control=1
|
|||
-
|
|||
-########################################################################
|
|||
-
|
|||
-[sed1330]
|
|||
-# sed1330 driver
|
|||
-# This is a driver module for the Epson SED1330/1335 LCD controller.
|
|||
-# Default size: 320 x 240
|
|||
-Driver=sed1330
|
|||
-
|
|||
-Device=/dev/parport0
|
|||
-#Port=0x378
|
|||
-#Width=320
|
|||
-#Height=240
|
|||
-#UpsideDown=no
|
|||
-#Invert=no
|
|||
-#AdjustTiming=0
|
|||
-#refreshDisplay=1
|
|||
-
|
|||
-# Wiring
|
|||
-# Select the type of wiring your display is connected with.
|
|||
-# Possible values: 'Original', 'PowerLCD', 'LCDProc', 'Tweakers',
|
|||
-# 'YASEDW'
|
|||
-# Default value: 'Original'
|
|||
-Wiring=Original
|
|||
-
|
|||
-# OscillatorFrequency
|
|||
-# Select the frequency the oscillator on your LCD board uses in kHz.
|
|||
-# Possible values: 1000 <= x <= 15000)
|
|||
-# Default value: 9600
|
|||
-OscillatorFrequency=9600
|
|||
-
|
|||
-# Interface
|
|||
-# Select the interface mode your display is connected with.
|
|||
-# Possible values: '6800', '8080'
|
|||
-# Default value: '6800'
|
|||
-Interface=6800
|
|||
-
|
|||
-########################################################################
|
|||
-
|
|||
-[sed1520]
|
|||
-# sed1520 driver
|
|||
-# This is a driver module for the Epson SED1520 LCD controller.
|
|||
-# Default size: 120 x 32
|
|||
-Driver=sed1520
|
|||
-
|
|||
-Device=/dev/parport0
|
|||
-#Port=0x378
|
|||
-#Width=120
|
|||
-#Height=32
|
|||
-#UpsideDown=no
|
|||
-#Invert=no
|
|||
-#AdjustTiming=0
|
|||
-#RefreshDisplay=1
|
|||
-
|
|||
-########################################################################
|
|||
-
|
|||
-[simlcd]
|
|||
-# simlcd driver
|
|||
-# This is the SimLCD driver module. Output goes to a file instead of
|
|||
-# LCD. Use SimLCD tool to view this file.
|
|||
-# Default size: 240 x 128
|
|||
-Driver=simlcd
|
|||
-#Width=240
|
|||
-#Height=128
|
|||
-#UpsideDown=no
|
|||
-#Invert=no
|
|||
-
|
|||
-########################################################################
|
|||
-
|
|||
-[t6963c]
|
|||
-# t6963c driver
|
|||
-# This is a driver module for the Toshiba T6963C LCD controller.
|
|||
-# Default size: 240 x 128
|
|||
-Driver=t6963c
|
|||
-
|
|||
-Device=/dev/parport0
|
|||
-#Port=0x378
|
|||
-#Width=240
|
|||
-#Height=128
|
|||
-#UpsideDown=no
|
|||
-#Invert=no
|
|||
-#RefreshDisplay=1
|
|||
-
|
|||
-# Wiring
|
|||
-# Select the type of wiring your display is connected with.
|
|||
-# Possible values: 'Standard', 'Windows', 'Serial'
|
|||
-# Default value: 'Standard'
|
|||
-Wiring=Standard
|
|||
-
|
|||
-# FontSelect
|
|||
-# Select the font width your display uses for text mode. In most cases
|
|||
-# this is selectable through one of the pins of your LCD board
|
|||
-# Possible values: '6', '8'
|
|||
-# Default value: '6'
|
|||
-FontSelect=6
|
|||
-
|
|||
-# AutoMode
|
|||
-# Enables or disables the usage of T6963C's auto mode which doubles
|
|||
-# writing speed when enabled.
|
|||
-# Possible values: 'yes', 'no'
|
|||
-# Default value: 'yes'
|
|||
-AutoMode=yes
|
|||
-
|
|||
-# StatusCheck
|
|||
-# Enables or disables the usage of T6963C's status check. When using a
|
|||
-# shielded cable for connecting your display, the disabling may be
|
|||
-# possible. This results in doubling the speed of writing data to the
|
|||
-# LCD.
|
|||
-# Possible values: 'yes', 'no'
|
|||
-# Default value: 'yes'
|
|||
-StatusCheck=yes
|
|||
-
|
|||
-########################################################################
|
|||
-
|
|||
-[serdisp]
|
|||
-Driver=serdisp
|
|||
-# Controller
|
|||
-# Select the serdisplib name of your display.
|
|||
-# Possible values: See README in serdisplib package or http://serdisplib.sourceforge.net
|
|||
-#Controller=nokia7110
|
|||
-#Controller=sed1335
|
|||
-Controller=optrex323
|
|||
-#Controller=l4m132c
|
|||
-#Controller=l4m320t
|
|||
-
|
|||
-# Options
|
|||
-# Pass display specific options
|
|||
-# Possible values: See driver-specific hardware page at http://serdisplib.sourceforge.net
|
|||
-#
|
|||
-# IMPORTANT: when using generic controllers like sed1330,sed1335,t6963c, width and height
|
|||
-# need to be set here (if different from default settings)!
|
|||
-# (serdisplib needs to be extended to be able to use 'Width' and 'Height'
|
|||
-# settings directly - this will be added later)
|
|||
-#
|
|||
-#Options=MODE=8080
|
|||
-#Options=DELAY=2000;FONTWIDTH=8;CHECK=1
|
|||
-#Options=WIDTH=128;HEIGHT=64
|
|||
-#Options=WIDTH=128;HEIGHT=64;DELAY=2000;FONTWIDTH=8;CHECK=1
|
|||
-
|
|||
-# Wiring
|
|||
-# Select Wiring
|
|||
-# Possible values: See driver-specific hardware page at http://serdisplib.sourceforge.net
|
|||
-#Wiring=1
|
|||
-#Wiring=PowerLCD
|
|||
-#Wiring=DATA8,CS:nAUTO,A0:INIT,WR:nSTRB,RD:nSELIN
|
|||
-
|
|||
-# FGColour
|
|||
-# Drawing colour for non-monochrome displays
|
|||
-# Possible values: 0xRRGGBB (eg.: 0xFF0000)
|
|||
-# Defaults to black (0x000000) if not set
|
|||
-#FGColour=0x000000
|
|||
-
|
|||
-# BGColour
|
|||
-# Background colour for non-monochrome displays
|
|||
-# Possible values: 0xRRGGBB (eg.: 0x00FFFF)
|
|||
-# Defaults to white (0xFFFFFF) if not set
|
|||
-#BGColour=0xFFFFFF
|
|||
-
|
|||
-Device=/dev/parport0
|
|||
-#Port=0x378
|
|||
-#Device=HID:/dev/usb/hiddev0
|
|||
-#Device=HID:/dev/hiddev0
|
|||
-#Device=USB:USB:4243/ee20 # Linux4Media 320T TouchLCD
|
|||
-#UpsideDown=no
|
|||
-#Invert=no
|
|||
-Contrast=5
|
|||
-Backlight=yes
|
|||
-
|
|||
-# Settings 'Width' and 'Height' are ignored at the moment. For generic controllers # (sed1330/1335, t6963) width and height need to be set using setting 'Options' (look above)
|
|||
-##Width=240
|
|||
-##Height=128
|
|||
-
|
|||
-########################################################################
|
|||
-
|
|||
-[noritake800]
|
|||
-# noritake800 driver
|
|||
-# This is an 8-bit driver module for Noritake Noritake 800(A) series VFD
|
|||
-# displays. The VFD is operating in it's 8 bit-mode connected to a
|
|||
-# single PC parallel port.
|
|||
-# Default size: 128 x 64
|
|||
-Driver=noritake800
|
|||
-
|
|||
-Device=/dev/parport0
|
|||
-#Port=0x378
|
|||
-Width=128
|
|||
-Height=64
|
|||
-#UpsideDown=no
|
|||
-#Invert=no
|
|||
-Brightness=50
|
|||
-AdjustTiming=50
|
|||
-RefreshDisplay=50
|
|||
-
|
|||
-# Wiring
|
|||
-# Select the type of wiring your display is connected with.
|
|||
-# Possible values: 'LiquidMp3', 'MZ'
|
|||
-# Default value: 'LiquidMp3'
|
|||
-Wiring=LiquidMp3
|
|||
-
|
|||
-########################################################################
|
|||
-
|
|||
-[avrctl]
|
|||
-# avrctl driver
|
|||
-# This is an driver module for my AVR controlled LCD display connected via
|
|||
-# USB port. It uses some simple commands to update the display content.
|
|||
-# Default size: 256 x 128
|
|||
-Driver=avrctl
|
|||
-Device=/dev/ttyUSB0
|
|||
-Width=256
|
|||
-Height=128
|
|||
-#UpsideDown=no
|
|||
-#Invert=no
|
|||
-Brightness=50
|
|||
-RefreshDisplay=1
|
|||
-
|
|||
-########################################################################
|
|||
-
|
|||
-[g15daemon]
|
|||
-# pseudo device for the g15daemon meta driver
|
|||
-# Output goes to the g15daemon which then displays it
|
|||
-Driver=g15daemon
|
|||
-Width=160
|
|||
-Height=43
|
|||
-
|
|||
-########################################################################
|
|||
-
|
|||
-[network]
|
|||
-# network driver
|
|||
-# Default size: 240 x 128
|
|||
-Driver=network
|
|||
-Width=256
|
|||
-Height=128
|
|||
-UpsideDown=no
|
|||
-Invert=no
|
|||
-Brightness=10
|
|||
-RefreshDisplay=1
|
|||
-
|
|||
-########################################################################
|
|||
-
|
|||
-[dm140gink]
|
|||
-# dm140gink driver
|
|||
-# This is an driver module for Futaba DM140-GINK VFD displays.
|
|||
-# The VFD is built-in in some HTPC cases and connected to a
|
|||
-# USB port.
|
|||
-# Default size: 112 x 16
|
|||
-Driver=dm140gink
|
|||
-#Width=112
|
|||
-#Height=16
|
|||
-#UpsideDown=no
|
|||
-
|
|||
-# Invertion is not supported
|
|||
-#Invert=no
|
|||
-
|
|||
-# USB VendorID and ProductID
|
|||
-#Vendor=0x040b
|
|||
-#Product=0x7001
|
|||
-# USB ID activy 5xx:
|
|||
-#Vendor=0x1509
|
|||
-#Product=0x925d
|
|||
-########################################################################
|
|||
-
|
|||
-[futabaMDM166A]
|
|||
-# futabaMDM166A driver
|
|||
-# This is an driver module for Futaba MDM166A VFD displays.
|
|||
-# The VFD is built-in in Targa HTPC cases and connected to USB port.
|
|||
-# Default size: 96 x 16
|
|||
-Driver=futabaMDM166A
|
|||
-
|
|||
-#Width=96
|
|||
-#Height=16
|
|||
-#UpsideDown=no
|
|||
-#Invert=no
|
|||
-#Brightness=50
|
|||
-#RefreshDisplay=1000
|
|||
-########################################################################
|
|||
-
|
|||
[ax206dpf] |
|||
# THIS IS AN EXPERIMENTAL DRIVER! |
|||
# You have to uncomment the variable HAVE_DRIVER_AX206DPF |
|||
@@ -609,8 +128,8 @@ Driver=futabaMDM166A
|
|||
# |
|||
# Default size: 320 x 240 or 240 x 320 (see "Portrait") |
|||
Driver=ax206dpf |
|||
-#Width=320
|
|||
-#Height=240
|
|||
+Width=320
|
|||
+Height=240
|
|||
# |
|||
# UpsideDown |
|||
# Rotates the display output by 180 degrees. This might be useful, if |
|||
@@ -668,69 +187,3 @@ Driver=ax206dpf
|
|||
# Default value: 'nnnn' |
|||
#Flip=nnnn |
|||
# |
|||
-
|
|||
-########################################################################
|
|||
-
|
|||
-[vncserver]
|
|||
-# vncserver driver
|
|||
-# Output goes to a vncserver device
|
|||
-# Default size: 320 x 240
|
|||
-Driver=vncserver
|
|||
-Width=320
|
|||
-Height=240
|
|||
-#
|
|||
-# HttpDir
|
|||
-# Webclients directory of libvncserver installation (only needed for webclient access)
|
|||
-#HttpDir=/usr/share/webclients
|
|||
-
|
|||
-########################################################################
|
|||
-
|
|||
-[ssd1306]
|
|||
-# ssd1306 driver
|
|||
-# This is a driver module for the SSD1306 OLED display controller.
|
|||
-# Default size: 128 x 64
|
|||
-Driver=ssd1306
|
|||
-Device=0
|
|||
-Width=128
|
|||
-Height=64
|
|||
-
|
|||
-[ili9341]
|
|||
-# ili9341 driver
|
|||
-# This is a driver module for the ILI9341 TFT display controller.
|
|||
-# Default size: 320x240
|
|||
-Driver=ili9341
|
|||
-Device=0
|
|||
-Width=320
|
|||
-Height=240
|
|||
-
|
|||
-[alphacool]
|
|||
-# Driver setting for the Alphacool USB LCD (240x128 pixels)
|
|||
-# Requires serdisplib to be installed
|
|||
-Driver=serdisp
|
|||
-Controller=alphacool
|
|||
-Device=USB:060c/04eb
|
|||
-Backlight=yes
|
|||
-
|
|||
-[sdcmegtron]
|
|||
-# Driver setting for the SDC Megtron USB LCD (240x128 pixels)
|
|||
-# Requires serdisplib to be installed
|
|||
-Driver=serdisp
|
|||
-Controller=sdcmegtron
|
|||
-Device=USB:152a/8380
|
|||
-Backlight=yes
|
|||
-
|
|||
-[usbserlcd]
|
|||
-# This is the driver for displays based on the USBserLCD firmware:
|
|||
-# https://github.com/M-Reimer/usbserlcd
|
|||
-Driver=usbserlcd
|
|||
-Device=/dev/ttyUSB0
|
|||
-RefreshDisplay=0
|
|||
-
|
|||
-[st7565r-reel]
|
|||
-# st7565r driver
|
|||
-# This is a driver module for the ST7565R based Reelbox frontpanel LCD
|
|||
-# Default size: 128 x 64
|
|||
-Driver=st7565r-reel
|
|||
-Device=/dev/ttyS0
|
|||
-Brightness=100
|
|||
-Contrast=80
|
|||
--
|
|||
2.20.1 |
|||
|
|||
Loading…
Reference in new issue